Wind River Support Network

Description

Problem Description
=================
README not very well

Expected Behavior
================
It should be OK


Observed Behavior
================
+Since the PCIe connector on-board only exports PETP0/N0, PERP0/N0 and 3.3V
+pins, any mini-PCIe devices that use other PCIe pins won't be supported.
+WR only validated the following PCIe peripherals:

Generally speaking, the past tense should never be used in README above.
the present perfect tense or passive tense is highly recommended here.


+The ASRC supports following DMA channels: peripheral to peripheral (such as:
+ASRC to ESAI), memory to peripheral (such as memory to ASRC) and peripheral
+to memory (such as ASRC to memory). Since no ESAI audio codec support on the
+board, so just test memory to peripheral and peripheral to memory mode.

Update "Since no ESAI ...... to memory mode." with more readable phrase. 

Workaround

N/A

Steps to Reproduce

refer to fsl-imx6/README

Other Downloads

• Wind River Linux 5.0.1.1
• Wind River Linux CGP 5.0.1.1
• Wind River Linux 5.0.1.2
• Wind River Linux CGP 5.0.1.2
• Wind River Linux 5.0.1.3
• Wind River Linux 5.0.1.4
• Wind River Linux 5.0.1.5
• Wind River Linux 5.0.1.6
• Wind River Linux 5.0.1.7
• Wind River Linux 5.0.1.8
• Wind River Linux 5.0.1.9
• Wind River Linux 5.0.1.10
• Wind River Linux 5.0.1.11
• Wind River Linux 5.0.1.12
• Wind River Linux 5.0.1.13
• Wind River Linux 5.0.1.14
• Wind River Linux 5.0.1.15
• Wind River Linux 5.0.1.16
• Wind River Linux 5.0.1.17
• Wind River Linux 5.0.1.18
• Wind River Linux 5.0.1.19
• Wind River Linux 5.0.1.20
• Wind River Linux 5.0.1.21
• Wind River Linux 5.0.1.22
• Wind River Linux 5.0.1.23
• Wind River Linux 5.0.1.24
• Wind River Linux 5.0.1.25
• Wind River Linux 5.0.1.26
• Wind River Linux 5.0.1.27
• Wind River Linux 5.0.1.28
• Wind River Linux 5.0.1.29
• Wind River Linux 5.0.1.30
• Wind River Linux 5.0.1.31
• Wind River Linux 5.0.1.32
• Wind River Linux 5.0.1.33
• Wind River Linux 5.0.1.34
• Wind River Linux 5.0.1.35