Fixed
Created: Nov 5, 2014
Updated: Sep 8, 2018
Resolved Date: Dec 24, 2014
Found In Version: 7.0
Fix Version: 7.0.0.1
Severity: Standard
Applicable for: Wind River Linux 7
Component/s: BSP
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 144 CPUs, 72 hotplug CPUs
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:144 nr_node_ids:2
PERCPU: Embedded 14 pages/cpu @ec820000 s35072 r0 d22272 u57344
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3638190
Policy zone: HighMem
Kernel command line: console=ttyS0,115200 root=/dev/nfs nfsroot=128.224.165.20:/export/pxeboot/vlm-boards/22603/rootfs rw ip=dhcp mem=16G
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
xsave: enabled xstate_bv 0x7, cntxt size 0x340
allocated 134217696 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000363fe:00400000)
Initializing Movable for node 0 (00000000:00000000)
Memory: 14255952K/14559704K available (9515K kernel code, 661K rwdata, 3300K rodata, 820K init, 1016K bss, 303752K reserved, 13671276K highmem)
virtual kernel memory layout:
fixmap : 0xfebb7000 - 0xfffff000 (20768 kB)
pkmap : 0xfe400000 - 0xfe600000 (2048 kB)
vmalloc : 0xf6bfe000 - 0xfe3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf63fe000 ( 867 MB)
.init : 0xc1d2d000 - 0xc1dfa000 ( 820 kB)
.data : 0xc194b2dd - 0xc1d2b700 (3969 kB)
.text : 0xc1000000 - 0xc194b2dd (9516 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=144, Nodes=2
Preemptible hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=144.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=144
NR_IRQS:16640 nr_irqs:2648 16
Console: colour VGA+ 80x25
console [ttyS0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.734 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.46 BogoMIPS (lpj=2294734)
pid_max: default: 32768 minimum: 1152
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys debug
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys files
Initializing cgroup subsys vm
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 36K (c1dfa000 - c1e03000)
ftrace: allocating 34158 entries in 67 pages
Overriding APIC driver with bigsmp
Enabling APIC mode: Physflat. Using 3 I/O APICs
Leaving ESR disabled.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz (fam: 06, model: 3f, stepping: 02)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
Initializing CPU#1
Leaving ESR disabled.
#2
Initializing CPU#2
Leaving ESR disabled.
#3
Initializing CPU#3
Leaving ESR disabled.
#4
Initializing CPU#4
Leaving ESR disabled.
#5
Initializing CPU#5
Leaving ESR disabled.
#6
Initializing CPU#6
Leaving ESR disabled.
#7
Initializing CPU#7
Leaving ESR disabled.
#8
Initializing CPU#8
Leaving ESR disabled.
#9
Initializing CPU#9
Leaving ESR disabled.
#10
Initializing CPU#10
Leaving ESR disabled.
#11
Initializing CPU#11
Leaving ESR disabled.
#12
Initializing CPU#12
Leaving ESR disabled.
#13
Initializing CPU#13
Leaving ESR disabled.
#14
Initializing CPU#14
Leaving ESR disabled.
#15
Initializing CPU#15
Leaving ESR disabled.
#16
Initializing CPU#16
Leaving ESR disabled.
#17
Initializing CPU#17
Leaving ESR disabled.
#18
Initializing CPU#18
Leaving ESR disabled.
#19
Initializing CPU#19
Leaving ESR disabled.
#20
Initializing CPU#20
Leaving ESR disabled.
#21
Initializing CPU#21
Leaving ESR disabled.
#22
Initializing CPU#22
Leaving ESR disabled.
#23
Initializing CPU#23
Leaving ESR disabled.
#24
Initializing CPU#24
Leaving ESR disabled.
#25
Initializing CPU#25
Leaving ESR disabled.
#26
Initializing CPU#26
Leaving ESR disabled.
#27
Initializing CPU#27
Leaving ESR disabled.
#28
Initializing CPU#28
Leaving ESR disabled.
#29
Initializing CPU#29
Leaving ESR disabled.
#30
Initializing CPU#30
Leaving ESR disabled.
#31
Initializing CPU#31
Leaving ESR disabled.
#32
Initializing CPU#32
Leaving ESR disabled.
#33
Initializing CPU#33
Leaving ESR disabled.
#34
Initializing CPU#34
Leaving ESR disabled.
#35
Initializing CPU#35
Leaving ESR disabled.
#36
Initializing CPU#36
Leaving ESR disabled.
#37
Initializing CPU#37
Leaving ESR disabled.
#38
Initializing CPU#38
Leaving ESR disabled.
#39
Initializing CPU#39
Leaving ESR disabled.
#40
Initializing CPU#40
Leaving ESR disabled.
#41
Initializing CPU#41
Leaving ESR disabled.
#42
Initializing CPU#42
Leaving ESR disabled.
#43
Initializing CPU#43
Leaving ESR disabled.
#44
Initializing CPU#44
Leaving ESR disabled.
#45
Initializing CPU#45
Leaving ESR disabled.
#46
Initializing CPU#46
Leaving ESR disabled.
#47
Initializing CPU#47
Leaving ESR disabled.
#48
Initializing CPU#48
Leaving ESR disabled.
#49
Initializing CPU#49
Leaving ESR disabled.
#50
Initializing CPU#50
Leaving ESR disabled.
#51
Initializing CPU#51
Leaving ESR disabled.
#52
Initializing CPU#52
Leaving ESR disabled.
#53
Initializing CPU#53
Leaving ESR disabled.
#54
Initializing CPU#54
Leaving ESR disabled.
#55
Initializing CPU#55
Leaving ESR disabled.
#56
Initializing CPU#56
Leaving ESR disabled.
#57
Initializing CPU#57
Leaving ESR disabled.
#58
Initializing CPU#58
Leaving ESR disabled.
#59
Initializing CPU#59
Leaving ESR disabled.
#60
Initializing CPU#60
Leaving ESR disabled.
#61
Initializing CPU#61
Leaving ESR disabled.
#62
Initializing CPU#62
Leaving ESR disabled.
#63
Initializing CPU#63
Leaving ESR disabled.
#64
Initializing CPU#64
Leaving ESR disabled.
#65
Initializing CPU#65
Leaving ESR disabled.
#66
Initializing CPU#66
Leaving ESR disabled.
#67
Initializing CPU#67
Leaving ESR disabled.
#68
Initializing CPU#68
Leaving ESR disabled.
#69
Initializing CPU#69
Leaving ESR disabled.
#70
Initializing CPU#70
Leaving ESR disabled.
#71
Initializing CPU#71
Leaving ESR disabled.
x86: Booted up 1 node, 72 CPUs
smpboot: Total of 72 processors activated (330640.48 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x7accf000-0x7b6fefff] (10682368 bytes)
xor: automatically using best checksumming function:
avx : 19696.000 MB/sec
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
raid6: mmxx1 4359 MB/s
raid6: mmxx2 4542 MB/s
raid6: sse1x1 3753 MB/s
raid6: sse1x2 4523 MB/s
raid6: sse2x1 7535 MB/s
raid6: sse2x2 9250 MB/s
raid6: avx2x1 14613 MB/s
raid6: avx2x2 16652 MB/s
raid6: using algorithm avx2x2 (16652 MB/s)
raid6: using avx2x1 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD (null) 000102 (v02 INTEL SpsPrAgg 00000002 INTL 20130328)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131218/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:02: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: root bus resource [bus 7f]
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000cbfff] (conflicts with Video ROM [mem 0x000c0000-0x000c7fff])
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-7e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x1000-0x7fff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xc7ffbfff]
pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff]
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:02.2: System wakeup disabled by ACPI
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: System wakeup disabled by ACPI
acpiphp: Slot [528] registered
pci 0000:00:01.0: PCI bridge to [bus 01]
acpiphp: Slot [512] registered
pci 0000:00:02.0: PCI bridge to [bus 02]
acpiphp: Slot [0] registered
pci 0000:00:02.2: PCI bridge to [bus 03-04]
pci 0000:00:02.2: can't handle 64-bit address space for bridge
acpiphp: Slot [785] registered
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [bus 80-fe]
pci_bus 0000:80: root bus resource [io 0x8000-0xffff]
pci_bus 0000:80: root bus resource [mem 0xc8000000-0xfbffbfff]
pci_bus 0000:80: root bus resource [mem 0x384000000000-0x387fffffffff]
ACPI: Enabled 4 GPEs in block 00 to 3F
vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:06:00.0
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
Advanced Linux Sound Architecture Driver Initialized.
PCI: Using ACPI for IRQ routing
pci 0000:03:00.0: no compatible bridge window for [mem 0x383fffc00000-0x383fffdfffff 64bit pref]
pci 0000:03:00.0: no compatible bridge window for [mem 0x383fffe04000-0x383fffe07fff 64bit pref]
pci 0000:03:00.1: no compatible bridge window for [mem 0x383fffa00000-0x383fffbfffff 64bit pref]
pci 0000:03:00.1: no compatible bridge window for [mem 0x383fffe00000-0x383fffe03fff 64bit pref]
pci 0000:ff:1e.3: no compatible bridge window for [io 0x0014-0x0017]
pci 0000:7f:1e.3: no compatible bridge window for [io 0x0014-0x0017]
Bluetooth: Core ver 2.18
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:06: [io 0x0500-0x053f] has been reserved
system 00:06: [io 0x0400-0x047f] could not be reserved
system 00:06: [io 0x0540-0x057f] has been reserved
system 00:06: [io 0x0600-0x061f] has been reserved
system 00:06: [io 0x0ca0-0x0ca5] has been reserved
system 00:06: [io 0x0880-0x0883] has been reserved
system 00:06: [io 0x0800-0x081f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:06: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:06: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:06: [mem 0xfed1b000-0xfed1bfff] has been reserved
pnp: PnP ACPI: found 10 devices
pci 0000:06:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:ff:1e.3: BAR 0: can't assign io (size 0x4)
pci 0000:ff:1e.3: BAR 0: trying firmware assignment [io 0x0014-0x0017]
pci 0000:ff:1e.3: BAR 0: [io 0x0014-0x0017] conflicts with PCI Bus 0000:00 [io 0x0000-0x0cf7]
pci_bus 0000:ff: Some PCI device resources are unassigned, try booting with pci=realloc
pci 0000:7f:1e.3: BAR 0: can't assign io (size 0x4)
pci 0000:7f:1e.3: BAR 0: trying firmware assignment [io 0x0014-0x0017]
pci 0000:7f:1e.3: BAR 0: [io 0x0014-0x0017] conflicts with PCI Bus 0000:00 [io 0x0000-0x0cf7]
pci_bus 0000:7f: Some PCI device resources are unassigned, try booting with pci=realloc
pci 0000:00:02.2: BAR 15: assigned [mem 0x380000000000-0x3800004fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: BAR 0: assigned [mem 0x380000000000-0x3800001fffff 64bit pref]
pci 0000:03:00.1: BAR 0: assigned [mem 0x380000200000-0x3800003fffff 64bit pref]
pci 0000:03:00.0: BAR 4: assigned [mem 0x380000400000-0x380000403fff 64bit pref]
pci 0000:03:00.1: BAR 4: assigned [mem 0x380000404000-0x380000407fff 64bit pref]
pci 0000:00:02.2: PCI bridge to [bus 03-04]
pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:02.2: bridge window [mem 0x91900000-0x91cfffff]
pci 0000:00:02.2: bridge window [mem 0x380000000000-0x3800004fffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:06:00.0: BAR 6: assigned [mem 0x91810000-0x9181ffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.0: bridge window [mem 0x91000000-0x918fffff]
pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 5, 229376 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:14.0: xHCI controller failing to respond
DMA-API: preallocated 65536 debug entries
DMA-API: debugging enabled by kernel config
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: DRHD base: 0x000000c7ffc000 flags: 0x1
dmar: IOMMU 1: reg_base_addr c7ffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: RMRR base: 0x00000079410000 end: 0x00000079412fff
DMAR: No ATSR found
IOMMU 1 0xc7ffc000: using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:1d.0 [0x79410000 - 0x79412fff]
IOMMU: Setting identity map for device 0000:00:1a.0 [0x79410000 - 0x79412fff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU12 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU13 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU14 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU15 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU16 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU17 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU18 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU19 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU20 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU21 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU22 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU23 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU24 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU25 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU26 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU27 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU28 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU29 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU30 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU31 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU32 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU33 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU34 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU35 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU36 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU37 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU38 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU39 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU40 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU41 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU42 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU43 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU44 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU45 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU46 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU47 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU48 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU49 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU50 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU51 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU52 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU53 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU54 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU55 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU56 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU57 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU58 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU59 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU60 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU61 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU62 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU63 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU64 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU65 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU66 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU67 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU68 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU69 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU70 sig=0x306f2, pf=0x1, revision=0x1d
microcode: CPU71 sig=0x306f2, pf=0x1, revision=0x1d
microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 65536 (order: 10, 4194304 bytes)
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
msgmni has been set to 1174
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcieport 0000:00:02.2: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
tsc: Refined TSC clocksource calibration: 2294.686 MHz
Switched to clocksource tsc
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
mpt2sas version 16.100.00.00 loaded
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x12 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00180 irq 94
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0x91d00000 port 0x91d00300 irq 94
ata6: DUMMY
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.19.1-k
ixgbe: Copyright (c) 1999-2013 Intel Corporation.
ixgbe 0000:03:00.0: Adapter removed
------------[ cut here ]------------
WARNING: CPU: 23 PID: 1 at /buildarea2/lyang0/intel-x86-32/bitbake_build/tmp/work/intel_x86_32-wrs-linux/linux-windriver/3.14-r0/linux/kernel/workqueue.c:1422 __queue_work+0x27f/0x360()
Modules linked in:
CPU: 23 PID: 1 Comm: swapper/0 Not tainted 3.14.22-rt9-WR7.0.0.0_preempt-rt #1
Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS GRNDSDP1.86B.0030.R03.1405061547 05/06/2014
00000017 00000000 e1fc5c80 c1942eab 00000000 e1fc5cb4 c1048722 c1b7e49c
00000017 00000001 c1b7f6ec 0000058e c1061eaf 0000058e c1061eaf ec96b100
e4406f00 ec827b80 e1fc5cc4 c10487e2 00000009 00000000 e1fc5cfc c1061eaf
Call Trace:
[<c1942eab>] dump_stack+0x4b/0x84
[<c1048722>] warn_slowpath_common+0x82/0xa0
[<c1061eaf>] ? __queue_work+0x27f/0x360
[<c1061eaf>] ? __queue_work+0x27f/0x360
[<c10487e2>] warn_slowpath_null+0x22/0x30
[<c1061eaf>] __queue_work+0x27f/0x360
[<c13bb3f3>] ? debug_smp_processor_id+0x83/0x120
[<c106200a>] queue_work_on+0x7a/0xe0
[<c1610e8f>] ixgbe_service_event_schedule+0x3f/0x50
[<c16112eb>] ixgbe_check_remove.part.81+0x3b/0x50
[<c16113fd>] ixgbe_check_remove+0x7d/0x80
[<c16113bc>] ixgbe_check_remove+0x3c/0x80
[<c103dd6f>] ? ioremap_nocache+0x1f/0x30
[<c161d98a>] ixgbe_probe+0xbfa/0x12c0
[<c10787eb>] ? preempt_count_add+0x4b/0xa0
[<c1520722>] ? __pm_runtime_resume+0x52/0x80
[<c13daea5>] local_pci_probe+0x35/0x80
[<c13da727>] ? pci_match_device+0xc7/0xd0
[<c13dafa0>] pci_device_probe+0xb0/0x100
[<c15156e5>] driver_probe_device+0x75/0x230
[<c194802f>] ? rt_mutex_lock+0x1f/0x70
[<c1515959>] __driver_attach+0x79/0x80
[<c15158e0>] ? __device_attach+0x40/0x40
[<c1513cef>] bus_for_each_dev+0x4f/0x80
[<c151527e>] driver_attach+0x1e/0x20
[<c15158e0>] ? __device_attach+0x40/0x40
[<c1514f37>] bus_add_driver+0x147/0x200
[<c1515f1d>] driver_register+0x5d/0xf0
[<c13da870>] __pci_register_driver+0x60/0x70
[<c1d64161>] ? igb_init_module+0x39/0x39
[<c1d6419e>] ixgbe_init_module+0x3d/0x51
[<c1d64161>] ? igb_init_module+0x39/0x39
[<c1000482>] do_one_initcall+0xd2/0x130
[<c1d2d435>] ? repair_env_string+0x12/0x54
[<c1d2d423>] ? do_early_param+0x73/0x73
[<c1067700>] ? parse_args+0x130/0x3c0
[<c1078cc0>] ? migrate_enable+0xa0/0x1d0
[<c1d2db4e>] kernel_init_freeable+0x17e/0x226
[<c1948b37>] ? _raw_spin_unlock_irq+0x17/0x40
[<c10742c5>] ? finish_task_switch+0x45/0xe0
[<c193d260>] kernel_init+0x10/0xe0
[<c1949d77>] ret_from_kernel_thread+0x1b/0x28
[<c193d250>] ? rest_init+0x80/0x80
---[ end trace 0000000000000001 ]---
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-9: WDC WD1003FZEX-00MK2A0, 01.01A01, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata5.00: ATAPI: DV-W28S-A, 9.2A, max UDMA/100
ata5.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA WDC WD1003FZEX-0 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 4:0:0:0: CD-ROM TEAC DV-W28S-A 9.2A PQ: 0 ANSI: 5
sda: unknown partition table
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 1:0:0:0: [sda] Attached SCSI disk
ixgbe 0000:03:00.0 (unregistered net_device): eeprom read at offset 40 failed
ixgbe 0000:03:00.0 (unregistered net_device): eeprom read at offset 39 failed
ixgbe 0000:03:00.0: HW Init failed: -15
ixgbe: probe of 0000:03:00.0 failed with error -15
ixgbe 0000:03:00.1: Adapter removed
------------[ cut here ]------------
WARNING: CPU: 25 PID: 1 at /buildarea2/lyang0/intel-x86-32/bitbake_build/tmp/work/intel_x86_32-wrs-linux/linux-windriver/3.14-r0/linux/kernel/workqueue.c:1422 __queue_work+0x27f/0x360()
Modules linked in:
CPU: 25 PID: 1 Comm: swapper/0 Tainted: G W 3.14.22-rt9-WR7.0.0.0_preempt-rt #1
Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS GRNDSDP1.86B.0030.R03.1405061547 05/06/2014
00000019 00000000 e1fc5c80 c1942eab 00000000 e1fc5cb4 c1048722 c1b7e49c
00000019 00000001 c1b7f6ec 0000058e c1061eaf 0000058e c1061eaf ec987100
e4406f00 ec827b80 e1fc5cc4 c10487e2 00000009 00000000 e1fc5cfc c1061eaf
Call Trace:
[<c1942eab>] dump_stack+0x4b/0x84
[<c1048722>] warn_slowpath_common+0x82/0xa0
[<c1061eaf>] ? __queue_work+0x27f/0x360
[<c1061eaf>] ? __queue_work+0x27f/0x360
[<c10487e2>] warn_slowpath_null+0x22/0x30
[<c1061eaf>] __queue_work+0x27f/0x360
[<c13bb3f3>] ? debug_smp_processor_id+0x83/0x120
[<c106200a>] queue_work_on+0x7a/0xe0
[<c1610e8f>] ixgbe_service_event_schedule+0x3f/0x50
[<c16112eb>] ixgbe_check_remove.part.81+0x3b/0x50
[<c16113fd>] ixgbe_check_remove+0x7d/0x80
[<c16113bc>] ixgbe_check_remove+0x3c/0x80
[<c103dd6f>] ? ioremap_nocache+0x1f/0x30
[<c161d98a>] ixgbe_probe+0xbfa/0x12c0
[<c10787eb>] ? preempt_count_add+0x4b/0xa0
[<c1520722>] ? __pm_runtime_resume+0x52/0x80
[<c13daea5>] local_pci_probe+0x35/0x80
[<c13da727>] ? pci_match_device+0xc7/0xd0
[<c13dafa0>] pci_device_probe+0xb0/0x100
[<c15156e5>] driver_probe_device+0x75/0x230
[<c194802f>] ? rt_mutex_lock+0x1f/0x70
[<c1515959>] __driver_attach+0x79/0x80
[<c15158e0>] ? __device_attach+0x40/0x40
[<c1513cef>] bus_for_each_dev+0x4f/0x80
[<c151527e>] driver_attach+0x1e/0x20
[<c15158e0>] ? __device_attach+0x40/0x40
[<c1514f37>] bus_add_driver+0x147/0x200
[<c1515f1d>] driver_register+0x5d/0xf0
[<c13da870>] __pci_register_driver+0x60/0x70
[<c1d64161>] ? igb_init_module+0x39/0x39
[<c1d6419e>] ixgbe_init_module+0x3d/0x51
[<c1d64161>] ? igb_init_module+0x39/0x39
[<c1000482>] do_one_initcall+0xd2/0x130
[<c1d2d435>] ? repair_env_string+0x12/0x54
[<c1d2d423>] ? do_early_param+0x73/0x73
[<c1067700>] ? parse_args+0x130/0x3c0
[<c1078cc0>] ? migrate_enable+0xa0/0x1d0
[<c1d2db4e>] kernel_init_freeable+0x17e/0x226
[<c1948b37>] ? _raw_spin_unlock_irq+0x17/0x40
[<c10742c5>] ? finish_task_switch+0x45/0xe0
[<c193d260>] kernel_init+0x10/0xe0
[<c1949d77>] ret_from_kernel_thread+0x1b/0x28
[<c193d250>] ? rest_init+0x80/0x80
---[ end trace 0000000000000002 ]---
ixgbe 0000:03:00.1 (unregistered net_device): eeprom read at offset 40 failed
ixgbe 0000:03:00.1 (unregistered net_device): eeprom read at offset 39 failed
ixgbe 0000:03:00.1: HW Init failed: -15
ixgbe: probe of 0000:03:00.1 failed with error -15
ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
ixgb: Copyright (c) 1999-2008 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 18, io mem 0x91d02000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 18, io mem 0x91d01000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: Host not halted after 16000 microseconds.
xhci_hcd 0000:00:14.0: can't setup: -19
xhci_hcd 0000:00:14.0: USB bus 3 deregistered
xhci_hcd 0000:00:14.0: init 0000:00:14.0 fail, -19
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
i8042: PNP: No PS/2 controller found. Probing ports directly.
usb 1-1: new high-speed USB device number 2 using ehci-pci
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input1
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
u32 classifier
Actions configured
TCP: cubic registered
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
registered taskstats version 1
kmemleak: Kernel memory leak detector initialized
kmemleak: Automatic memory scanning thread started
bio: create slab <bio-1> at 1
Btrfs loaded
console [netcon0] enabled
netconsole: network logging started
rtc_cmos 00:02: setting system clock to 2014-11-05 14:12:15 UTC (1415196735)
ALSA device list:
No soundcards found.
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "nfs" or unknown-block(2,0): error -6
Please append a correct "root=" boot option; here are the available partitions:
0800 976762584 sda driver: sd
0b00 1048575 sr0 driver: sr
VFS: Unable to mount root fs on unknown-block(2,0)
User configuration error - no valid root filesystem found
Kernel panic - not syncing: Invalid configuration from end user prevents continuing
CPU: 4 PID: 1 Comm: swapper/0 Tainted: G W 3.14.22-rt9-WR7.0.0.0_preempt-rt #1
Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS GRNDSDP1.86B.0030.R03.1405061547 05/06/2014
00008000 00000000 e1fc5eb0 c1942eab e1fc5ee4 e1fc5ec8 c19413b5 00000000
e1fc5ee4 00008000 dc089000 e1fc5f10 c1d2de63 c1b6ed50 dc089123 00000000
ed381120 fffffffa 6e6b6e75 2d6e776f 636f6c62 2c32286b 00002930 e1fc5f10
Call Trace:
[<c1942eab>] dump_stack+0x4b/0x84
[<c19413b5>] panic+0x86/0x167
[<c1d2de63>] mount_block_root+0x144/0x1c6
[<c117a69d>] ? SyS_mknod+0x2d/0x30
[<c1d2e075>] mount_root+0xd8/0xe3
[<c1d2e1c5>] prepare_namespace+0x145/0x176
[<c1d2dbe9>] kernel_init_freeable+0x219/0x226
[<c193d260>] kernel_init+0x10/0xe0
[<c1949d77>] ret_from_kernel_thread+0x1b/0x28
[<c193d250>] ? rest_init+0x80/0x80
Kernel Offset: 0x0 from 0xc1000000 (relocation range: 0xc0000000-0xf6bfdfff)
telnet> quit
wrlinux-7/wrlinux/configure --enable-board=intel-x86-32 --enable-kernel=preempt-rt --enable-rootfs=glibc-std-sato --enable-test=yes --enable-parallel-pkgbuilds=35 --enable-jobs=35 --with-layer=wrlinux/wr-testing/bts-dev --with-template=feature/target-toolchain,feature/bts --enable-reconfig=yes
boot on wildcast_pass
