Wind River Support Network

HomeDefectsLIN7-5806
Fixed

LIN7-5806 : CLONE - Bonded interfaces do not communicate correctly with Quanta based servers

Created: Mar 14, 2016    Updated: Sep 8, 2018
Resolved Date: Mar 21, 2016
Found In Version: 7.0
Fix Version: 7.0.0.14
Severity: Severe
Applicable for: Wind River Linux 7
Component/s: Networking

Description

Customer is using bonded interfaces in the Titanium server, that a linked to HW vendor  switches with 10Gb/Sec links. Customer reported a number of issues with those interfaces that he was unable to resolve. The issues included 
0 Mbps reported link speed. Example:
2015-09-23T12:54:56.643 compute-0 kernel: info bonding: bond0: link status definitely down for interface eth0, disabling it
2015-09-23T12:55:01.771 compute-0 kernel: info ixgbe 0000:01:00.0 eth0: NIC Link is Up 10 Gbps, Flow Control: None
2015-09-23T12:55:01.843 compute-0 kernel: info bonding: bond0: link status definitely up for interface eth0, 0 Mbps full duplex.

Also non-activate links on bonded interfaces of the linux side were reported. 

WR attempted to reproduce this problem in our own environment ( In Kista lab), however our own setups behaved correctly.

Customer contacted HW vendor and after investigation they'd concluded that the problem is with LACP protocol on WR host Linux side.

Manual run of "ethtool -r"  according to customer  was able to remedy link problem

Other Downloads


Live chat
Online