All customers except US A&D: to ensure that you can access all of your product downloads, you must log in to the Wind River Delivers portal https://delivers.windriver.com and visit the My Products page to force an initial sync of your product entitlement. Only after you’ve completed this step will you be able to access and download product content through the Artifacts, Registry, and Git interfaces. This also applies to users attempting to run the Wind River installer in maintenance or update mode or Linux installation updates at the command line.

Wind River Support Network

HomeDefectsLIN9-3048
Fixed

LIN9-3048 : Wic image boot without any output with intel-kabylake BSP

Created: Jan 15, 2017    Updated: Dec 3, 2018
Resolved Date: Jan 21, 2017
Found In Version: unknown
Fix Version: 9.0.0.3
Severity: Standard
Applicable for: Wind River Linux 9
Component/s: BSP - Async

Description

Steps to reproduce: 

1) setup with:
setup.sh --machines intel-kabylake-64 --kernel preempt-rt
source ./environment-setup-x86_64-wrlinuxsdk-linux
source ./oe-init-build-env build 

2) build
bitbake wrlinux-image-glibc-small 

3) deploy the wic image into usb
This BSP supports EFI and legacy PCBIOS disk images for USB, HDD and SD card.
The default wic image is an EFI disk image for USB and HDD.
After build the project, user will get a WIC image under the directory
tmp/deploy/images/<bsp name>/ ,such as:

tmp/deploy/images/intel-x86-64/wrlinux-image-glibc-small-intel-x86-64.wic.

Then user can write the output image to an USB or Hard disk:

$ sudo dd if=wrlinux-image-glibc-small-intel-x86-64.wic of=/dev/your_usb_dev

4) start the target with usb disk

The target will boot up without any output.

Steps to Reproduce

/lpg-build/cdc/fast_prod/wrlinux90/WRL90_GIT/wrlinux-9/setup.sh --machines intel-kabylake-64 --kernel preempt-rt
source ./environment-setup-x86_64-wrlinuxsdk-linux
source ./oe-init-build-env build 
bitbake wrlinux-image-glibc-small 
This BSP supports EFI and legacy PCBIOS disk images for USB, HDD and SD card.
The default wic image is an EFI disk image for USB and HDD.
After build the project, user will get a WIC image under the directory
tmp/deploy/images/<bsp name>/ ,such as:

tmp/deploy/images/intel-x86-64/wrlinux-image-glibc-small-intel-x86-64.wic.

Then user can write the output image to an USB or Hard disk:

$ sudo dd if=wrlinux-image-glibc-small-intel-x86-64.wic of=/dev/your_usb_dev

Other Downloads


Live chat
Online