Wind River Support Network

Description

On WRL6 Async BSP fsl_b4xxx, the multilib section of BSP README need updating, please refer to the multilib section in intel-x86 README

Building the intel-x86 layer
----------------------------------
This layer and the wr-kernel layer should be added to bblayers.conf. This
is done automatically when using the Wind River configure wrapper.

Note:
To build a 64-bit kernel + 64-bit rootfs, use:

    --enable-board=intel-x86-64

To build a 32-bit kernel + 32-bit rootfs combination, use
the following configuration:

    --enable-board=intel-x86-32

Multilib is also supported by this BSP.

1. To configure a project with 32-bit multilib support for the entire rootfs, use:

    --enable-multilib=lib32

2. To add 32-bit multilib support for an existing project, use:

    make bbs
    bitbake lib32-wrlinux-image-glibc-std

3. To add 32-bit mulilib support for a specific package, use:

    make bbs
    make lib32-<pkg-name>

Other Downloads

• Wind River Linux 6.0.0.29
• Wind River Linux 6.0.0.30
• Wind River Linux 6.0.0.31
• Wind River Linux 6.0.0.32
• Wind River Linux 6.0.0.33
• Wind River Linux 6.0.0.34
• Wind River Linux 6.0.0.35
• Wind River Linux 6.0.0.36
• Wind River Linux 6.0.0.37
• Wind River Linux 6.0.0.38