Wind River Support Network

Description

Target barcode is 20130

Target ip=128.224.166.251

When system boots up, ssh service is not started. Run "ssh root@${TARGET_IP}" failed:

$ssh root@128.224.166.251
ssh: connect to host 128.224.166.251 port 22: Connection refused

At same while, ping request works:

$ping 128.224.166.251
PING 128.224.166.251 (128.224.166.251) 56(84) bytes of data.
64 bytes from 128.224.166.251: icmp_req=1 ttl=63 time=0.269 ms
64 bytes from 128.224.166.251: icmp_req=2 ttl=63 time=0.271 ms

Steps to Reproduce

1. Get latest git tree on 4/15/2014 
2. Build configure 
/wrlinux-x/wrlinux/configure \ 
  --enable-board=fsl-imx6 \ 
  --enable-kernel=standard \ 
  --enable-rootfs=glibc_std \ 
  --with-layer=wr-driver-support,/wr-testing/kts-test,/wr-testing/bts \ 
  --with-template=feature/kts-basic,feature/kts-extended,feature/kts-standard \ 
  --enable-jobs=10 \ 
  --enable-parallel-pkgbuilds=10 

make fs 

3. Send rootfs, kernel and dtb files to board 

fsl-imx6-glibc-std-standard-dist.tar.bz2 
fsl-imx6-uImage-WR6.0.0.0_standard 
uImage-imx6q-sabreauto.dtb 

Other Downloads

• Wind River Linux 6.0.0.29
• Wind River Linux 6.0.0.30
• Wind River Linux 6.0.0.31
• Wind River Linux 6.0.0.32
• Wind River Linux 6.0.0.33
• Wind River Linux 6.0.0.34
• Wind River Linux 6.0.0.35
• Wind River Linux 6.0.0.36
• Wind River Linux 6.0.0.37
• Wind River Linux 6.0.0.38