Fixed
Created: Nov 12, 2015
Updated: Dec 3, 2018
Resolved Date: Nov 26, 2015
Found In Version: 6.0.0.26
Fix Version: 6.0.0.27
Severity: Standard
Applicable for: Wind River Linux 6
Component/s: Userspace
cannot create more than 1 LVM on emerson matxm target (Q57 BSP running intel-x86_64 BSP :
returns :
Internal error: Duplicate LV id 1z7FlT-rZeG-1z7F-lTrZ-eG1z-7FlT-rZeG1z detected for lv2 in vg00.
#metadata/metadata.c:2277 Internal error: Referenced LV lv1 not listed in VG vg00.
/opt/windriver/WRL_60x_CGP_LATEST/wrlinux-6/wrlinux/configure --enable-board=intel-x86-64 --enable-kernel=preempt-rt --enable-rootfs=glibc-std+installer-support --enable-doc-pages=target --enable-checkout-all-layers=yes --with-sstate-dir=/ASML/sstate_dir_wrl6-0026 --enable-bootimage=ext3 --enable-reconfig --enable-jobs=12 --enable-parallel-pkgbuilds=10 --with-rcpl-version=0026
(note preempt_rt)
make all
boot the target with NFS rootfs
then :
1) please set that fdisk config :
root@localhost:~# fdisk -l /dev/sda
Disk /dev/sda: 160.0 GB, 160041885696 bytes, 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x3114e806
Device Boot Start End Blocks Id System
/dev/sda1 2048 1048576 523264+ 83 Linux
/dev/sda2 1050624 312581807 155765592 8e Linux LVM
2) create the LVM stuff :
root@localhost:~# pvcreate --dataalignment 1024k /dev/sda2
Writing physical volume data to disk "/dev/sda2"
Physical volume "/dev/sda2" successfully created
root@localhost:~# vgcreate vg00 /dev/sda2
Volume group "vg00" successfully created
root@localhost:~# lvcreate -L 1024m -n lv1 /dev/vg00
bio: create slab <bio-2> at 2
Logical volume "lv1" created
root@localhost:~# lvcreate -L 1024m -n lv2 /dev/vg00
Internal error: Duplicate LV id 1z7FlT-rZeG-1z7F-lTrZ-eG1z-7FlT-rZeG1z detected for lv2 in vg00.
Internal error: Referenced LV lv1 not listed in VG vg00.
