Wind River Support Network

Description

This is required for the HP Certification Project and should be treated as a high priority issue.  Also found in 6.0.0.18 but that is not selectable in the dropdown for Found in Versions.

If I create an installer platform and install it on a x86 system that uses UEFI everything works the first time when the disk is partition free.  However, trying to re-install the image by booting the installer image again the installer FS doesn't appear to mount instead the FS on the hard disk mounts.  The only workaround I have is to delete the partitions and then the installer FS is mounted and I can re-install. 

Workaround

Delete the partitions on the harddrive before re-installing, however this prevents the ability to upgrade.

Steps to Reproduce

1) Create an installer platform
2) Install on a UEFI system
3) Reboot and try to re-install on the same system.

Other Downloads

• Wind River Linux 6.0.0.29
• Wind River Linux 6.0.0.30
• Wind River Linux 6.0.0.31
• Wind River Linux 6.0.0.32
• Wind River Linux 6.0.0.33
• Wind River Linux 6.0.0.34
• Wind River Linux 6.0.0.35
• Wind River Linux 6.0.0.36
• Wind River Linux 6.0.0.37
• Wind River Linux 6.0.0.38