The Common Vulnerabilities and Exposures (CVE) project, maintained by the MITRE Corporation, is a list of all standardized names for vulnerabilities and security exposures.
| ID | Description | Priority | Modified date |
|---|---|---|---|
| CVE-2024-21616 | An Improper Validation of Syntactic Correctness of Input vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). On all Junos OS MX Series and SRX Series platforms, when SIP ALG is enabled, and a specific SIP packet is received and processed, NAT IP allocation fails for genuine traffic, which causes Denial of Service (DoS). Continuous receipt of this specific SIP ALG packet will cause a sustained DoS condition. NAT IP usage can be monitored by running the following command. user@srx> show security nat resource-usage source-pool <source_pool_name> Pool name: source_pool_name .. Address Factor-index Port-range Used Avail Total Usage X.X.X.X 0 Single Ports 50258 52342 62464 96% <<<<< - Alg Ports 0 2048 2048 0% This issue affects: Juniper Networks Junos OS on MX Series and SRX Series * All versions earlier than 21.2R3-S6; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S1; * 22.4 versions earlier than 22.4R2-S2, 22.4R3; * 23.2 versions earlier than 23.2R1-S1, 23.2R2. | -- | Jan 12, 2024 |
| CVE-2024-21617 | An Incomplete Cleanup vulnerability in Nonstop active routing (NSR) component of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause memory leak leading to Denial of Service (DoS). On all Junos OS platforms, when NSR is enabled, a BGP flap will cause memory leak. A manual reboot of the system will restore the services. Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. The memory usage can be monitored using the below commands. user@host> show chassis routing-engine no-forwarding user@host> show system memory | no-more This issue affects: Juniper Networks Junos OS * 21.2 versions earlier than 21.2R3-S5; * 21.3 versions earlier than 21.3R3-S4; * 21.4 versions earlier than 21.4R3-S4; * 22.1 versions earlier than 22.1R3-S2; * 22.2 versions earlier than 22.2R3-S2; * 22.3 versions earlier than 22.3R2-S1, 22.3R3; * 22.4 versions earlier than 22.4R1-S2, 22.4R2. This issue does not affect Junos OS versions earlier than 20.4R3-S7. | -- | Jan 12, 2024 |
| CVE-2024-21618 | An Access of Memory Location After End of Buffer vulnerability in the Layer-2 Control Protocols Daemon (l2cpd) of Juniper Networks Junos OS and Junos OS Evolved allows an adjacent, unauthenticated attacker to cause Denial of Service (DoS). On all Junos OS and Junos OS Evolved platforms, when LLDP is enabled on a specific interface, and a malformed LLDP packet is received, l2cpd crashes and restarts. The impact of the l2cpd crash is reinitialization of STP protocols (RSTP, MSTP or VSTP), and MVRP and ERP. Also, if any services depend on LLDP state (like PoE or VoIP device recognition), then these will also be affected. This issue affects: Junos OS: * from 21.4 before 21.4R3-S4, * from 22.1 before 22.1R3-S4, * from 22.2 before 22.2R3-S2, * from 22.3 before 22.3R2-S2, 22.3R3-S1, * from 22.4 before 22.4R3, * from 23.2 before 23.2R2. Junos OS Evolved: * from 21.4-EVO before 21.4R3-S5-EVO, * from 22.1-EVO before 22.1R3-S4-EVO, * from 22.2-EVO before 22.2R3-S2-EVO, * from 22.3-EVO before 22.3R2-S2-EVO, 22.3R3-S1-EVO, * from 22.4-EVO before 22.4R3-EVO, * from 23.2-EVO before 23.2R2-EVO. This issue does not affect: * Junos OS versions prior to 21.4R1; * Junos OS Evolved versions prior to 21.4R1-EVO. | -- | Apr 15, 2024 |
| CVE-2024-21619 | A Missing Authentication for Critical Function vulnerability combined with a Generation of Error Message Containing Sensitive Information vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an unauthenticated, network-based attacker to access sensitive system information. When a user logs in, a temporary file which contains the configuration of the device (as visible to that user) is created in the /cache folder. An unauthenticated attacker can then attempt to access such a file by sending a specific request to the device trying to guess the name of such a file. Successful exploitation will reveal configuration information. This issue affects Juniper Networks Junos OS on SRX Series and EX Series: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S6; * 22.1 versions earlier than 22.1R3-S5; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R1-S2, 23.2R2. | -- | Jan 25, 2024 |
| CVE-2024-21620 | An Improper Neutralization of Input During Web Page Generation (\'Cross-site Scripting\') vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an attacker to construct a URL that when visited by another user enables the attacker to execute commands with the target\'s permissions, including an administrator. A specific invocation of the emit_debug_note method in webauth_operation.php will echo back the data it receives. This issue affects Juniper Networks Junos OS on SRX Series and EX Series: * All versions earlier than 20.4R3-S10; * 21.2 versions earlier than 21.2R3-S8; * 21.4 versions earlier than 21.4R3-S6; * 22.1 versions earlier than 22.1R3-S5; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3-S1; * 23.2 versions earlier than 23.2R2; * 23.4 versions earlier than 23.4R2. | -- | Jan 25, 2024 |
| CVE-2024-21622 | Craft is a content management system. This is a potential moderate impact, low complexity privilege escalation vulnerability in Craft starting in 3.x prior to 3.9.6 and 4.x prior to 4.4.16 with certain user permissions setups. This has been fixed in Craft 4.4.16 and Craft 3.9.6. Users should ensure they are running at least those versions. | -- | Jan 3, 2024 |
| CVE-2024-21623 | OTCLient is an alternative tibia client for otserv. Prior to commit db560de0b56476c87a2f967466407939196dd254, the /mehah/otclient `Analysis - SonarCloud` workflow is vulnerable to an expression injection in Actions, allowing an attacker to run commands remotely on the runner, leak secrets, and alter the repository using this workflow. Commit db560de0b56476c87a2f967466407939196dd254 contains a fix for this issue. | -- | Jan 2, 2024 |
| CVE-2024-21624 | nonebot2 is a cross-platform Python asynchronous chatbot framework written in Python. This security advisory pertains to a potential information leak (e.g., environment variables) in instances where developers utilize `MessageTemplate` and incorporate user-provided data into templates. The identified vulnerability has been remedied in pull request #2509 and will be included in versions released from 2.2.0. Users are strongly advised to upgrade to these patched versions to safeguard against the vulnerability. A temporary workaround involves filtering underscores before incorporating user input into the message template. | -- | Feb 16, 2024 |
| CVE-2024-21625 | SideQuest is a place to get virtual reality applications for Oculus Quest. The SideQuest desktop application uses deep links with a custom protocol (`sidequest://`) to trigger actions in the application from its web contents. Because, prior to version 0.10.35, the deep link URLs were not sanitized properly in all cases, a one-click remote code execution can be achieved in cases when a device is connected, the user is presented with a malicious link and clicks it from within the application. As of version 0.10.35, the custom protocol links within the electron application are now being parsed and sanitized properly. | -- | Jan 4, 2024 |
| CVE-2024-21626 | runc is a CLI tool for spawning and running containers on Linux according to the OCI specification. In runc 1.1.11 and earlier, due to an internal file descriptor leak, an attacker could cause a newly-spawned container process (from runc exec) to have a working directory in the host filesystem namespace, allowing for a container escape by giving access to the host filesystem (attack 2). The same attack could be used by a malicious image to allow a container process to gain access to the host filesystem through runc run (attack 1). Variants of attacks 1 and 2 could be also be used to overwrite semi-arbitrary host binaries, allowing for complete container escapes (attack 3a and attack 3b). runc 1.1.12 includes patches for this issue. | -- | Feb 1, 2024 |
| CVE-2024-21627 | PrestaShop is an open-source e-commerce platform. Prior to versions 8.1.3 and 1.7.8.11, some event attributes are not detected by the `isCleanHTML` method. Some modules using the `isCleanHTML` method could be vulnerable to cross-site scripting. Versions 8.1.3 and 1.7.8.11 contain a patch for this issue. The best workaround is to use the `HTMLPurifier` library to sanitize html input coming from users. The library is already available as a dependency in the PrestaShop project. Beware though that in legacy object models, fields of `HTML` type will call `isCleanHTML`. | -- | Jan 2, 2024 |
| CVE-2024-21628 | PrestaShop is an open-source e-commerce platform. Prior to version 8.1.3, the isCleanHtml method is not used on this this form, which makes it possible to store a cross-site scripting payload in the database. The impact is low because the HTML is not interpreted in BO, thanks to twig\'s escape mechanism. In FO, the cross-site scripting attack is effective, but only impacts the customer sending it, or the customer session from which it was sent. This issue affects those who have a module fetching these messages from the DB and displaying it without escaping HTML. Version 8.1.3 contains a patch for this issue. | -- | Jan 2, 2024 |
| CVE-2024-21629 | Rust EVM is an Ethereum Virtual Machine interpreter. In `rust-evm`, a feature called `record_external_operation` was introduced, allowing library users to record custom gas changes. This feature can have some bogus interactions with the call stack. In particular, during finalization of a `CREATE` or `CREATE2`, in the case that the substack execution happens successfully, `rust-evm` will first commit the substate, and then call `record_external_operation(Write(out_code.len()))`. If `record_external_operation` later fails, this error is returned to the parent call stack, instead of `Succeeded`. Yet, the substate commitment already happened. This causes smart contracts able to commit state changes, when the parent caller contract receives zero address (which usually indicates that the execution has failed). This issue only impacts library users with custom `record_external_operation` that returns errors. The issue is patched in release 0.41.1. No known workarounds are available. | -- | Jan 2, 2024 |
| CVE-2024-21630 | Zulip is an open-source team collaboration tool. A vulnerability in version 8.0 is similar to CVE-2023-32677, but applies to multi-use invitations, not single-use invitation links as in the prior CVE. Specifically, it applies when the installation has configured non-admins to be able to invite users and create multi-use invitations, and has also configured only admins to be able to invite users to streams. As in CVE-2023-32677, this does not let users invite new users to arbitrary streams, only to streams that the inviter can already see. Version 8.1 fixes this issue. As a workaround, administrators can limit sending of invitations down to users who also have the permission to add users to streams. | -- | Jan 25, 2024 |
| CVE-2024-21631 | Vapor is an HTTP web framework for Swift. Prior to version 4.90.0, Vapor\'s `vapor_urlparser_parse` function uses `uint16_t` indexes when parsing a URI\'s components, which may cause integer overflows when parsing untrusted inputs. This vulnerability does not affect Vapor directly but could impact applications relying on the URI type for validating user input. The URI type is used in several places in Vapor. A developer may decide to use URI to represent a URL in their application (especially if that URL is then passed to the HTTP Client) and rely on its public properties and methods. However, URI may fail to properly parse a valid (albeit abnormally long) URL, due to string ranges being converted to 16-bit integers. An attacker may use this behavior to trick the application into accepting a URL to an untrusted destination. By padding the port number with zeros, an attacker can cause an integer overflow to occur when the URL authority is parsed and, as a result, spoof the host. Version 4.90.0 contains a patch for this issue. As a workaround, validate user input before parsing as a URI or, if possible, use Foundation\'s `URL` and `URLComponents` utilities. | -- | Jan 3, 2024 |
| CVE-2024-21632 | omniauth-microsoft_graph provides an Omniauth strategy for the Microsoft Graph API. Prior to versions 2.0.0, the implementation did not validate the legitimacy of the `email` attribute of the user nor did it give/document an option to do so, making it susceptible to nOAuth misconfiguration in cases when the `email` is used as a trusted user identifier. This could lead to account takeover. Version 2.0.0 contains a fix for this issue. | -- | Jan 2, 2024 |
| CVE-2024-21633 | Apktool is a tool for reverse engineering Android APK files. In versions 2.9.1 and prior, Apktool infers resource files\' output path according to their resource names which can be manipulated by attacker to place files at desired location on the system Apktool runs on. Affected environments are those in which an attacker may write/overwrite any file that user has write access, and either user name is known or cwd is under user folder. Commit d348c43b24a9de350ff6e5bd610545a10c1fc712 contains a patch for this issue. | -- | Jan 3, 2024 |
| CVE-2024-21634 | Amazon Ion is a Java implementation of the Ion data notation. Prior to version 1.10.5, a potential denial-of-service issue exists in `ion-java` for applications that use `ion-java` to deserialize Ion text encoded data, or deserialize Ion text or binary encoded data into the `IonValue` model and then invoke certain `IonValue` methods on that in-memory representation. An actor could craft Ion data that, when loaded by the affected application and/or processed using the `IonValue` model, results in a `StackOverflowError` originating from the `ion-java` library. The patch is included in `ion-java` 1.10.5. As a workaround, do not load data which originated from an untrusted source or that could have been tampered with. | -- | Jan 4, 2024 |
| CVE-2024-21636 | view_component is a framework for building reusable, testable, and encapsulated view components in Ruby on Rails. Versions prior to 3.9.0 and 2.83.0 have a cross-site scripting vulnerability that has the potential to impact anyone rendering a component directly from a controller with the view_component gem. Note that only components that define a `#call` method (i.e. instead of using a sidecar template) are affected. The return value of the `#call` method is not sanitized and can include user-defined content. In addition, the return value of the `#output_postamble` methodis not sanitized, which can also lead to cross-site scripting issues. Versions 3.9.0 and 2.83.0 have been released and fully mitigate both the `#call` and the `#output_postamble` vulnerabilities. As a workaround, sanitize the return value of `#call`. | -- | Jan 4, 2024 |
| CVE-2024-21637 | Authentik is an open-source Identity Provider. Authentik is a vulnerable to a reflected Cross-Site Scripting vulnerability via JavaScript-URIs in OpenID Connect flows with `response_mode=form_post`. This relatively user could use the described attacks to perform a privilege escalation. This vulnerability has been patched in versions 2023.10.6 and 2023.8.6. | -- | Jan 11, 2024 |
| CVE-2024-21638 | Azure IPAM (IP Address Management) is a lightweight solution developed on top of the Azure platform designed to help Azure customers manage their IP Address space easily and effectively. By design there is no write access to customers\' Azure environments as the Service Principal used is only assigned the Reader role at the root Management Group level. Until recently, the solution lacked the validation of the passed in authentication token which may result in attacker impersonating any privileged user to access data stored within the IPAM instance and subsequently from Azure, causing an elevation of privilege. This vulnerability has been patched in version 3.0.0. | -- | Jan 11, 2024 |
| CVE-2024-21639 | CEF (Chromium Embedded Framework ) is a simple framework for embedding Chromium-based browsers in other applications. `CefLayeredWindowUpdaterOSR::OnAllocatedSharedMemory` does not check the size of the shared memory, which leads to out-of-bounds read outside the sandbox. This vulnerability was patched in commit 1f55d2e. | -- | Jan 14, 2024 |
| CVE-2024-21640 | Chromium Embedded Framework (CEF) is a simple framework for embedding Chromium-based browsers in other applications.`CefVideoConsumerOSR::OnFrameCaptured` does not check `pixel_format` properly, which leads to out-of-bounds read out of the sandbox. This vulnerability was patched in commit 1f55d2e. | -- | Jan 14, 2024 |
| CVE-2024-21641 | Flarum is open source discussion platform software. Prior to version 1.8.5, the Flarum `/logout` route includes a redirect parameter that allows any third party to redirect users from a (trusted) domain of the Flarum installation to redirect to any link. For logged-in users, the logout must be confirmed. Guests are immediately redirected. This could be used by spammers to redirect to a web address using a trusted domain of a running Flarum installation. The vulnerability has been fixed and published as flarum/core v1.8.5. As a workaround, some extensions modifying the logout route can remedy this issue if their implementation is safe. | -- | Jan 5, 2024 |
| CVE-2024-21642 | D-Tale is a visualizer for Pandas data structures. Users hosting versions D-Tale prior to 3.9.0 publicly can be vulnerable to server-side request forgery (SSRF), allowing attackers to access files on the server. Users should upgrade to version 3.9.0, where the `Load From the Web` input is turned off by default. The only workaround for versions earlier than 3.9.0 is to only host D-Tale to trusted users. | -- | Jan 8, 2024 |
| CVE-2024-21643 | IdentityModel Extensions for .NET provide assemblies for web developers that wish to use federated identity providers for establishing the caller\'s identity. Anyone leveraging the `SignedHttpRequest`protocol or the `SignedHttpRequestValidator`is vulnerable. Microsoft.IdentityModel trusts the `jku`claim by default for the `SignedHttpRequest`protocol. This raises the possibility to make any remote or local `HTTP GET` request. The vulnerability has been fixed in Microsoft.IdentityModel.Protocols.SignedHttpRequest. Users should update all their Microsoft.IdentityModel versions to 7.1.2 (for 7x) or higher, 6.34.0 (for 6x) or higher. | -- | Jan 10, 2024 |
| CVE-2024-21644 | pyLoad is the free and open-source Download Manager written in pure Python. Any unauthenticated user can browse to a specific URL to expose the Flask config, including the `SECRET_KEY` variable. This issue has been patched in version 0.5.0b3.dev77. | -- | Jan 8, 2024 |
| CVE-2024-21645 | pyLoad is the free and open-source Download Manager written in pure Python. A log injection vulnerability was identified in `pyload` allowing any unauthenticated actor to inject arbitrary messages into the logs gathered by `pyload`. Forged or otherwise, corrupted log files can be used to cover an attacker’s tracks or even to implicate another party in the commission of a malicious act. This vulnerability has been patched in version 0.5.0b3.dev77. | -- | Jan 8, 2024 |
| CVE-2024-21646 | Azure uAMQP is a general purpose C library for AMQP 1.0. The UAMQP library is used by several clients to implement AMQP protocol communication. When clients using this library receive a crafted binary type data, an integer overflow or wraparound or memory safety issue can occur and may cause remote code execution. This vulnerability has been patched in release 2024-01-01. | -- | Jan 9, 2024 |
| CVE-2024-21647 | Puma is a web server for Ruby/Rack applications built for parallelism. Prior to version 6.4.2, puma exhibited incorrect behavior when parsing chunked transfer encoding bodies in a way that allowed HTTP request smuggling. Fixed versions limits the size of chunk extensions. Without this limit, an attacker could cause unbounded resource (CPU, network bandwidth) consumption. This vulnerability has been fixed in versions 6.4.2 and 5.6.8. | -- | Jan 8, 2024 |
| CVE-2024-21648 | XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. The rollback action is missing a right protection, a user can rollback to a previous version of the page to gain rights they don\'t have anymore. The problem has been patched in XWiki 14.10.17, 15.5.3 and 15.8-rc-1 by ensuring that the rights are checked before performing the rollback. | -- | Jan 9, 2024 |
| CVE-2024-21649 | The vantage6 technology enables to manage and deploy privacy enhancing technologies like Federated Learning (FL) and Multi-Party Computation (MPC). Prior to 4.2.0, authenticated users could inject code into algorithm environment variables, resulting in remote code execution. This vulnerability is patched in 4.2.0. | -- | Jan 30, 2024 |
| CVE-2024-21650 | XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. XWiki is vulnerable to a remote code execution (RCE) attack through its user registration feature. This issue allows an attacker to execute arbitrary code by crafting malicious payloads in the first name or last name fields during user registration. This impacts all installations that have user registration enabled for guests. This vulnerability has been patched in XWiki 14.10.17, 15.5.3 and 15.8 RC1. | -- | Jan 8, 2024 |
| CVE-2024-21651 | XWiki Platform is a generic wiki platform offering runtime services for applications built on top of it. A user able to attach a file to a page can post a malformed TAR file by manipulating file modification times headers, which when parsed by Tika, could cause a denial of service issue via CPU consumption. This vulnerability has been patched in XWiki 14.10.18, 15.5.3 and 15.8 RC1. | -- | Jan 9, 2024 |
| CVE-2024-21652 | Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Prior to versions 2.8.13, 2.9.9, and 2.10.4, an attacker can exploit a chain of vulnerabilities, including a Denial of Service (DoS) flaw and in-memory data storage weakness, to effectively bypass the application\'s brute force login protection. This is a critical security vulnerability that allows attackers to bypass the brute force login protection mechanism. Not only can they crash the service affecting all users, but they can also make unlimited login attempts, increasing the risk of account compromise. Versions 2.8.13, 2.9.9, and 2.10.4 contain a patch for this issue. | -- | Mar 18, 2024 |
| CVE-2024-21653 | The vantage6 technology enables to manage and deploy privacy enhancing technologies like Federated Learning (FL) and Multi-Party Computation (MPC). Nodes and servers get a ssh config by default that permits root login with password authentication. In a proper deployment, the SSH service is not exposed so there is no risk, but not all deployments are ideal. The default should therefore be less permissive. The vulnerability can be mitigated by removing the ssh part from the docker file and rebuilding the docker image. Version 4.2.0 patches the vulnerability. | -- | Jan 30, 2024 |
| CVE-2024-21654 | Rubygems.org is the Ruby community\'s gem hosting service. Rubygems.org users with MFA enabled would normally be protected from account takeover in the case of email account takeover. However, a workaround on the forgotten password form allows an attacker to bypass the MFA requirement and takeover the account. This vulnerability has been patched in commit 0b3272a. | -- | Jan 14, 2024 |
| CVE-2024-21655 | Discourse is a platform for community discussion. For fields that are client editable, limits on sizes are not imposed. This allows a malicious actor to cause a Discourse instance to use excessive disk space and also often excessive bandwidth. The issue is patched 3.1.4 and 3.2.0.beta4. | -- | Jan 14, 2024 |
| CVE-2024-21661 | Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Prior to versions 2.8.13, 2.9.9, and 2.10.4, an attacker can exploit a critical flaw in the application to initiate a Denial of Service (DoS) attack, rendering the application inoperable and affecting all users. The issue arises from unsafe manipulation of an array in a multi-threaded environment. The vulnerability is rooted in the application\'s code, where an array is being modified while it is being iterated over. This is a classic programming error but becomes critically unsafe when executed in a multi-threaded environment. When two threads interact with the same array simultaneously, the application crashes. This is a Denial of Service (DoS) vulnerability. Any attacker can crash the application continuously, making it impossible for legitimate users to access the service. The issue is exacerbated because it does not require authentication, widening the pool of potential attackers. Versions 2.8.13, 2.9.9, and 2.10.4 contain a patch for this issue. | -- | Mar 18, 2024 |
| CVE-2024-21662 | Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Prior to versions 2.8.13, 2.9.9, and 2.10.4, an attacker can effectively bypass the rate limit and brute force protections by exploiting the application\'s weak cache-based mechanism. This loophole in security can be combined with other vulnerabilities to attack the default admin account. This flaw undermines a patch for CVE-2020-8827 intended to protect against brute-force attacks. The application\'s brute force protection relies on a cache mechanism that tracks login attempts for each user. This cache is limited to a `defaultMaxCacheSize` of 1000 entries. An attacker can overflow this cache by bombarding it with login attempts for different users, thereby pushing out the admin account\'s failed attempts and effectively resetting the rate limit for that account. This is a severe vulnerability that enables attackers to perform brute force attacks at an accelerated rate, especially targeting the default admin account. Users should upgrade to version 2.8.13, 2.9.9, or 2.10.4 to receive a patch. | -- | Mar 18, 2024 |
| CVE-2024-21663 | Discord-Recon is a Discord bot created to automate bug bounty recon, automated scans and information gathering via a discord server. Discord-Recon is vulnerable to remote code execution. An attacker is able to execute shell commands in the server without having an admin role. This vulnerability has been fixed in version 0.0.8. | -- | Jan 9, 2024 |
| CVE-2024-21664 | jwx is a Go module implementing various JWx (JWA/JWE/JWK/JWS/JWT, otherwise known as JOSE) technologies. Calling `jws.Parse` with a JSON serialized payload where the `signature` field is present while `protected` is absent can lead to a nil pointer dereference. The vulnerability can be used to crash/DOS a system doing JWS verification. This vulnerability has been patched in versions 2.0.19 and 1.2.28. | -- | Jan 10, 2024 |
| CVE-2024-21665 | ecommerce-framework-bundle is the Pimcore Ecommerce Framework Bundle. An authenticated and unauthorized user can access the back-office orders list and be able to query over the information returned. Access control and permissions are not being enforced. This vulnerability has been patched in version 1.0.10. | -- | Jan 11, 2024 |
| CVE-2024-21666 | The Customer Management Framework (CMF) for Pimcore adds functionality for customer data management, segmentation, personalization and marketing automation. An authenticated and unauthorized user can access the list of potential duplicate users and see their data. Permissions are enforced when reaching the `/admin/customermanagementframework/duplicates/list` endpoint allowing an authenticated user without the permissions to access the endpoint and query the data available there. Unauthorized user(s) can access PII data from customers. This vulnerability has been patched in version 4.0.6. | -- | Jan 11, 2024 |
| CVE-2024-21667 | pimcore/customer-data-framework is the Customer Management Framework for management of customer data within Pimcore. An authenticated and unauthorized user can access the GDPR data extraction feature and query over the information returned, leading to customer data exposure. Permissions are not enforced when reaching the `/admin/customermanagementframework/gdpr-data/search-data-objects` endpoint allowing an authenticated user without the permissions to access the endpoint and query the data available there. An unauthorized user can access PII data from customers. This vulnerability has been patched in version 4.0.6. | -- | Jan 11, 2024 |
| CVE-2024-21668 | react-native-mmkv is a library that allows easy use of MMKV inside React Native applications. Before version 2.11.0, the react-native-mmkv logged the optional encryption key for the MMKV database into the Android system log. The key can be obtained by anyone with access to the Android Debugging Bridge (ADB) if it is enabled in the phone settings. This bug is not present on iOS devices. By logging the encryption secret to the system logs, attackers can trivially recover the secret by enabling ADB and undermining an app\'s thread model. This issue has been patched in version 2.11.0. | -- | Jan 9, 2024 |
| CVE-2024-21669 | Hyperledger Aries Cloud Agent Python (ACA-Py) is a foundation for building decentralized identity applications and services running in non-mobile environments. When verifying W3C Format Verifiable Credentials using JSON-LD with Linked Data Proofs (LDP-VCs), the result of verifying the presentation `document.proof` was not factored into the final `verified` value (`true`/`false`) on the presentation record. The flaw enables holders of W3C Format Verifiable Credentials using JSON-LD with Linked Data Proofs (LDPs) to present incorrectly constructed proofs, and allows malicious verifiers to save and replay a presentation from such holders as their own. This vulnerability has been present since version 0.7.0 and fixed in version 0.10.5. | -- | Jan 11, 2024 |
| CVE-2024-21670 | Ursa is a cryptographic library for use with blockchains. The revocation schema that is part of the Ursa CL-Signatures implementations has a flaw that could impact the privacy guarantees defined by the AnonCreds verifiable credential model, allowing a malicious holder of a revoked credential to generate a valid Non-Revocation Proof for that credential as part of an AnonCreds presentation. A verifier may verify a credential from a holder as being not revoked when in fact, the holder\'s credential has been revoked. Ursa has moved to end-of-life status and no fix is expected. | -- | Jan 16, 2024 |
| CVE-2024-21671 | The vantage6 technology enables to manage and deploy privacy enhancing technologies like Federated Learning (FL) and Multi-Party Computation (MPC). It is possible to find out usernames from the response time of login requests. This could aid attackers in credential attacks. Version 4.2.0 patches this vulnerability. | -- | Jan 30, 2024 |
| CVE-2024-21672 | This High severity Remote Code Execution (RCE) vulnerability was introduced in version 2.1.0 of Confluence Data Center and Server. Remote Code Execution (RCE) vulnerability, with a CVSS Score of 8.3 and a CVSS Vector of CVSS:3.0/AV:N/AC:H/PR:N/UI:R/S:C/C:H/I:H/A:H allows an unauthenticated attacker to remotely expose assets in your environment susceptible to exploitation which has high impact to confidentiality, high impact to integrity, high impact to availability, and requires user interaction. Atlassian recommends that Confluence Data Center and Server customers upgrade to latest version, if you are unable to do so, upgrade your instance to one of the specified supported fixed versions: * Confluence Data Center and Server 7.19: Upgrade to a release 7.19.18, or any higher 7.19.x release * Confluence Data Center and Server 8.5: Upgrade to a release 8.5.5 or any higher 8.5.x release * Confluence Data Center and Server 8.7: Upgrade to a release 8.7.2 or any higher release See the release notes (https://confluence.atlassian.com/doc/confluence-release-notes-327.html ). You can download the latest version of Confluence Data Center and Server from the download center (https://www.atlassian.com/software/confluence/download-archives). | -- | Jan 16, 2024 |
