The Common Vulnerabilities and Exposures (CVE) project, maintained by the MITRE Corporation, is a list of all standardized names for vulnerabilities and security exposures.
| ID | Description | Priority | Modified date | Fixed Release |
|---|---|---|---|---|
| CVE-2024-27061 | In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ce - Fix use after free in unprepare sun8i_ce_cipher_unprepare should be called before crypto_finalize_skcipher_request, because client callbacks may immediately free memory, that isn\'t needed anymore. But it will be used by unprepare after free. Before removing prepare/unprepare callbacks it was handled by crypto engine in crypto_finalize_request. Usually that results in a pointer dereference problem during a in crypto selftest. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000004716d000 [0000000000000030] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP This problem is detected by KASAN as well. ================================================================== BUG: KASAN: slab-use-after-free in sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce] Read of size 8 at addr ffff00000dcdc040 by task 1c15000.crypto-/373 Hardware name: Pine64 PinePhone (1.2) (DT) Call trace: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5d8 kasan_report+0x90/0xd0 __asan_load8+0x9c/0xc0 sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce] crypto_pump_work+0x354/0x620 [crypto_engine] kthread_worker_fn+0x244/0x498 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Allocated by task 379: kasan_save_stack+0x3c/0x68 kasan_set_track+0x2c/0x40 kasan_save_alloc_info+0x24/0x38 __kasan_kmalloc+0xd4/0xd8 __kmalloc+0x74/0x1d0 alg_test_skcipher+0x90/0x1f0 alg_test+0x24c/0x830 cryptomgr_test+0x38/0x60 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Freed by task 379: kasan_save_stack+0x3c/0x68 kasan_set_track+0x2c/0x40 kasan_save_free_info+0x38/0x60 __kasan_slab_free+0x100/0x170 slab_free_freelist_hook+0xd4/0x1e8 __kmem_cache_free+0x15c/0x290 kfree+0x74/0x100 kfree_sensitive+0x80/0xb0 alg_test_skcipher+0x12c/0x1f0 alg_test+0x24c/0x830 cryptomgr_test+0x38/0x60 kthread+0x168/0x178 ret_from_fork+0x10/0x20 The buggy address belongs to the object at ffff00000dcdc000 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 64 bytes inside of freed 256-byte region [ffff00000dcdc000, ffff00000dcdc100) | -- | May 1, 2024 | n/a |
| CVE-2024-27062 | In the Linux kernel, the following vulnerability has been resolved: nouveau: lock the client object tree. It appears the client object tree has no locking unless I\'ve missed something else. Fix races around adding/removing client objects, mostly vram bar mappings. 4562.099306] general protection fault, probably for non-canonical address 0x6677ed422bceb80c: 0000 [#1] PREEMPT SMP PTI [ 4562.099314] CPU: 2 PID: 23171 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 [ 4562.099324] Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 [ 4562.099330] RIP: 0010:nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099503] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 48 89 f8 48 85 f6 74 39 48 8b 87 a0 00 00 00 48 85 c0 74 12 <48> 8b 48 f8 48 39 ce 73 15 48 8b 40 10 48 85 c0 75 ee 48 c7 c0 fe [ 4562.099506] RSP: 0000:ffffa94cc420bbf8 EFLAGS: 00010206 [ 4562.099512] RAX: 6677ed422bceb814 RBX: ffff98108791f400 RCX: ffff9810f26b8f58 [ 4562.099517] RDX: 0000000000000000 RSI: ffff9810f26b9158 RDI: ffff98108791f400 [ 4562.099519] RBP: ffff9810f26b9158 R08: 0000000000000000 R09: 0000000000000000 [ 4562.099521] R10: ffffa94cc420bc48 R11: 0000000000000001 R12: ffff9810f02a7cc0 [ 4562.099526] R13: 0000000000000000 R14: 00000000000000ff R15: 0000000000000007 [ 4562.099528] FS: 00007f629c5017c0(0000) GS:ffff98142c700000(0000) knlGS:0000000000000000 [ 4562.099534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4562.099536] CR2: 00007f629a882000 CR3: 000000017019e004 CR4: 00000000003706f0 [ 4562.099541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4562.099542] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4562.099544] Call Trace: [ 4562.099555] <TASK> [ 4562.099573] ? die_addr+0x36/0x90 [ 4562.099583] ? exc_general_protection+0x246/0x4a0 [ 4562.099593] ? asm_exc_general_protection+0x26/0x30 [ 4562.099600] ? nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099730] nvkm_ioctl+0xa1/0x250 [nouveau] [ 4562.099861] nvif_object_map_handle+0xc8/0x180 [nouveau] [ 4562.099986] nouveau_ttm_io_mem_reserve+0x122/0x270 [nouveau] [ 4562.100156] ? dma_resv_test_signaled+0x26/0xb0 [ 4562.100163] ttm_bo_vm_fault_reserved+0x97/0x3c0 [ttm] [ 4562.100182] ? __mutex_unlock_slowpath+0x2a/0x270 [ 4562.100189] nouveau_ttm_fault+0x69/0xb0 [nouveau] [ 4562.100356] __do_fault+0x32/0x150 [ 4562.100362] do_fault+0x7c/0x560 [ 4562.100369] __handle_mm_fault+0x800/0xc10 [ 4562.100382] handle_mm_fault+0x17c/0x3e0 [ 4562.100388] do_user_addr_fault+0x208/0x860 [ 4562.100395] exc_page_fault+0x7f/0x200 [ 4562.100402] asm_exc_page_fault+0x26/0x30 [ 4562.100412] RIP: 0033:0x9b9870 [ 4562.100419] Code: 85 a8 f7 ff ff 8b 8d 80 f7 ff ff 89 08 e9 18 f2 ff ff 0f 1f 84 00 00 00 00 00 44 89 32 e9 90 fa ff ff 0f 1f 84 00 00 00 00 00 <44> 89 32 e9 f8 f1 ff ff 0f 1f 84 00 00 00 00 00 66 44 89 32 e9 e7 [ 4562.100422] RSP: 002b:00007fff9ba2dc70 EFLAGS: 00010246 [ 4562.100426] RAX: 0000000000000004 RBX: 000000000dd65e10 RCX: 000000fff0000000 [ 4562.100428] RDX: 00007f629a882000 RSI: 00007f629a882000 RDI: 0000000000000066 [ 4562.100432] RBP: 00007fff9ba2e570 R08: 0000000000000000 R09: 0000000123ddf000 [ 4562.100434] R10: 0000000000000001 R11: 0000000000000246 R12: 000000007fffffff [ 4562.100436] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 4562.100446] </TASK> [ 4562.100448] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink cmac bnep sunrpc iwlmvm intel_rapl_msr intel_rapl_common snd_sof_pci_intel_cnl x86_pkg_temp_thermal intel_powerclamp snd_sof_intel_hda_common mac80211 coretemp snd_soc_acpi_intel_match kvm_intel snd_soc_acpi snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda_mlink ---truncated--- | -- | May 1, 2024 | n/a |
| CVE-2024-27063 | In the Linux kernel, the following vulnerability has been resolved: leds: trigger: netdev: Fix kernel panic on interface rename trig notify Commit d5e01266e7f5 (leds: trigger: netdev: add additional specific link speed mode) in the various changes, reworked the way to set the LINKUP mode in commit cee4bd16c319 (leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename) and moved it to a generic function. This changed the logic where, in the previous implementation the dev from the trigger event was used to check if the carrier was ok, but in the new implementation with the generic function, the dev in trigger_data is used instead. This is problematic and cause a possible kernel panic due to the fact that the dev in the trigger_data still reference the old one as the new one (passed from the trigger event) still has to be hold and saved in the trigger_data struct (done in the NETDEV_REGISTER case). On calling of get_device_state(), an invalid net_dev is used and this cause a kernel panic. To handle this correctly, move the call to get_device_state() after the new net_dev is correctly set in trigger_data (in the NETDEV_REGISTER case) and correctly parse the new dev. | -- | May 1, 2024 | n/a |
| CVE-2024-27064 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix a memory leak in nf_tables_updchain If nft_netdev_register_hooks() fails, the memory associated with nft_stats is not freed, causing a memory leak. This patch fixes it by moving nft_stats_alloc() down after nft_netdev_register_hooks() succeeds. | -- | May 1, 2024 | n/a |
| CVE-2024-27065 | In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: do not compare internal table flags on updates Restore skipping transaction if table update does not modify flags. | -- | May 1, 2024 | n/a |
| CVE-2024-27066 | In the Linux kernel, the following vulnerability has been resolved: virtio: packed: fix unmap leak for indirect desc table When use_dma_api and premapped are true, then the do_unmap is false. Because the do_unmap is false, vring_unmap_extra_packed is not called by detach_buf_packed. if (unlikely(vq->do_unmap)) { curr = id; for (i = 0; i < state->num; i++) { vring_unmap_extra_packed(vq, &vq->packed.desc_extra[curr]); curr = vq->packed.desc_extra[curr].next; } } So the indirect desc table is not unmapped. This causes the unmap leak. So here, we check vq->use_dma_api instead. Synchronously, dma info is updated based on use_dma_api judgment This bug does not occur, because no driver use the premapped with indirect. | -- | May 1, 2024 | n/a |
| CVE-2024-27067 | In the Linux kernel, the following vulnerability has been resolved: xen/evtchn: avoid WARN() when unbinding an event channel When unbinding a user event channel, the related handler might be called a last time in case the kernel was built with CONFIG_DEBUG_SHIRQ. This might cause a WARN() in the handler. Avoid that by adding an unbinding flag to struct user_event which will short circuit the handler. | -- | May 1, 2024 | n/a |
| CVE-2024-27068 | In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path If devm_krealloc() fails, then \'efuse\' is leaking. So free it to avoid a leak. | -- | May 1, 2024 | n/a |
| CVE-2024-27069 | In the Linux kernel, the following vulnerability has been resolved: ovl: relax WARN_ON in ovl_verify_area() syzbot hit an assertion in copy up data loop which looks like it is the result of a lower file whose size is being changed underneath overlayfs. This type of use case is documented to cause undefined behavior, so returning EIO error for the copy up makes sense, but it should not be causing a WARN_ON assertion. | -- | May 1, 2024 | n/a |
| CVE-2024-27070 | In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use-after-free issue in f2fs_filemap_fault syzbot reports a f2fs bug as below: BUG: KASAN: slab-use-after-free in f2fs_filemap_fault+0xd1/0x2c0 fs/f2fs/file.c:49 Read of size 8 at addr ffff88807bb22680 by task syz-executor184/5058 CPU: 0 PID: 5058 Comm: syz-executor184 Not tainted 6.7.0-syzkaller-09928-g052d534373b7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x163/0x540 mm/kasan/report.c:488 kasan_report+0x142/0x170 mm/kasan/report.c:601 f2fs_filemap_fault+0xd1/0x2c0 fs/f2fs/file.c:49 __do_fault+0x131/0x450 mm/memory.c:4376 do_shared_fault mm/memory.c:4798 [inline] do_fault mm/memory.c:4872 [inline] do_pte_missing mm/memory.c:3745 [inline] handle_pte_fault mm/memory.c:5144 [inline] __handle_mm_fault+0x23b7/0x72b0 mm/memory.c:5285 handle_mm_fault+0x27e/0x770 mm/memory.c:5450 do_user_addr_fault arch/x86/mm/fault.c:1364 [inline] handle_page_fault arch/x86/mm/fault.c:1507 [inline] exc_page_fault+0x456/0x870 arch/x86/mm/fault.c:1563 asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:570 The root cause is: in f2fs_filemap_fault(), vmf->vma may be not alive after filemap_fault(), so it may cause use-after-free issue when accessing vmf->vma->vm_flags in trace_f2fs_filemap_fault(). So it needs to keep vm_flags in separated temporary variable for tracepoint use. | -- | May 1, 2024 | n/a |
| CVE-2024-27071 | In the Linux kernel, the following vulnerability has been resolved: backlight: hx8357: Fix potential NULL pointer dereference The im pins are optional. Add missing check in the hx8357_probe(). | -- | May 1, 2024 | n/a |
| CVE-2024-27072 | In the Linux kernel, the following vulnerability has been resolved: media: usbtv: Remove useless locks in usbtv_video_free() Remove locks calls in usbtv_video_free() because are useless and may led to a deadlock as reported here: https://syzkaller.appspot.com/x/bisect.txt?x=166dc872180000 Also remove usbtv_stop() call since it will be called when unregistering the device. Before \'c838530d230b\' this issue would only be noticed if you disconnect while streaming and now it is noticeable even when disconnecting while not streaming. [hverkuil: fix minor spelling mistake in log message] | -- | May 1, 2024 | n/a |
| CVE-2024-27073 | In the Linux kernel, the following vulnerability has been resolved: media: ttpci: fix two memleaks in budget_av_attach When saa7146_register_device and saa7146_vv_init fails, budget_av_attach should free the resources it allocates, like the error-handling of ttpci_budget_init does. Besides, there are two fixme comment refers to such deallocations. | -- | May 1, 2024 | n/a |
| CVE-2024-27074 | In the Linux kernel, the following vulnerability has been resolved: media: go7007: fix a memleak in go7007_load_encoder In go7007_load_encoder, bounce(i.e. go->boot_fw), is allocated without a deallocation thereafter. After the following call chain: saa7134_go7007_init |-> go7007_boot_encoder |-> go7007_load_encoder |-> kfree(go) go is freed and thus bounce is leaked. | -- | May 1, 2024 | n/a |
| CVE-2024-27075 | In the Linux kernel, the following vulnerability has been resolved: media: dvb-frontends: avoid stack overflow warnings with clang A previous patch worked around a KASAN issue in stv0367, now a similar problem showed up with clang: drivers/media/dvb-frontends/stv0367.c:1222:12: error: stack frame size (3624) exceeds limit (2048) in \'stv0367ter_set_frontend\' [-Werror,-Wframe-larger-than] 1214 | static int stv0367ter_set_frontend(struct dvb_frontend *fe) Rework the stv0367_writereg() function to be simpler and mark both register access functions as noinline_for_stack so the temporary i2c_msg structures do not get duplicated on the stack when KASAN_STACK is enabled. | -- | May 1, 2024 | n/a |
| CVE-2024-27076 | In the Linux kernel, the following vulnerability has been resolved: media: imx: csc/scaler: fix v4l2_ctrl_handler memory leak Free the memory allocated in v4l2_ctrl_handler_init on release. | -- | May 1, 2024 | n/a |
| CVE-2024-27077 | In the Linux kernel, the following vulnerability has been resolved: media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity but isn\'t freed in its following error-handling paths. This patch adds such deallocation to prevent memleak of entity->name. | -- | May 1, 2024 | n/a |
| CVE-2024-27078 | In the Linux kernel, the following vulnerability has been resolved: media: v4l2-tpg: fix some memleaks in tpg_alloc In tpg_alloc, resources should be deallocated in each and every error-handling paths, since they are allocated in for statements. Otherwise there would be memleaks because tpg_free is called only when tpg_alloc return 0. | -- | May 1, 2024 | n/a |
| CVE-2024-27079 | In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix NULL domain on device release In the kdump kernel, the IOMMU operates in deferred_attach mode. In this mode, info->domain may not yet be assigned by the time the release_device function is called. It leads to the following crash in the crash kernel: BUG: kernel NULL pointer dereference, address: 000000000000003c ... RIP: 0010:do_raw_spin_lock+0xa/0xa0 ... _raw_spin_lock_irqsave+0x1b/0x30 intel_iommu_release_device+0x96/0x170 iommu_deinit_device+0x39/0xf0 __iommu_group_remove_device+0xa0/0xd0 iommu_bus_notifier+0x55/0xb0 notifier_call_chain+0x5a/0xd0 blocking_notifier_call_chain+0x41/0x60 bus_notify+0x34/0x50 device_del+0x269/0x3d0 pci_remove_bus_device+0x77/0x100 p2sb_bar+0xae/0x1d0 ... i801_probe+0x423/0x740 Use the release_domain mechanism to fix it. The scalable mode context entry which is not part of release domain should be cleared in release_device(). | -- | May 1, 2024 | n/a |
| CVE-2024-27080 | In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race when detecting delalloc ranges during fiemap For fiemap we recently stopped locking the target extent range for the whole duration of the fiemap call, in order to avoid a deadlock in a scenario where the fiemap buffer happens to be a memory mapped range of the same file. This use case is very unlikely to be useful in practice but it may be triggered by fuzz testing (syzbot, etc). This however introduced a race that makes us miss delalloc ranges for file regions that are currently holes, so the caller of fiemap will not be aware that there\'s data for some file regions. This can be quite serious for some use cases - for example in coreutils versions before 9.0, the cp program used fiemap to detect holes and data in the source file, copying only regions with data (extents or delalloc) from the source file to the destination file in order to preserve holes (see the documentation for its --sparse command line option). This means that if cp was used with a source file that had delalloc in a hole, the destination file could end up without that data, which is effectively a data loss issue, if it happened to hit the race described below. The race happens like this: 1) Fiemap is called, without the FIEMAP_FLAG_SYNC flag, for a file that has delalloc in the file range [64M, 65M[, which is currently a hole; 2) Fiemap locks the inode in shared mode, then starts iterating the inode\'s subvolume tree searching for file extent items, without having the whole fiemap target range locked in the inode\'s io tree - the change introduced recently by commit b0ad381fa769 (btrfs: fix deadlock with fiemap and extent locking). It only locks ranges in the io tree when it finds a hole or prealloc extent since that commit; 3) Note that fiemap clones each leaf before using it, and this is to avoid deadlocks when locking a file range in the inode\'s io tree and the fiemap buffer is memory mapped to some file, because writing to the page with btrfs_page_mkwrite() will wait on any ordered extent for the page\'s range and the ordered extent needs to lock the range and may need to modify the same leaf, therefore leading to a deadlock on the leaf; 4) While iterating the file extent items in the cloned leaf before finding the hole in the range [64M, 65M[, the delalloc in that range is flushed and its ordered extent completes - meaning the corresponding file extent item is in the inode\'s subvolume tree, but not present in the cloned leaf that fiemap is iterating over; 5) When fiemap finds the hole in the [64M, 65M[ range by seeing the gap in the cloned leaf (or a file extent item with disk_bytenr == 0 in case the NO_HOLES feature is not enabled), it will lock that file range in the inode\'s io tree and then search for delalloc by checking for the EXTENT_DELALLOC bit in the io tree for that range and ordered extents (with btrfs_find_delalloc_in_range()). But it finds nothing since the delalloc in that range was already flushed and the ordered extent completed and is gone - as a result fiemap will not report that there\'s delalloc or an extent for the range [64M, 65M[, so user space will be mislead into thinking that there\'s a hole in that range. This could actually be sporadically triggered with test case generic/094 from fstests, which reports a missing extent/delalloc range like this: generic/094 2s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad) --- tests/generic/094.out 2020-06-10 19:29:03.830519425 +0100 +++ /home/fdmanana/git/hub/xfstests/results//generic/094.out.bad 2024-02-28 11:00:00.381071525 +0000 @@ -1,3 +1,9 @@ QA output created by 094 fiemap run with sync fiemap run without sync +ERROR: couldn\'t find extent at 7 +map is \'HHDDHPPDPHPH\' +logical: [ 5.. 6] phys: ---truncated--- | -- | May 1, 2024 | n/a |
| CVE-2024-27081 | ESPHome is a system to control your ESP8266/ESP32. A security misconfiguration in the edit configuration file API in the dashboard component of ESPHome version 2023.12.9 (command line installation) allows authenticated remote attackers to read and write arbitrary files under the configuration directory rendering remote code execution possible. This vulnerability is patched in 2024.2.1. | -- | Feb 26, 2024 | n/a |
| CVE-2024-27082 | Cacti provides an operational monitoring and fault management framework. Versions of Cacti prior to 1.2.27 are vulnerable to stored cross-site scripting, a type of cross-site scripting where malicious scripts are permanently stored on a target server and served to users who access a particular page. Version 1.2.27 contains a patch for the issue. | -- | May 14, 2024 | n/a |
| CVE-2024-27083 | Flask-AppBuilder is an application development framework, built on top of Flask. A Cross-Site Scripting (XSS) vulnerability has been discovered on the OAuth login page. An attacker could trick a user to follow a specially crafted URL to the OAuth login page. This URL could inject and execute malicious javascript code that would get executed on the user\'s browser. This issue was introduced on 4.1.4 and patched on 4.2.1. | -- | Feb 29, 2024 | n/a |
| CVE-2024-27084 | Rejected reason: This CVE is a duplicate of CVE-2024-1631. | -- | Feb 26, 2024 | n/a |
| CVE-2024-27085 | Discourse is an open source platform for community discussion. In affected versions users that are allowed to invite others can inject arbitrarily large data in parameters used in the invite route. The problem has been patched in the latest version of Discourse. Users are advised to upgrade. Users unable to upgrade should disable invites or restrict access to them using the `invite allowed groups` site setting. | -- | Mar 17, 2024 | n/a |
| CVE-2024-27086 | The MSAL library enabled acquisition of security tokens to call protected APIs. MSAL.NET applications targeting Xamarin Android and .NET Android (e.g., MAUI) using the library from versions 4.48.0 to 4.60.0 are impacted by a low severity vulnerability. A malicious application running on a customer Android device can cause local denial of service against applications that were built using MSAL.NET for authentication on the same device (i.e., prevent the user of the legitimate application from logging in) due to incorrect activity export configuration. MSAL.NET version 4.60.1 includes the fix. As a workaround, a developer may explicitly mark the MSAL.NET activity non-exported. | -- | Apr 16, 2024 | n/a |
| CVE-2024-27087 | Kirby is a content management system. The new link field introduced in Kirby 4 allows several different link types that each validate the entered link to the relevant URL format. It also includes a Custom link type for advanced use cases that don\'t fit any of the pre-defined link formats. As the Custom link type is meant to be flexible, it also allows the javascript: URL scheme. In some use cases this can be intended, but it can also be misused by attackers to execute arbitrary JavaScript code when a user or visitor clicks on a link that is generated from the contents of the link field. This vulnerability is patched in 4.1.1. | -- | Feb 26, 2024 | n/a |
| CVE-2024-27088 | es5-ext contains ECMAScript 5 extensions. Passing functions with very long names or complex default argument names into `function#copy` or `function#toStringTokens` may cause the script to stall. The vulnerability is patched in v0.10.63. | -- | Feb 26, 2024 | n/a |
| CVE-2024-27089 | Rejected reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not in the allowed scope of that CNA\'s CVE ID assignments. | -- | Feb 26, 2024 | n/a |
| CVE-2024-27091 | GeoNode is a geospatial content management system, a platform for the management and publication of geospatial data. An issue exists within GEONODE where the current rich text editor is vulnerable to Stored XSS. The applications cookies are set securely, but it is possible to retrieve a victims CSRF token and issue a request to change another user\'s email address to perform a full account takeover. Due to the script element not impacting the CORS policy, requests will succeed. This vulnerability is fixed in 4.2.3. | -- | Mar 27, 2024 | n/a |
| CVE-2024-27092 | Hoppscotch is an API development ecosystem. Due to lack of validation for fields like Label (Edit Team) - TeamName, bad actors can send emails with Spoofed Content as Hoppscotch. Part of payload (external link) is presented in clickable form - easier to achieve own goals by malicious actors. This issue is fixed in 2023.12.6. | -- | Feb 29, 2024 | n/a |
| CVE-2024-27093 | Minder is a Software Supply Chain Security Platform. In version 0.0.31 and earlier, it is possible for an attacker to register a repository with a invalid or differing upstream ID, which causes Minder to report the repository as registered, but not remediate any future changes which conflict with policy (because the webhooks for the repo do not match any known repository in the database). When attempting to register a repo with a different repo ID, the registered provider must have admin on the named repo, or a 404 error will result. Similarly, if the stored provider token does not have repo access, then the remediations will not apply successfully. Lastly, it appears that reconciliation actions do not execute against repos with this type of mismatch. This appears to primarily be a potential denial-of-service vulnerability. This vulnerability is patched in version 0.20240226.1425+ref.53868a8. | -- | Feb 26, 2024 | n/a |
| CVE-2024-27094 | OpenZeppelin Contracts is a library for secure smart contract development. The `Base64.encode` function encodes a `bytes` input by iterating over it in chunks of 3 bytes. When this input is not a multiple of 3, the last iteration may read parts of the memory that are beyond the input buffer. The vulnerability is fixed in 5.0.2 and 4.9.6. | -- | Mar 21, 2024 | n/a |
| CVE-2024-27096 | GLPI is a Free Asset and IT Management Software package, Data center management, ITIL Service Desk, licenses tracking and software auditing. An authenticated user can exploit a SQL injection vulnerability in the search engine to extract data from the database. This issue has been patched in version 10.0.13. | -- | Mar 18, 2024 | n/a |
| CVE-2024-27097 | A user endpoint didn\'t perform filtering on an incoming parameter, which was added directly to the application log. This could lead to an attacker injecting false log entries or corrupt the log file format. This has been fixed in the CKAN versions 2.9.11 and 2.10.4. Users are advised to upgrade. Users unable to upgrade should override the `/user/reset` endpoint to filter the `id` parameter in order to exclude newlines. | -- | Mar 14, 2024 | n/a |
| CVE-2024-27098 | GLPI is a Free Asset and IT Management Software package, Data center management, ITIL Service Desk, licenses tracking and software auditing. An authenticated user can execute a SSRF based attack using Arbitrary Object Instantiation. This issue has been patched in version 10.0.13. | -- | Mar 18, 2024 | n/a |
| CVE-2024-27099 | The uAMQP is a C library for AMQP 1.0 communication to Azure Cloud Services. When processing an incorrect `AMQP_VALUE` failed state, may cause a double free problem. This may cause a RCE. Update submodule with commit 2ca42b6e4e098af2d17e487814a91d05f6ae4987. | -- | Feb 28, 2024 | n/a |
| CVE-2024-27100 | Discourse is an open source platform for community discussion. In affected versions the endpoints for suspending users, silencing users and exporting CSV files weren\'t enforcing limits on the sizes of the parameters that they accept. This could lead to excessive resource consumption which could render an instance inoperable. A site could be disrupted by either a malicious moderator on the same site or a malicious staff member on another site in the same multisite cluster. This issue is patched in the latest stable, beta and tests-passed versions of Discourse. Users are advised to upgrade. There are no known workarounds for this vulnerability. | -- | Mar 17, 2024 | n/a |
| CVE-2024-27101 | SpiceDB is an open source, Google Zanzibar-inspired database for creating and managing security-critical application permissions. Integer overflow in chunking helper causes dispatching to miss elements or panic. Any SpiceDB cluster with any schema where a resource being checked has more than 65535 relationships for the same resource and subject type is affected by this problem. The CheckPermission, BulkCheckPermission, and LookupSubjects API methods are affected. This vulnerability is fixed in 1.29.2. | -- | Mar 1, 2024 | n/a |
| CVE-2024-27102 | Wings is the server control plane for Pterodactyl Panel. This vulnerability impacts anyone running the affected versions of Wings. The vulnerability can potentially be used to access files and directories on the host system. The full scope of impact is exactly unknown, but reading files outside of a server\'s base directory (sandbox root) is possible. In order to use this exploit, an attacker must have an existing server allocated and controlled by Wings. Details on the exploitation of this vulnerability are embargoed until March 27th, 2024 at 18:00 UTC. In order to mitigate this vulnerability, a full rewrite of the entire server filesystem was necessary. Because of this, the size of the patch is massive, however effort was made to reduce the amount of breaking changes. Users are advised to update to version 1.11.9. There are no known workarounds for this vulnerability. | -- | Mar 14, 2024 | n/a |
| CVE-2024-27103 | Querybook is a Big Data Querying UI. When a user searches for their queries, datadocs, tables and lists, the search result is marked and highlighted, and this feature uses dangerouslySetInnerHTML which means that if the highlighted result has an XSS payload it will trigger. While the input to dangerouslySetInnerHTML is not sanitized for the data inside of queries which leads to an XSS vulnerability. During the query auto-suggestion the name of the suggested tables are set with innerHTML which leads to the XSS vulnerability. A patch to rectify this issue has been introduced in Querybook version 3.31.2. | -- | Feb 29, 2024 | n/a |
| CVE-2024-27104 | GLPI is a Free Asset and IT Management Software package, Data center management, ITIL Service Desk, licenses tracking and software auditing. A user with rights to create and share dashboards can build a dashboard containing javascript code. Any user that will open this dashboard will be subject to an XSS attack. This issue has been patched in version 10.0.13. | -- | Mar 18, 2024 | n/a |
| CVE-2024-27105 | Frappe is a full-stack web application framework. Prior to versions 14.66.3 and 15.16.0, file permission can be bypassed using certain endpoints, granting less privileged users permission to delete or clone a file. Versions 14.66.3 and 15.16.0 contain a patch for this issue. No known workarounds are available. | -- | Mar 21, 2024 | n/a |
| CVE-2024-27106 | Vulnerable data in transit in GE HealthCare EchoPAC products | -- | May 14, 2024 | n/a |
| CVE-2024-27107 | Weak account password in GE HealthCare EchoPAC products | -- | May 14, 2024 | n/a |
| CVE-2024-27108 | Non privileged access to critical file vulnerability in GE HealthCare EchoPAC products | -- | May 14, 2024 | n/a |
| CVE-2024-27109 | Insufficiently protected credentials in GE HealthCare EchoPAC products | -- | May 14, 2024 | n/a |
| CVE-2024-27110 | Elevation of privilege vulnerability in GE HealthCare EchoPAC products | -- | May 14, 2024 | n/a |
| CVE-2024-27121 | Path traversal vulnerability exists in Machine Automation Controller NJ Series and Machine Automation Controller NX Series. An arbitrary file in the affected product may be accessed or arbitrary code may be executed by processing a specially crafted request sent from a remote attacker with an administrative privilege. As for the details of the affected product names/versions, see the information provided by the vendor under [References] section. | -- | Mar 12, 2024 | n/a |
| CVE-2024-27124 | An OS command injection vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to execute commands via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QTS 4.5.4.2627 build 20231225 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTS hero h4.5.4.2626 build 20231225 and later QuTScloud c5.1.5.2651 and later | -- | Apr 26, 2024 | n/a |
