The Common Vulnerabilities and Exposures (CVE) project, maintained by the MITRE Corporation, is a list of all standardized names for vulnerabilities and security exposures.
| ID | Description | Priority | Modified date | Fixed Release |
|---|---|---|---|---|
| CVE-2019-18809 | A memory leak in the af9005_identify_state() function in drivers/media/usb/dvb-usb/af9005.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-2289adbfa559. | HIGH | Nov 8, 2019 | 10.19.45.2 (Wind River Linux LTS 19) |
| CVE-2019-18808 | A memory leak in the ccp_run_sha_cmd() function in drivers/crypto/ccp/ccp-ops.c in the Linux kernel through 5.3.9 allows attackers to cause a denial of service (memory consumption), aka CID-128c66429247. | MEDIUM | Nov 8, 2019 | 10.19.45.2 (Wind River Linux LTS 19) |
| CVE-2019-18807 | Two memory leaks in the sja1105_static_config_upload() function in drivers/net/dsa/sja1105/sja1105_spi.c in the Linux kernel before 5.3.5 allow attackers to cause a denial of service (memory consumption) by triggering static_config_buf_prepare_for_upload() or sja1105_inhibit_tx() failures, aka CID-68501df92d11. | MEDIUM | Nov 8, 2019 | 10.19.45.2 (Wind River Linux LTS 19) |
| CVE-2019-18683 | An issue was discovered in drivers/media/platform/vivid in the Linux kernel through 5.3.8. It is exploitable for privilege escalation on some Linux distributions where local users have /dev/video0 access, but only if the driver happens to be loaded. There are multiple race conditions during streaming stopping in this driver (part of the V4L2 subsystem). These issues are caused by wrong mutex locking in vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out(), sdr_cap_stop_streaming(), and the corresponding kthreads. At least one of these race conditions leads to a use-after-free. | MEDIUM | Nov 8, 2019 | 10.19.45.2 (Wind River Linux LTS 19) |
| CVE-2019-10218 | A flaw was found in the samba client, all samba versions before samba 4.11.2, 4.10.10 and 4.9.15, where a malicious server can supply a pathname to the client with separators. This could allow the client to access files and folders outside of the SMB network pathnames. An attacker could use this vulnerability to create files outside of the current working directory using the privileges of the client user. | MEDIUM | Nov 6, 2019 | 10.19.45.2 (Wind River Linux LTS 19) |
| CVE-2019-18786 | In the Linux kernel through 5.3.8, f->fmt.sdr.reserved is uninitialized in rcar_drif_g_fmt_sdr_cap in drivers/media/platform/rcar_drif.c, which could cause a memory disclosure problem. | LOW | Nov 6, 2019 | 10.19.45.2 (Wind River Linux LTS 19) |
| CVE-2019-17596 | Go before 1.12.11 and 1.3.x before 1.13.2 can panic upon an attempt to process network traffic containing an invalid DSA public key. There are several attack scenarios, such as traffic from a client to a server that verifies client certificates. | MEDIUM | Oct 31, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-11043 | In PHP versions 7.1.x below 7.1.33, 7.2.x below 7.2.24 and 7.3.x below 7.3.11 in certain configurations of FPM setup it is possible to cause FPM module to write past allocated buffers into the space reserved for FCGI protocol data, thus opening the possibility of remote code execution. | HIGH | Oct 30, 2019 | 10.19.45.7 (Wind River Linux LTS 19) |
| CVE-2019-18348 | An issue was discovered in urllib2 in Python 2.x through 2.7.17 and urllib in Python 3.x through 3.8.0. CRLF injection is possible if the attacker controls a url parameter, as demonstrated by the first argument to urllib.request.urlopen with \\r\\n (specifically in the host component of a URL) followed by an HTTP header. This is similar to the CVE-2019-9740 query string issue and the CVE-2019-9947 path string issue. (This is not exploitable when glibc has CVE-2016-10739 fixed.). This is fixed in: v2.7.18, v2.7.18rc1; v3.5.10, v3.5.10rc1; v3.6.11, v3.6.11rc1, v3.6.12; v3.7.8, v3.7.8rc1, v3.7.9; v3.8.3, v3.8.3rc1, v3.8.4, v3.8.4rc1, v3.8.5, v3.8.6, v3.8.6rc1. | MEDIUM | Oct 29, 2019 | 10.19.45.7 (Wind River Linux LTS 19) |
| CVE-2019-18197 | In xsltCopyText in transform.c in libxslt 1.1.33, a pointer variable isn\'t reset under certain circumstances. If the relevant memory area happened to be freed and reused in a certain way, a bounds check could fail and memory outside a buffer could be written to, or uninitialized data could be disclosed. | MEDIUM | Oct 27, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-18218 | cdf_read_property_info in cdf.c in file through 5.37 does not restrict the number of CDF_VECTOR elements, which allows a heap-based buffer overflow (4-byte out-of-bounds write). | HIGH | Oct 26, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-17666 | rtl_p2p_noa_ie in drivers/net/wireless/realtek/rtlwifi/ps.c in the Linux kernel through 5.3.6 lacks a certain upper-bound check, leading to a buffer overflow. | HIGH | Oct 24, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-17498 | In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in packet.c has an integer overflow in a bounds check, enabling an attacker to specify an arbitrary (out-of-bounds) offset for a subsequent memory read. A crafted SSH server may be able to disclose sensitive information or cause a denial of service condition on the client system when a user connects to the server. | MEDIUM | Oct 23, 2019 | 10.19.45.12 (Wind River Linux LTS 19) |
| CVE-2019-14287 | In Sudo before 1.8.28, an attacker with access to a Runas ALL sudoer account can bypass certain policy blacklists and session PAM modules, and can cause incorrect logging, by invoking sudo with a crafted user ID. For example, this allows bypass of !root configuration, and USER= logging, for a sudo -u \\#$((0xffffffff)) command. | HIGH | Oct 23, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-17546 | tif_getimage.c in LibTIFF through 4.0.10, as used in GDAL through 3.0.1 and other products, has an integer overflow that potentially causes a heap-based buffer overflow via a crafted RGBA image, related to a Negative-size-param condition. | MEDIUM | Oct 20, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-2974 | Vulnerability in the MySQL Server product of Oracle MySQL (component: Server: Optimizer). Supported versions that are affected are 5.6.45 and prior, 5.7.27 and prior and 8.0.17 and prior. Easily exploitable vulnerability allows low privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.0 Base Score 6.5 (Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H). | MEDIUM | Oct 18, 2019 | 10.19.45.6 (Wind River Linux LTS 19) |
| CVE-2019-2938 | Vulnerability in the MySQL Server product of Oracle MySQL (component: InnoDB). Supported versions that are affected are 5.7.27 and prior and 8.0.17 and prior. Difficult to exploit vulnerability allows high privileged attacker with network access via multiple protocols to compromise MySQL Server. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of MySQL Server. CVSS 3.0 Base Score 4.4 (Availability impacts). CVSS Vector: (CVSS:3.0/AV:N/AC:H/PR:H/UI:N/S:U/C:N/I:N/A:H). | LOW | Oct 17, 2019 | 10.19.45.6 (Wind River Linux LTS 19) |
| CVE-2019-17133 | In the Linux kernel through 5.3.2, cfg80211_mgd_wext_giwessid in net/wireless/wext-sme.c does not reject a long SSID IE, leading to a Buffer Overflow. | High | Oct 10, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-17451 | An issue was discovered in the Binary File Descriptor (BFD) library (aka libbfd), as distributed in GNU Binutils 2.32. It is an integer overflow leading to a SEGV in _bfd_dwarf2_find_nearest_line in dwarf2.c, as demonstrated by nm. | MEDIUM | Oct 10, 2019 | 10.19.45.6 (Wind River Linux LTS 19) |
| CVE-2019-17450 | find_abstract_instance in dwarf2.c in the Binary File Descriptor (BFD) library (aka libbfd), as distributed in GNU Binutils 2.32, allows remote attackers to cause a denial of service (infinite recursion and application crash) via a crafted ELF file. | MEDIUM | Oct 10, 2019 | 10.19.45.6 (Wind River Linux LTS 19) |
| CVE-2019-3689 | The nfs-utils package in SUSE Linux Enterprise Server 12 before and including version 1.3.0-34.18.1 and in SUSE Linux Enterprise Server 15 before and including version 2.1.1-6.10.2 the directory /var/lib/nfs is owned by statd:nogroup. This directory contains files owned and managed by root. If statd is compromised, it can therefore trick processes running with root privileges into creating/overwriting files anywhere on the system. | High | Oct 9, 2019 | 10.19.45.9 (Wind River Linux LTS 19) |
| CVE-2019-16935 | The documentation XML-RPC server in Python through 2.7.16, 3.x through 3.6.9, and 3.7.x through 3.7.4 has XSS via the server_title field. This occurs in Lib/DocXMLRPCServer.py in Python 2.x, and in Lib/xmlrpc/server.py in Python 3.x. If set_server_title is called with untrusted input, arbitrary JavaScript can be delivered to clients that visit the http URL for this server. | Medium | Oct 9, 2019 | 10.19.45.6 (Wind River Linux LTS 19) |
| CVE-2019-16905 | OpenSSH 7.7 through 7.9 and 8.x before 8.1, when compiled with an experimental key type, has a pre-authentication integer overflow if a client or server is configured to use a crafted XMSS key. This leads to memory corruption and local code execution because of an error in the XMSS key parsing algorithm. NOTE: the XMSS implementation is considered experimental in all released OpenSSH versions, and there is no supported way to enable it when building portable OpenSSH. | MEDIUM | Oct 9, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-6471 | A race condition which may occur when discarding malformed packets can result in BIND exiting due to a REQUIRE assertion failure in dispatch.c. Versions affected: BIND 9.11.0 -> 9.11.7, 9.12.0 -> 9.12.4-P1, 9.14.0 -> 9.14.2. Also all releases of the BIND 9.13 development branch and version 9.15.0 of the BIND 9.15 development branch and BIND Supported Preview Edition versions 9.11.3-S1 -> 9.11.7-S1. | MEDIUM | Oct 9, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2018-5743 | By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743. | MEDIUM | Oct 9, 2019 | 10.19.45.2 (Wind River Linux LTS 19) |
| CVE-2019-17075 | An issue was discovered in write_tpt_entry in drivers/infiniband/hw/cxgb4/mem.c in the Linux kernel through 5.3.2. The cxgb4 driver is directly calling dma_map_single (a DMA function) from a stack variable. This could allow an attacker to trigger a Denial of Service, exploitable if this driver is used on an architecture for which this stack/DMA interaction has security relevance. | High | Oct 8, 2019 | 10.19.45.2 (Wind River Linux LTS 19) |
| CVE-2019-17056 | llcp_sock_create in net/nfc/llcp_sock.c in the AF_NFC network module in the Linux kernel through 5.3.2 does not enforce CAP_NET_RAW, which means that unprivileged users can create a raw socket, aka CID-3a359798b176. | Low | Oct 8, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-17055 | base_sock_create in drivers/isdn/mISDN/socket.c in the AF_ISDN network module in the Linux kernel through 5.3.2 does not enforce CAP_NET_RAW, which means that unprivileged users can create a raw socket, aka CID-b91ee4aa2a21. | Low | Oct 8, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-17054 | atalk_create in net/appletalk/ddp.c in the AF_APPLETALK network module in the Linux kernel through 5.3.2 does not enforce CAP_NET_RAW, which means that unprivileged users can create a raw socket, aka CID-6cc03e8aa36c. | Low | Oct 8, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-17053 | ieee802154_create in net/ieee802154/socket.c in the AF_IEEE802154 network module in the Linux kernel through 5.3.2 does not enforce CAP_NET_RAW, which means that unprivileged users can create a raw socket, aka CID-e69dbd4619e7. | Low | Oct 8, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-16884 | runc through 1.0.0-rc8, as used in Docker through 19.03.2-ce and other products, allows AppArmor restriction bypass because libcontainer/rootfs_linux.go incorrectly checks mount targets, and thus a malicious Docker image can mount over a /proc directory. | Medium | Oct 7, 2019 | 10.19.45.28 (Wind River Linux LTS 19) |
| CVE-2019-16276 | Go before 1.12.10 and 1.13.x before 1.13.1 allow HTTP Request Smuggling. | Medium | Oct 7, 2019 | 10.19.45.6 (Wind River Linux LTS 19) |
| CVE-2019-17041 | An issue was discovered in Rsyslog v8.1908.0. contrib/pmaixforwardedfrom/pmaixforwardedfrom.c has a heap overflow in the parser for AIX log messages. The parser tries to locate a log message delimiter (in this case, a space or a colon) but fails to account for strings that do not satisfy this constraint. If the string does not match, then the variable lenMsg will reach the value zero and will skip the sanity check that detects invalid log messages. The message will then be considered valid, and the parser will eat up the nonexistent colon delimiter. In doing so, it will decrement lenMsg, a signed integer, whose value was zero and now becomes minus one. The following step in the parser is to shift left the contents of the message. To do this, it will call memmove with the right pointers to the target and destination strings, but the lenMsg will now be interpreted as a huge value, causing a heap overflow. | HIGH | Oct 7, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-13627 | It was discovered that there was a ECDSA timing attack in the libgcrypt20 cryptographic library. Version affected: 1.8.4-5, 1.7.6-2+deb9u3, and 1.6.3-2+deb8u4. Versions fixed: 1.8.5-2 and 1.6.3-2+deb8u7. | Medium | Oct 2, 2019 | 10.19.45.6 (Wind River Linux LTS 19) |
| CVE-2019-9278 | In libexif, there is a possible out of bounds write due to an integer overflow. This could lead to remote escalation of privilege in the media content provider with no additional execution privileges needed. User interaction is needed for exploitation. Product: AndroidVersions: Android-10Android ID: A-112537774 | Medium | Sep 30, 2019 | 10.19.45.11 (Wind River Linux LTS 19) |
| CVE-2019-5094 | An exploitable code execution vulnerability exists in the quota file functionality of E2fsprogs 1.45.3. A specially crafted ext4 partition can cause an out-of-bounds write on the heap, resulting in code execution. An attacker can corrupt a partition to trigger this vulnerability. | Medium | Sep 27, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-12068 | In QEMU 1:4.1-1, 1:2.1+dfsg-12+deb8u6, 1:2.8+dfsg-6+deb9u8, 1:3.1+dfsg-8~deb10u1, 1:3.1+dfsg-8+deb10u2, and 1:2.1+dfsg-12+deb8u12 (fixed), when executing script in lsi_execute_script(), the LSI scsi adapter emulator advances \'s->dsp\' index to read next opcode. This can lead to an infinite loop if the next opcode is empty. Move the existing loop exit after 10k iterations so that it covers no-op opcodes as well. | Medium | Sep 26, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-16275 | hostapd before 2.10 and wpa_supplicant before 2.10 allow an incorrect indication of disconnection in certain situations because source address validation is mishandled. This is a denial of service that should have been prevented by PMF (aka management frame protection). The attacker must send a crafted 802.11 frame from a location that is within the 802.11 communications range. | Low | Sep 13, 2019 | 10.19.45.2 (Wind River Linux LTS 19) |
| CVE-2019-16232 | drivers/net/wireless/marvell/libertas/if_sdio.c in the Linux kernel 5.2.14 does not check the alloc_workqueue return value, leading to a NULL pointer dereference. | High | Sep 13, 2019 | 10.19.45.5 (Wind River Linux LTS 19) |
| CVE-2019-16167 | sysstat before 12.1.6 has memory corruption due to an Integer Overflow in remap_struct() in sa_common.c. | Medium | Sep 13, 2019 | 10.19.45.6 (Wind River Linux LTS 19) |
| CVE-2019-16234 | drivers/net/wireless/intel/iwlwifi/pcie/trans.c in the Linux kernel 5.2.14 does not check the alloc_workqueue return value, leading to a NULL pointer dereference. | High | Sep 12, 2019 | 10.19.45.23 (Wind River Linux LTS 19) |
| CVE-2019-16056 | An issue was discovered in Python through 2.7.16, 3.x through 3.5.7, 3.6.x through 3.6.9, and 3.7.x through 3.7.4. The email module wrongly parses email addresses that contain multiple @ characters. An application that uses the email module and implements some kind of checks on the From/To headers of a message could be tricked into accepting an email address that should be denied. An attack may be the same as in CVE-2019-11340; however, this CVE applies to Python more generally. | Medium | Sep 11, 2019 | 10.19.45.6 (Wind River Linux LTS 19) |
| CVE-2019-16168 | In SQLite through 3.29.0, whereLoopAddBtreeIndex in sqlite3.c can crash a browser or other application because of missing validation of a sqlite_stat1 sz field, aka a severe division by zero in the query planner. | Medium | Sep 10, 2019 | 10.19.45.6 (Wind River Linux LTS 19) |
| CVE-2018-21010 | OpenJPEG before 2.3.1 has a heap buffer overflow in color_apply_icc_profile in bin/common/color.c. | Medium | Sep 5, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-15132 | Zabbix through 4.4.0alpha1 allows User Enumeration. With login requests, it is possible to enumerate application usernames based on the variability of server responses (e.g., the Login name or password is incorrect and No permissions for system access messages, or just blocking for a number of seconds). This affects both api_jsonrpc.php and index.php. | Medium | Aug 29, 2019 | 10.19.45.27 (Wind River Linux LTS 19) |
| CVE-2019-11250 | The Kubernetes client-go library logs request headers at verbosity levels of 7 or higher. This can disclose credentials to unauthorized users via logs or command output. Kubernetes components (such as kube-apiserver) prior to v1.16.0, which make use of basic or bearer token authentication, and run at high verbosity levels, are affected. | LOW | Aug 29, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2018-20969 | do_ed_script in pch.c in GNU patch through 2.7.6 does not block strings beginning with a ! character. NOTE: this is the same commit as for CVE-2019-13638, but the ! syntax is specific to ed, and is unrelated to a shell metacharacter. | High | Aug 27, 2019 | 10.19.45.4 (Wind River Linux LTS 19) |
| CVE-2019-14973 | _TIFFCheckMalloc and _TIFFCheckRealloc in tif_aux.c in LibTIFF through 4.0.10 mishandle Integer Overflow checks because they rely on compiler behavior that is undefined by the applicable C standards. This can, for example, lead to an application crash. | Medium | Aug 25, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-13106 | Das U-Boot versions 2016.09 through 2019.07-rc4 can memset() too much data while reading a crafted ext4 filesystem, which results in a stack buffer overflow and likely code execution. | HIGH | Aug 7, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
| CVE-2019-13105 | Das U-Boot versions 2019.07-rc1 through 2019.07-rc4 can double-free a cached block of data when listing files in a crafted ext4 filesystem. | MEDIUM | Aug 7, 2019 | 10.19.45.1 (Wind River Linux LTS 19) |
