The Common Vulnerabilities and Exposures (CVE) project, maintained by the MITRE Corporation, is a list of all standardized names for vulnerabilities and security exposures.
| ID | Description | Priority | Modified date | Fixed Release |
|---|---|---|---|---|
| CVE-2020-25687 | A flaw was found in dnsmasq before version 2.83. A heap-based buffer overflow was discovered in dnsmasq when DNSSEC is enabled and before it validates the received DNS entries. This flaw allows a remote attacker, who can create valid DNS replies, to cause an overflow in a heap-allocated memory. This flaw is caused by the lack of length checks in rfc1035.c:extract_name(), which could be abused to make the code execute memcpy() with a negative size in sort_rrset() and cause a crash in dnsmasq, resulting in a denial of service. The highest threat from this vulnerability is to system availability. | HIGH | Jan 20, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2021-3178 | fs/nfsd/nfs3xdr.c in the Linux kernel through 5.10.8, when there is an NFS export of a subdirectory of a filesystem, allows remote attackers to traverse to other parts of the filesystem via READDIRPLUS. NOTE: some parties argue that such a subdirectory export is not intended to prevent this attack; see also the exports(5) no_subtree_check default behavior | MEDIUM | Jan 20, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-25686 | A flaw was found in dnsmasq before version 2.83. When receiving a query, dnsmasq does not check for an existing pending request for the same name and forwards a new request. By default, a maximum of 150 pending queries can be sent to upstream servers, so there can be at most 150 queries for the same name. This flaw allows an off-path attacker on the network to substantially reduce the number of attempts that it would have to perform to forge a reply and have it accepted by dnsmasq. This issue is mentioned in the Birthday Attacks section of RFC5452. If chained with CVE-2020-25684, the attack complexity of a successful attack is reduced. The highest threat from this vulnerability is to data integrity. | MEDIUM | Jan 20, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-25683 | A flaw was found in dnsmasq before version 2.83. A heap-based buffer overflow was discovered in dnsmasq when DNSSEC is enabled and before it validates the received DNS entries. A remote attacker, who can create valid DNS replies, could use this flaw to cause an overflow in a heap-allocated memory. This flaw is caused by the lack of length checks in rfc1035.c:extract_name(), which could be abused to make the code execute memcpy() with a negative size in get_rdata() and cause a crash in dnsmasq, resulting in a denial of service. The highest threat from this vulnerability is to system availability. | HIGH | Jan 20, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-25684 | A flaw was found in dnsmasq before version 2.83. When getting a reply from a forwarded query, dnsmasq checks in the forward.c:reply_query() if the reply destination address/port is used by the pending forwarded queries. However, it does not use the address/port to retrieve the exact forwarded query, substantially reducing the number of attempts an attacker on the network would have to perform to forge a reply and get it accepted by dnsmasq. This issue contrasts with RFC5452, which specifies a query\'s attributes that all must be used to match a reply. This flaw allows an attacker to perform a DNS Cache Poisoning attack. If chained with CVE-2020-25685 or CVE-2020-25686, the attack complexity of a successful attack is reduced. The highest threat from this vulnerability is to data integrity. | MEDIUM | Jan 20, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2021-3177 | Python 3.x through 3.9.1 has a buffer overflow in PyCArg_repr in _ctypes/callproc.c, which may lead to remote code execution in certain Python applications that accept floating-point numbers as untrusted input, as demonstrated by a 1e300 argument to c_double.from_param. This occurs because sprintf is used unsafely. | HIGH | Jan 19, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-28374 | In drivers/target/target_core_xcopy.c in the Linux kernel before 5.10.7, insufficient identifier checking in the LIO SCSI target code can be used by remote attackers to read or write files via directory traversal in an XCOPY request, aka CID-2896c93811e3. For example, an attack can occur over a network if the attacker has access to one iSCSI LUN. The attacker gains control over file access because I/O operations are proxied via an attacker-selected backstore. | MEDIUM | Jan 16, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2021-3121 | An issue was discovered in GoGo Protobuf before 1.3.2. plugin/unmarshal/unmarshal.go lacks certain index validation, aka the skippy peanut butter issue. | HIGH | Jan 14, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2021-23240 | selinux_edit_copy_tfiles in sudoedit in Sudo before 1.9.5 allows a local unprivileged user to gain file ownership and escalate privileges by replacing a temporary file with a symlink to an arbitrary file target. This affects SELinux RBAC support in permissive mode. Machines without SELinux are not vulnerable. | MEDIUM | Jan 14, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-25709 | A flaw was found in OpenLDAP. This flaw allows an attacker who can send a malicious packet to be processed by OpenLDAP’s slapd server, to trigger an assertion failure. The highest threat from this vulnerability is to system availability. | MEDIUM | Jan 14, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-25710 | A flaw was found in OpenLDAP in versions before 2.4.56. This flaw allows an attacker who sends a malicious packet processed by OpenLDAP to force a failed assertion in csnNormalize23(). The highest threat from this vulnerability is to system availability. | MEDIUM | Jan 14, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-16119 | Use-after-free vulnerability in the Linux kernel exploitable by a local attacker due to reuse of a DCCP socket with an attached dccps_hc_tx_ccid object as a listener after being released. Fixed in Ubuntu Linux kernel 5.4.0-51.56, 5.3.0-68.63, 4.15.0-121.123, 4.4.0-193.224, 3.13.0.182.191 and 3.2.0-149.196. | MEDIUM | Jan 14, 2021 | 10.18.44.28 (Wind River Linux LTS 18) |
| CVE-2021-0342 | In tun_get_user of tun.c, there is possible memory corruption due to a use after free. This could lead to local escalation of privilege with System execution privileges required. User interaction is not required for exploitation. Product: Android; Versions: Android kernel; Android ID: A-146554327. | MEDIUM | Jan 13, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2021-21252 | The jQuery Validation Plugin provides drop-in validation for your existing forms. It is published as an npm package jquery-validation. jquery-validation before version 1.19.3 contains one or more regular expressions that are vulnerable to ReDoS (Regular Expression Denial of Service). This is fixed in 1.19.3. | MEDIUM | Jan 13, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2021-23239 | The sudoedit personality of Sudo before 1.9.5 may allow a local unprivileged user to perform arbitrary directory-existence tests by winning a sudo_edit.c race condition in replacing a user-controlled directory by a symlink to an arbitrary path. | LOW | Jan 12, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-35512 | A use-after-free flaw was found in D-Bus Development branch <= 1.13.16, dbus-1.12.x stable branch <= 1.12.18, and dbus-1.10.x and older branches <= 1.10.30 when a system has multiple usernames sharing the same UID. When a set of policy rules references these usernames, D-Bus may free some memory in the heap, which is still used by data structures necessary for the other usernames sharing the UID, possibly leading to a crash or other undefined behaviors | HIGH | Jan 11, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-25678 | A flaw was found in ceph in versions prior to 16.y.z where ceph stores mgr module passwords in clear text. This can be found by searching the mgr logs for grafana and dashboard, with passwords visible. | MEDIUM | Jan 8, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-36158 | mwifiex_cmd_802_11_ad_hoc_start in drivers/net/wireless/marvell/mwifiex/join.c in the Linux kernel through 5.10.4 might allow remote attackers to execute arbitrary code via a long SSID value, aka CID-5c455c5ab332. | HIGH | Jan 8, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-35494 | There\'s a flaw in binutils /opcodes/tic4x-dis.c. An attacker who is able to submit a crafted input file to be processed by binutils could cause usage of uninitialized memory. The highest threat is to application availability with a lower threat to data confidentiality. This flaw affects binutils versions prior to 2.34. | MEDIUM | Jan 7, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-35493 | A flaw exists in binutils in bfd/pef.c. An attacker who is able to submit a crafted PEF file to be parsed by objdump could cause a heap buffer overflow -> out-of-bounds read that could lead to an impact to application availability. This flaw affects binutils versions prior to 2.34. | MEDIUM | Jan 7, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2019-25013 | The iconv feature in the GNU C Library (aka glibc or libc6) through 2.32, when processing invalid multi-byte input sequences in the EUC-KR encoding, may have a buffer over-read. | MEDIUM | Jan 6, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-35965 | decode_frame in libavcodec/exr.c in FFmpeg 4.3.1 has an out-of-bounds write because of errors in calculations of when to perform memset zero operations. | MEDIUM | Jan 5, 2021 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-11947 | iscsi_aio_ioctl_cb in block/iscsi.c in QEMU 4.1.0 has a heap-based buffer over-read that may disclose unrelated information from process memory to an attacker. | LOW | Dec 31, 2020 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2019-12953 | Dropbear 2011.54 through 2018.76 has an inconsistent failure delay that may lead to revealing valid usernames, a different issue than CVE-2018-15599. | MEDIUM | Dec 30, 2020 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-27781 | User credentials can be manipulated and stolen by Native CephFS consumers of OpenStack Manila, resulting in potential privilege escalation. An Open Stack Manila user can request access to a share to an arbitrary cephx user, including existing users. The access key is retrieved via the interface drivers. Then, all users of the requesting OpenStack project can view the access key. This enables the attacker to target any resource that the user has access to. This can be done to even admin users, compromising the ceph administrator. This flaw affects Ceph versions prior to 14.2.16, 15.x prior to 15.2.8, and 16.x prior to 16.2.0. | LOW | Dec 19, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-29569 | An issue was discovered in the Linux kernel through 5.10.1, as used with Xen through 4.14.x. The Linux kernel PV block backend expects the kernel thread handler to reset ring->xenblkd to NULL when stopped. However, the handler may not have time to run if the frontend quickly toggles between the states connect and disconnect. As a consequence, the block backend may re-use a pointer after it was freed. A misbehaving guest can trigger a dom0 crash by continuously connecting / disconnecting a block frontend. Privilege escalation and information leaks cannot be ruled out. This only affects systems with a Linux blkback. | HIGH | Dec 18, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-29361 | An issue was discovered in p11-kit 0.21.1 through 0.23.21. Multiple integer overflows have been discovered in the array allocations in the p11-kit library and the p11-kit list command, where overflow checks are missing before calling realloc or calloc. | MEDIUM | Dec 18, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-29362 | An issue was discovered in p11-kit 0.21.1 through 0.23.21. A heap-based buffer over-read has been discovered in the RPC protocol used by thep11-kit server/remote commands and the client library. When the remote entity supplies a byte array through a serialized PKCS#11 function call, the receiving entity may allow the reading of up to 4 bytes of memory past the heap allocation. | MEDIUM | Dec 16, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-29363 | An issue was discovered in p11-kit 0.23.6 through 0.23.21. A heap-based buffer overflow has been discovered in the RPC protocol used by p11-kit server/remote commands and the client library. When the remote entity supplies a serialized byte array in a CK_ATTRIBUTE, the receiving entity may not allocate sufficient length for the buffer to store the deserialized value. | HIGH | Dec 16, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-0444 | In audit_free_lsm_field of auditfilter.c, there is a possible bad kfree due to a logic error in audit_data_to_entry. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android kernelAndroid ID: A-150693166References: Upstream kernel | HIGH | Dec 15, 2020 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-29511 | The encoding/xml package in Go (all versions) does not correctly preserve the semantics of element namespace prefixes during tokenization round-trips, which allows an attacker to craft inputs that behave in conflicting ways during different stages of processing in affected downstream applications. | HIGH | Dec 15, 2020 | 10.18.44.23 (Wind River Linux LTS 18) |
| CVE-2020-29510 | The encoding/xml package in Go versions 1.15 and earlier does not correctly preserve the semantics of directives during tokenization round-trips, which allows an attacker to craft inputs that behave in conflicting ways during different stages of processing in affected downstream applications. | HIGH | Dec 15, 2020 | 10.18.44.23 (Wind River Linux LTS 18) |
| CVE-2020-29509 | The encoding/xml package in Go (all versions) does not correctly preserve the semantics of attribute namespace prefixes during tokenization round-trips, which allows an attacker to craft inputs that behave in conflicting ways during different stages of processing in affected downstream applications. | HIGH | Dec 15, 2020 | 10.18.44.23 (Wind River Linux LTS 18) |
| CVE-2020-29660 | A locking inconsistency issue was discovered in the tty subsystem of the Linux kernel through 5.9.13. drivers/tty/tty_io.c and drivers/tty/tty_jobctrl.c may allow a read-after-free attack against TIOCGSID, aka CID-c8bcd9c5be24. | HIGH | Dec 11, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-29661 | A locking issue was discovered in the tty subsystem of the Linux kernel through 5.9.13. drivers/tty/tty_jobctrl.c allows a use-after-free attack against TIOCSPGRP, aka CID-54ffccbf053b. | HIGH | Dec 11, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-27821 | A flaw was found in the memory management API of QEMU during the initialization of a memory region cache. This issue could lead to an out-of-bounds write access to the MSI-X table while performing MMIO operations. A guest user may abuse this flaw to crash the QEMU process on the host, resulting in a denial of service. This flaw affects QEMU versions prior to 5.2.0. | LOW | Dec 10, 2020 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-1971 | The X.509 GeneralName type is a generic type for representing different types of names. One of those name types is known as EDIPartyName. OpenSSL provides a function GENERAL_NAME_cmp which compares different instances of a GENERAL_NAME to see if they are equal or not. This function behaves incorrectly when both GENERAL_NAMEs contain an EDIPARTYNAME. A NULL pointer dereference and a crash may occur leading to a possible denial of service attack. OpenSSL itself uses the GENERAL_NAME_cmp function for two purposes: 1) Comparing CRL distribution point names between an available CRL and a CRL distribution point embedded in an X509 certificate 2) When verifying that a timestamp response token signer matches the timestamp authority name (exposed via the API functions TS_RESP_verify_response and TS_RESP_verify_token) If an attacker can control both items being compared then that attacker could trigger a crash. For example if the attacker can trick a client or server into checking a malicious certificate against a malicious CRL then this may occur. Note that some applications automatically download CRLs based on a URL embedded in a certificate. This checking happens prior to the signatures on the certificate and CRL being verified. OpenSSL\'s s_server, s_client and verify tools have support for the -crl_download option which implements automatic CRL downloading and this attack has been demonstrated to work against those tools. Note that an unrelated bug means that affected versions of OpenSSL cannot parse or construct correct encodings of EDIPARTYNAME. However it is possible to construct a malformed EDIPARTYNAME that OpenSSL\'s parser will accept and hence trigger this attack. All OpenSSL 1.1.1 and 1.0.2 versions are affected by this issue. Other OpenSSL releases are out of support and have not been checked. Fixed in OpenSSL 1.1.1i (Affected 1.1.1-1.1.1h). Fixed in OpenSSL 1.0.2x (Affected 1.0.2-1.0.2w). | MEDIUM | Dec 10, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-8285 | curl 7.21.0 to and including 7.73.0 is vulnerable to uncontrolled recursion due to a stack overflow issue in FTP wildcard match parsing. | MEDIUM | Dec 10, 2020 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-8284 | A malicious server can use the FTP PASV response to trick curl 7.73.0 and earlier into connecting back to a given IP address and port, and this way potentially make curl extract information about services that are otherwise private and not disclosed, for example doing port scanning and service banner extractions. | MEDIUM | Dec 10, 2020 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-29651 | A denial of service via regular expression in the py.path.svnwc component of py (aka python-py) through 1.9.0 could be used by attackers to cause a compute-time denial of service attack by supplying malicious input to the blame functionality. | MEDIUM | Dec 10, 2020 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-16592 | A use after free issue exists in the Binary File Descriptor (BFD) library (aka libbfd) in GNU Binutils 2.34 in bfd_hash_lookup, as demonstrated in nm-new, that can cause a denial of service via a crafted file. | MEDIUM | Dec 10, 2020 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-8286 | curl 7.41.0 through 7.73.0 is vulnerable to an improper check for certificate revocation due to insufficient verification of the OCSP response. | MEDIUM | Dec 10, 2020 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-25692 | A NULL pointer dereference was found in OpenLDAP server and was fixed in openldap 2.4.55, during a request for renaming RDNs. An unauthenticated attacker could remotely crash the slapd process by sending a specially crafted request, causing a Denial of Service. | MEDIUM | Dec 8, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-29573 | sysdeps/i386/ldbl2mpn.c in the GNU C Library (aka glibc or libc6) before 2.23 on x86 targets has a stack-based buffer overflow if the input to any of the printf family of functions is an 80-bit long double with a non-canonical bit pattern, as seen when passing a \\x00\\x04\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x04 value to sprintf. NOTE: the issue does not affect glibc by default in 2016 or later (i.e., 2.23 or later) because of commits made in 2015 for inlining of C99 math functions through use of GCC built-ins. In other words, the reference to 2.23 is intentional despite the mention of Fixed for glibc 2.33 in the 26649 reference. | MEDIUM | Dec 7, 2020 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-27786 | A flaw was found in the Linux kernel’s implementation of MIDI, where an attacker with a local account and the permissions to issue ioctl commands to midi devices could trigger a use-after-free issue. A write to this specific memory while freed and before use causes the flow of execution to change and possibly allow for memory corruption or privilege escalation. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. | HIGH | Dec 7, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-28916 | hw/net/e1000e_core.c in QEMU 5.0.0 has an infinite loop via an RX descriptor with a NULL buffer address. | LOW | Dec 4, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-29562 | The iconv function in the GNU C Library (aka glibc or libc6) 2.30 to 2.32, when converting UCS4 text containing an irreversible character, fails an assertion in the code path and aborts the program, potentially resulting in a denial of service. | MEDIUM | Dec 4, 2020 | 10.18.44.22 (Wind River Linux LTS 18) |
| CVE-2020-14351 | A flaw was found in the Linux kernel. A use-after-free memory flaw was found in the perf subsystem allowing a local attacker with permission to monitor perf events to corrupt memory and possibly escalate privileges. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability. | MEDIUM | Dec 3, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-14381 | A flaw was found in the Linux kernel’s futex implementation. This flaw allows a local attacker to corrupt system memory or escalate their privileges when creating a futex on a filesystem that is about to be unmounted. The highest threat from this vulnerability is to confidentiality, integrity, as well as system availability. | MEDIUM | Dec 3, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
| CVE-2020-25624 | hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host controller driver. | MEDIUM | Dec 3, 2020 | 10.18.44.21 (Wind River Linux LTS 18) |
