Not to be fixed
Created: Dec 6, 2016
Updated: Mar 6, 2019
Resolved Date: Feb 20, 2019
Found In Version: unknown
Severity: Standard
Applicable for: Wind River Linux 9
Component/s: BSP
nxp-ls10xx: README should include how to deploy rootfs image into MTD partition. Teh MTD layout is as following:
TWR-LS1021A-PB
root@nxp-ls10xx:/opt/wr-test# cat /proc/mtd
dev: size erasesize name
mtd0: 00020000 00020000 "NOR bank0 RCW Image"
mtd1: 00100000 00020000 "NOR bank0 u-boot Image"
mtd2: 00100000 00020000 "NOR bank0 DTB Image"
mtd3: 00700000 00020000 "NOR bank0 Linux Kernel Image"
mtd4: 03600000 00020000 "NOR bank0 Ramdisk Root File System Image"
mtd5: 00020000 00020000 "NOR bank4 RCW Image"
mtd6: 00100000 00020000 "NOR bank4 u-boot Image"
mtd7: 00100000 00020000 "NOR bank4 DTB Image"
mtd8: 00700000 00020000 "NOR bank4 Linux Kernel Image"
mtd9: 03600000 00020000 "NOR bank4 Ramdisk Root File System Image"
IOT-LS1021A-RevB3
# cat /proc/mtd
dev: size erasesize name
mtd0: 00100000 00040000 "rcw, u-boot"
mtd1: 00040000 00040000 "env"
mtd2: 03e00000 00040000 "rootfs"
setup.sh --machines nxp-ls10xx --kernel preempt-rt
. ./environment-setup-x86_64-wrlinuxsdk-linux && . ./oe-init-build-env build_test
bitbake wrlinux-image-glibc-std
