Not to be fixed
Created: Nov 15, 2016
Updated: Mar 6, 2019
Resolved Date: Feb 19, 2019
Found In Version: unknown
Severity: Standard
Applicable for: Wind River Linux 9
Component/s: BSP
root@fsl-ls1021a:/opt/wr-test/testcases/bts/bootcheck_error# cat /opt/wr-test/original_status/dmesg.log | grep -E -v "Error: CVMX_LMC0_INT1" | grep -i -B10 -A10 'ERROR' || return 0
[ 0.698633] neon : 1209.200 MB/sec
[ 0.698642] xor: using function: arm4regs (1239.200 MB/sec)
[ 0.698662] pinctrl core: initialized pinctrl subsystem
[ 0.705313] NET: Registered protocol family 16
[ 0.706076] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.758802] cpuidle: using governor ladder
[ 0.780464] irq: no irq domain found for /soc/uqe@2400000/qeic@80 !
[ 0.781294] irq: no irq domain found for /soc/uqe@2400000/qeic@80 !
[ 0.809151] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.809164] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.809281] register e1000-wakeup irq error, ret = -22
[ 1.089519] raid6: int32x1 gen() 181 MB/s
[ 1.259755] raid6: int32x1 xor() 161 MB/s
[ 1.429889] raid6: int32x2 gen() 215 MB/s
[ 1.600108] raid6: int32x2 xor() 172 MB/s
[ 1.770460] raid6: int32x4 gen() 205 MB/s
[ 1.940608] raid6: int32x4 xor() 170 MB/s
[ 2.110839] raid6: int32x8 gen() 207 MB/s
[ 2.280994] raid6: int32x8 xor() 142 MB/s
[ 2.451151] raid6: neonx1 gen() 502 MB/s
[ 2.621300] raid6: neonx1 xor() 361 MB/s
--
[ 4.412634] pci 0001:00:00.0: PME# supported from D0 D1 D2 D3hot
[ 4.414718] PCI: bus0: Fast back to back transfers disabled
[ 4.415656] PCI: bus1: Fast back to back transfers enabled
[ 4.415803] pci 0001:00:00.0: BAR 1: assigned [mem 0x4840000000-0x4843ffffff]
[ 4.415821] pci 0001:00:00.0: BAR 0: assigned [mem 0x4844000000-0x4844ffffff]
[ 4.415837] pci 0001:00:00.0: BAR 6: assigned [mem 0x4845000000-0x4845ffffff pref]
[ 4.415859] pci 0001:00:00.0: PCI bridge to [bus 01]
[ 4.418518] pcieport 0001:00:00.0: Signaling PME through PCIe PME interrupt
[ 4.418537] pcie_pme 0001:00:00.0:pcie001: service driver pcie_pme loaded
[ 4.419779] aer 0001:00:00.0:pcie002: service driver aer loaded
[ 4.422162] sii902x: probe of 0-0039 failed with error -1
[ 4.436594] Console: switching to colour frame buffer device 80x30
[ 4.441897] fb0: fb device registered successfully.
[ 4.443775] fb1: fb device registered successfully.
[ 4.445512] fb2: fb device registered successfully.
[ 4.447226] fb3: fb device registered successfully.
[ 4.449011] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 4.460349] console [ttyS0] disabled
[ 4.460520] 21c0500.serial: ttyS0 at MMIO 0x21c0500 (irq = 30, base_baud = 9375000) is a 16550A
[ 5.213673] console [ttyS0] enabled
[ 5.219410] 2950000.serial: ttyLP0 at MMIO 0x2950000 (irq = 36, base_baud = 6250000) is a FSL_LPUART
####################################################################################################################################
Test case Author: lei.yang
------------------
Project Build Path:
------------------
pek-lpgtest16.wrs.com.wrs.com:/buildarea1/xdong/bts_rt_fsl-10xx/build_test
To Get The Testing Layer:
------------------------
# git clone git://git.wrs.com/git/projects/wassp-repos/testcases/wrlinux
# cd wrlinux;git checkout master
Project Build:
----------------------
--machine nxp-ls10xx --distros wrlinux --kernel preempt-rt --base-url git://pek-git.wrs.com --dl-layers
Build Steps:
. environment-setup-x86_64-wrlinuxsdk-linux
. oe-init-build-env
Add BTS layer
1.bitbake-layers add-layer <path to wr-testing/bts-dev>
2.echo 'require templates/feature/bts/template.conf' >> conf/local.conf
3.bitbake wrlinux-image-glibc-std
Build Configuration:
----------------------------
BB_VERSION = '1.32.0'
BUILD_SYS = 'x86_64-linux'
NATIVELSBSTRING = 'CentOSLinux-7.2.1511'
DISTRO = 'wrlinux'
DISTRO_VERSION = '9.0.0.0'
MACHINE = 'nxp-ls10xx'
DEFAULTTUNE = 'cortexa7thf-neon'
TARGET_SYS = 'arm-wrs-linux-gnueabi'
TUNE_FEATURES = 'arm armv7ve vfp thumb neon callconvention-hard cortexa7'
TARGET_FPU = 'hard'
wr-base = 'HEAD:b71f5c5f285ecb0f6dc587c7adbad20a8f6607a3'
wr-fixes = 'HEAD:86020b2b2b961e3bb447b54184e817ac131eb7a9'
wrlinux = 'HEAD:b485c957b544009534a21e7a8352fca8374f415b'
nxp-ls10xx = 'HEAD:8242929b25b9c76f456030c0c71e9f6b586714cf'
meta = 'HEAD:1aa70d0598b436493dc2769d9186ea81f47474c7'
meta-initramfs
meta-python
meta-networking
meta-oe
meta-perl
meta-webserver = 'HEAD:a1e73d51d6f054f32850184d272b90805d0e7d36'
wr-template = 'HEAD:d1f165f234f11376a31b99ec2aaef4843d9c6ded'
wr-kernel = 'HEAD:c9637574278cb02b6880e2944f595b3093203c26'
meta-filesystems = 'HEAD:a1e73d51d6f054f32850184d272b90805d0e7d36'
meta-realtime
meta-virtualization = 'HEAD:c9637574278cb02b6880e2944f595b3093203c26'
wr-base-dl = 'HEAD:aa1eab16a8c351551912bc3b20a3d41896036cbc'
oe-core-dl-2.2 = 'HEAD:c4e4e415289e6bee73aebc12a68b0feb7609bd93'
meta-initramfs-dl-2.2 = 'HEAD:1347989107c2f97644b18d862f850fd4dc0e104e'
meta-python-dl-2.2 = 'HEAD:b7397cb44fb80d3a19b6ef92f4a44de7ffddf53c'
meta-networking-dl-2.2 = 'HEAD:39bd9c511d73eaaba0ab150c65058c0ba563f8e0'
meta-oe-dl-2.2 = 'HEAD:c50834ba0473b121f124040e254ed9a7eeeb826e'
meta-perl-dl-2.2 = 'HEAD:4d65c8cf72a198d849104cd3f213b6f3777f7431'
meta-webserver-dl-2.2 = 'HEAD:ec10bc34d57bd4f8f1a8ff4d6fff993d45c754a0'
wr-kernel-dl = 'HEAD:f9d20574ab2f63288ecdca850573e0d372577e36'
meta-filesystems-dl-2.2 = 'HEAD:ffa26ce28c1a1ddd181aedc6dbc95c2b539f35a4'
local = 'master:7c022130c8ef130530dc3baf02a96c7dd1095ea6'
bts-dev = 'master:b79d619ec11b229521940d6e1e1e9a3331bc3322'
Kernel source top 10 commits:
----------------------------
Yang Shi 48ec55c locktorture: Fix potential memory leak with rw lock test Mon Nov 14 12:39:59 2016 -0800
Xulin Sun 66d2fcf pci: pci-layerscape-ep-debugfs: fix truncation warning Thu Nov 10 21:46:43 2016 +0000
Alison Wang 0bf4126 arm: ls1021a: add platform notifier for dma-coherent requirement Thu Nov 10 21:46:35 2016 +0000
Xulin Sun e7e4f47 Revert 'ARM: ls1021a: Add dma-coherent property for eTSEC nodes' Thu Nov 10 21:46:28 2016 +0000
Pengyu Ma 93823e5 Force PCI BAR memory resource within 32-bit address on x86-32 arch Thu Nov 10 21:44:25 2016 +0000
Waiman Long 5c8700a x86/hpet: Reduce HPET counter read contention Wed Nov 9 16:33:10 2016 -0800
Yang Shi 05358ac nfs4: Restore the original errno for version check Wed Nov 9 16:29:43 2016 -0800
Kevin Hao 825e8bf memblock: change the annotation to __init_memblock for memblock_is_reserved() Tue Nov 8 13:59:11 2016 -0800
yzhu1 0c2d330 ipv4: net namespace does not inherit network configurations Mon Nov 7 17:24:53 2016 -0800
Paul Gortmaker 8ab1ff2 cryptodev: stomp dynamic version numbering for in tree builds Mon Nov 7 09:36:41 2016 -0800
Kernel config enabled by the testing layer:
------------------------------------------
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=5000
CONFIG_IOSCHED_BFQ=y
CONFIG_MTD_TESTS=m
CONFIG_DMATEST=m
CONFIG_IOSCHED_BFQ=y
CONFIG_MTD_TESTS=m
Kernel Boot Parameter:
---------------------
root@fsl-ls1021a:/opt/wr-test/testcases/bts/bootcheck_error# cat /proc/cmdline
console=ttyS0,115200 root=/dev/nfs rw nfsroot=128.224.165.20:/export/pxeboot/vlm-boards/24677/rootfs,nfsvers=3,tcp,nolock ip=128.224.179.132:128.224.165.20:128.224.178.1:255.255.254.0:fsl-ls1021a:eth1:off selinux=0 enforcing=0
To reproduce it:
---------------
# /opt/wr-test/testcases/bts/bootcheck_error/runtest.sh
=============
Extra Info:
=============
