Not to be fixed
Created: Apr 16, 2013
Updated: Feb 23, 2018
Resolved Date: Feb 22, 2018
Previous ID: LIN5-5568, LIN6-3099
Found In Version: 6.0
Severity: Standard
Applicable for: Wind River Linux 6
Component/s: BSP - Async
We hope we can see the following similar info in README.hardware
There are two USB ports: USB1 and USB2 on the boards.
The 2nd USB controller(For USB2 port) of the P1020 is muxed with the
local bus and is therefore only useable when the local bus is not used
or is idle. So, by default, USB2 port is not supported.
For USB1 port, with the default dts files, the USB controller works in
host mode. To let it work in gadget mode, this line must be added into
the usb node of the dts files: dr_mode = "peripheral";
No
1) build project
2) cat READMES/9-README.hardware