Fixed
Created: Mar 10, 2023
Updated: Apr 19, 2023
Resolved Date: Apr 19, 2023
Found In Version: 10.22.33.5
Fix Version: 10.22.33.8
Severity: Standard
Applicable for: Wind River Linux LTS 22
Component/s: BSP
It failed to boot installer image with UEFI that no boot entry found.
NA
LTS22 RCPL0005.
$ git clone --branch WRLINUX_10_22_LTS_RCPL0005
[https://gateway.delivers.windriver.com/git/linux-lts/release/wrlinux-lts.22/WRLinux-lts-22-Core/wrlinux-x]
*Project configuration:*
$ ./wrlinux-x/setup.sh -machines=intel-x86-64 distros=wrlinux-ovp --dl-layers -layers=meta-anaconda --templates=feature/installer-support
*-> Build target:*
. ./environment-setup-x86_64-wrlinuxsdk-linux
. ./oe-init-build-env build-target
-> vi conf/local.conf
DISTRO = "wrlinux-ovp"
PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-rt"
-> bitbake wrlinux-image-ovp-kvm
$ cd ..
*-> Build installer:*
. ./environment-setup-x86_64-wrlinuxsdk-linux
. ./oe-init-build-env build-installer
-> vi conf/local.conf
DISTRO = 'wrlinux-installer'
INSTALLER_TARGET_BUILD = '../build-target/tmp-glibc/deploy/images/intel-x86-64/wrlinux-image-installer-intel-x86-64-20230309140233.rootfs.ext4'
INSTALLER_TARGET_IMAGE = "wrlinux-image-ovp-kvm"
INITRAMFS_MAXSIZE = "5000000"
-> bitbake wrlinux-image-installer
-> Flash this wrlinux-image-installer-intel-x86-64.iso image into USB stick (Use USB stick with more than 16GB storage), assuming that USB is mounted at partition /dev/sdX, use appropriate values as per your machine.
$ sudo dd if=wrlinux-image-installer-intel-x86-64-20230214053644.iso of=/dev/sdX status=progress
$ sync
3) Plug this USB stick into usb port on vlm board #{*}29208{*} and boot it over usb drive. Note, you need to connect monitor/display to this board to view console messages.
