Not to be fixed
Created: Aug 13, 2022
Updated: Jun 18, 2023
Resolved Date: Jun 18, 2023
Found In Version: 10.22.33.1
Severity: Standard
Applicable for: Wind River Linux LTS 22
Component/s: BSP
This is a known issue of spi flash only on S32G399AEVB board, when access the AHB buffer of the flash, the call trace will show. Waiting for vendor's reply.
/lpg-build/cdc/fast_prod/WRLINUX_MASTER_WR/MASTER_WR_GIT/wrlinux-10/setup.sh --machines nxp-s32g --templates feature/docker --distros wrlinux --dl-layers --accept-eula=yes
source environment-setup-x86_64-wrlinuxsdk-linux
source oe-init-build-env build_BTS_nxp-s32g_standard_std_wrlinux_default
cd /buildarea1/common/WRLINUX_MASTER_WR/build_dir/GIT_202207/lxbuilds/prj_204648/wrlinux/build_BTS_nxp-s32g_standard_std_wrlinux_default
echo KERNEL_FEATURES:append = \" features/usb/serial-all.scc\" >> conf/local.conf
echo KERNEL_VERSION_SANITY_SKIP=\"1\" >> conf/local.conf
echo IMAGE_FSTYPES += \" tar.bz2\" >> conf/local.conf
echo BB_NUMBER_THREADS ?= \"24\" >> conf/local.conf
echo PARALLEL_MAKE ?= \"-j 24\" >> conf/local.conf
echo BB_DANGLINGAPPENDS_WARNONLY = \"1\" >> conf/local.conf
echo HSE_LOCAL_FIRMWARE_DIR = \"/folk/wgao/s32g/firmware/hse/\" >> conf/local.conf
echo HSE_FW_NAME_S32G2 = \"s32g2xx_hse_fw_0.1.0_1.0.0_pb211015.bin.pink\" >> conf/local.conf
echo IPCF_M7_APP_BIN_DIR = \"/folk/wgao/s32g/firmware/ipcf\" >> conf/local.conf
echo IMAGE_INSTALL:append = \" ipc-shm\" >> conf/local.conf
echo LLCE_LOCAL_FIRMWARE_DIR = \"/folk/wgao/s32g/firmware/llce/s32g2\" >> conf/local.conf
echo LLCE_LOCAL_FIRMWARE_DIR_S32G3 = \"/folk/wgao/s32g/firmware/llce/s32g3\" >> conf/local.conf
echo WRL_RECIPES:wr-nxp-s32g += \"llce\" >> conf/local.conf
echo IMAGE_INSTALL:append:nxp-s32g = \" llce\" >> conf/local.conf
bitbake-layers add-layer /net/pek-lpgtest7408/buildarea1/wgao/wrlinux_master/wr-testing/bts-dev
echo require templates/feature/bts/template.conf >> conf/local.conf
bitbake wrlinux-image-std
Boot on NXP EVB Gen3 board.
/opt/wr-test/main_test.py -k storage_bonnie:"USB2"
