Wind River Support Network

Not to be fixed

LIN1021-75 : nxp-s32g2xx: eth0 report fail message when ifconfig down the interface

Created: May 17, 2021    Updated: Mar 20, 2022
Resolved Date: Mar 20, 2022
Found In Version:
Severity: Standard
Applicable for: Wind River Linux LTS 21
Component/s: BSP

Description --machines nxp-s32g2xx --templates feature/docker --distros wrlinux --dl-layers --accept-eula=yes

bitbake wrlinux-image-std

Using the output WIC image to bootup the board, using "ifconfig eth0 down" to close the

eth0 interface, then the following fail message will show:

s32cc-dwmac 4033c000.ethernet eth0: Timeout accessing MAC_VLAN_Tag_Filter
s32cc-dwmac 4033c000.ethernet eth0: failed to kill vid 0081/0

Steps to Reproduce

/lpg-build/cdc/fast_prod/WRLINUX_MASTER_WR/MASTER_WR_GIT/wrlinux-10/ --machines nxp-s32g2xx --templates feature/docker --distros wrlinux --dl-layers --accept-eula=yes
source environment-setup-x86_64-wrlinuxsdk-linux
source oe-init-build-env build_wrlinux_pfe
echo KERNEL_FEATURES_append = \" features/usb/serial-all.scc\" >> conf/local.conf
echo KERNEL_VERSION_SANITY_SKIP=\"1\" >> conf/local.conf
echo IMAGE_FSTYPES += \" tar.bz2\" >> conf/local.conf
echo BB_NUMBER_THREADS ?= \"24\" >> conf/local.conf
echo PARALLEL_MAKE ?= \"-j 24\" >> conf/local.conf
echo BB_DANGLINGAPPENDS_WARNONLY = \"1\" >> conf/local.conf
echo IMAGE_INSTALL_append_nxp-s32g2xx = \" pfe\" >> conf/local.conf
echo PFE_LOCAL_FIRMWARE_DIR_CLASS_BIN = \"/folk/wgao/s32g/firmware/s32g_pfe_class.fw\" >> conf/local.conf
echo PFE_LOCAL_FIRMWARE_DIR_UTIL_BIN = \"/folk/wgao/s32g/firmware/s32g_pfe_util.fw\" >> conf/local.conf
bitbake wrlinux-image-std

Deploy wic image on MMC and boot on RDB2 board.
Live chat