Wind River Support Network

HomeDefectsLIN1021-54
Acknowledged

LIN1021-54 : [LTP] mkfs01_ext3_sh and mkfs01_ext4_sh tests failed

Created: May 17, 2021    Updated: Sep 27, 2021
Resolved Date: Aug 19, 2021
Found In Version: 10.21.20.1
Severity: Standard
Applicable for: Wind River Linux LTS 21
Component/s: BSP, Kernel

Description

/lpg-build/cdc/fast_prod/WRLINUX_MASTER_WR/MASTER_WR_GIT/wrlinux-10/setup.sh --machines=qemux86-64 ---templates feature/test feature/linux-yocto-dev feature/userspace-next feature/toolchain-next --distro wrlinux --accept-eula=yes --dl-layers

add ltp to image

bitbake wrlinux-image-glibc-std
 * Boot up the qemu BSP target

 * runqemu qemux86-64 slirp nographic ext4 kvm qemuparams="-m 16192 -smp cpus=12"

 * Run the following command

runltp -f commands

/opt/ltp/wrLinux_ltp/wr-runltp -f commands

 

…

<<<test_start>>>

tag=mkfs01_ext3_sh stime=1615942259

cmdline="mkfs01.sh -f ext3"

contacts=""

analysis=exit

<<<test_output>>>

[  270.398889] LTP: starting mkfs01_ext3_sh (mkfs01.sh -f ext3)

mkfs01 1 TINFO: timeout per run is 0h 5m 0s

tst_device.c:268: TINFO: Using test device LTP_DEV='/dev/loop0'

tst_device.c:305: TINFO: Skipping $LTP_DEV size 0MB, requested size 256MB

tst_device.c:88: TINFO: Found free device 0 '/dev/loop0'

mkfs01 1 TPASS: 'mkfs -t ext3  /dev/loop0 ' passed.

[  276.272063] EXT4-fs (loop0): mounting ext3 file system using the ext4 subsystem

[  276.283916] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)

[  276.284545] ext3 filesystem being mounted at /opt/ltp/wrLinux_ltp/tmpdir/ltp-lwFQHkBvqa/LTP_mkfs01.kwanf0dVMf/mntpoint supports timestamps until 2038 (0x7fffffff)

mkfs01 2 TFAIL: 'mkfs -t ext3  /dev/loop0 16000' failed, not expected.

mkfs01 3 TPASS: 'mkfs -t ext3 -c /dev/loop0 ' passed.

mkfs01 4 TPASS: 'mkfs -V   ' passed.

mkfs01 5 TPASS: 'mkfs -h   ' passed.

 

Summary:

passed   4

failed   1

skipped  0

warnings 0

<<<execution_status>>>

initiation_status="ok"

duration=13 termination_type=exited termination_id=1 corefile=no

cutime=415 cstime=569

<<<test_end>>>

<<<test_start>>>

tag=mkfs01_ext4_sh stime=1615942272

cmdline="mkfs01.sh -f ext4"

contacts=""

analysis=exit

<<<test_output>>>

[  283.687020] LTP: starting mkfs01_ext4_sh (mkfs01.sh -f ext4)

mkfs01 1 TINFO: timeout per run is 0h 5m 0s

tst_device.c:268: TINFO: Using test device LTP_DEV='/dev/loop0'

tst_device.c:305: TINFO: Skipping $LTP_DEV size 0MB, requested size 256MB

tst_device.c:88: TINFO: Found free device 0 '/dev/loop0'

mkfs01 1 TPASS: 'mkfs -t ext4  /dev/loop0 ' passed.

[  286.661788] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)

[  286.662712] ext4 filesystem being mounted at /opt/ltp/wrLinux_ltp/tmpdir/ltp-lwFQHkBvqa/LTP_mkfs01.sH8A5qsIBt/mntpoint supports timestamps until 2038 (0x7fffffff)

mkfs01 2 TFAIL: 'mkfs -t ext4  /dev/loop0 16000' failed, not expected.

mkfs01 3 TPASS: 'mkfs -t ext4 -c /dev/loop0 ' passed.

mkfs01 4 TPASS: 'mkfs -V   ' passed.

mkfs01 5 TPASS: 'mkfs -h   ' passed.

 

Summary:

passed   4

failed   1

skipped  0

warnings 0

<<<execution_status>>>

initiation_status="ok"

duration=8 termination_type=exited termination_id=1 corefile=no

cutime=307 cstime=303

<<<test_end>>>

…

This issue also existing on other BSPs (intel-x86-64, nxp-imx8, xilinx-zynqmp, marvell-cn96xx, bcm-2xxx-rpi4, and qemuarm64, etc.).

Steps to Reproduce

/lpg-build/cdc/fast_prod/WRLINUX_MASTER_WR/MASTER_WR_GIT/wrlinux-10/setup.sh --machines=qemux86-64 ---templates feature/test feature/linux-yocto-dev feature/userspace-next feature/toolchain-next --distro wrlinux --accept-eula=yes --dl-layers

bitbake-layers add-layer testcases/wrlinux/wr-testing/kts-dev

echo require templates/feature/ltp/template.conf >> conf/local.conf

bitbake wrlinux-image-glibc-std
 * Boot up the qemu BSP target

 * runqemu qemux86-64 slirp nographic ext4 kvm qemuparams="-m 16192 -smp cpus=12"

 * Run the following command

            /opt/ltp/wrLinux_ltp/wr-runltp -f commands
Live chat
Online