Not to be fixed
Created: Feb 24, 2016
Updated: Apr 28, 2018
Resolved Date: Apr 17, 2018
Found In Version: 8.0
Severity: Standard
Applicable for: Wind River Linux 8
Component/s: BSP
Start testcase kdump_smp_smp testing
------------[ cut here ]------------
WARNING: CPU: 10 PID: 49 at /buildarea1/wgao/intel/cgl/bitbake_build/tmp/work-shared/intel-x86-64/kernel-source/arch/x86/kernel/check.c:141 check_for_bios_corruption.part.1+0xba/0x110()
Memory corruption detected in low memory
Modules linked in:futex hash table entries: 16384 (order: 8, 1048576 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1456305740.113:1): initialized
CPU: 10 PID: 49 Comm: kworker/10:0 Not tainted 4.1.17-WR8.0.0.0_cgl #1
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
Hardware name: HP ProLiant DL380p Gen8, BIOS P70 02/10/2014
Workqueue: events check_corruption
ffffffff81eb4378 ffff88003e977cf8 ffffffff81a84630 0000000080000000
ffff88003e977d48 ffff88003e977d38 ffffffff810589aa ffff88000000fff8
0000000000000000 ffff880000010000 ffffffff823b2110 0000000000000001
Call Trace:
[<ffffffff81a84630>] dump_stack+0x4f/0x7b
[<ffffffff810589aa>] warn_slowpath_common+0x8a/0xc0
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[<ffffffff81058a26>] warn_slowpath_fmt+0x46/0x50
[<ffffffff810487fa>] check_for_bios_corruption.part.1+0xba/0x110
[<ffffffff81048868>] check_corruption+0x18/0x50
[<ffffffff81070eab>] process_one_work+0x13b/0x480
[<ffffffff81071238>] worker_thread+0x48/0x4c0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
aufs 4.1-20150629
[<ffffffff810711f0>] ? process_one_work+0x480/0x480
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler bfq registered
BFQ I/O-scheduler: v7r8
[<ffffffff810770c9>] kthread+0xc9/0xe0
[<ffffffff81077000>] ? kthread_worker_fn+0x170/0x170
[<ffffffff81a8c5a2>] ret_from_fork+0x42/0x70
[<ffffffff81077000>] ? kthread_worker_fn+0x170/0x170
---[ end trace f1cdc4934c3f5457 ]---
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
[drm] Initialized drm 1.1.0 20060810
tsc: Refined TSC clocksource calibration: 2793.265 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x28436663839, max_idle_ns: 440795216983 ns
brd: module loaded
loop: module loaded
drbd: initialized. Version: 8.4.5 (api:1/proto:86-101)
drbd: built-in
drbd: registered as block device major 147
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x4000 ctl 0x4008 bmdma 0x4020 irq 17
ata2: SATA max UDMA/133 cmd 0x4010 ctl 0x4018 bmdma 0x4028 irq 17
tg3.c:v3.137 (May 11, 2014)
tg3 0000:03:00.0 eth0: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address 3c:4a:92:b2:2f:3c
tg3 0000:03:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:03:00.1 eth1: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address 3c:4a:92:b2:2f:3d
tg3 0000:03:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:03:00.2 eth2: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address 3c:4a:92:b2:2f:3e
tg3 0000:03:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.2 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
tg3 0000:03:00.3 eth3: Tigon3 [partno(629133-001) rev 5719001] (PCI Express) MAC address 3c:4a:92:b2:2f:3f
tg3 0000:03:00.3 eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.3 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.3 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
igb: Copyright (c) 2007-2014 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.0.1-k
ixgbe: Copyright (c) 1999-2014 Intel Corporation.
ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
ixgb: Copyright (c) 1999-2008 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 21, io mem 0xf6c60000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 20, io mem 0xf6c50000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
Switched to clocksource tsc
hub 2-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: PC Speaker as /devices/platform/pcspkr/input/input2
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one day, 114 bytes nvram, hpet irqs
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.9.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
usbcore: registered new interface driver btusb
Intel P-state driver initializing.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using NMI interrupt.
u32 classifier
Actions configured
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
l2tp_core: L2TP core driver, V2.0
Key type dns_resolver registered
registered taskstats version 1
kmemleak: Kernel memory leak detector initialized
kmemleak: Automatic memory scanning thread started
Btrfs loaded
console [netcon0] enabled
netconsole: network logging started
rtc_cmos 00:03: setting system clock to 2016-02-24 09:22:23 UTC (1456305743)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
usb 2-1.3: new high-speed USB device number 3 using ehci-pci
ata1.01: failed to resume link (SControl 0)
IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 4 SControl 0)
ata2.01: failed to resume link (SControl 0)
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 2 ports detected
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 4 SControl 0)
usb 2-1.3.1: new high-speed USB device number 4 using ehci-pci
usb-storage 2-1.3.1:1.0: USB Mass Storage device detected
scsi host2: usb-storage 2-1.3.1:1.0
scsi 2:0:0:0: Direct-Access HP iLO Internal SD-CARD 2.09 PQ: 0 ANSI: 0
sd 2:0:0:0: [sda] 15572992 512-byte logical blocks: (7.97 GB/7.42 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] No Caching mode page found
sd 2:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex
cfg80211: Calling CRDA to update world regulatory domain
tg3 0000:03:00.0 eth0: Flow control is off for TX and off for RX
Sending DHCP requests .
tg3 0000:03:00.0 eth0: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
cfg80211: Calling CRDA to update world regulatory domain
., OK
IP-Config: Got DHCP answer from 128.224.178.20, my address is 128.224.179.72
IP-Config: Complete:
device=eth0, hwaddr=3c:4a:92:b2:2f:3c, ipaddr=128.224.179.72, mask=255.255.254.0, gw=128.224.178.1
host=hp_dl380p, domain=pek-tuxlab.wrs.com, nis-domain=(none)
bootserver=128.224.165.20, rootserver=128.224.165.20, rootpath=
nameserver0=128.224.160.11, nameserver1=147.11.100.30, nameserver2=147.11.1.11
ALSA device list:
No soundcards found.
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
VFS: Mounted root (nfs filesystem) on device 0:18.
devtmpfs: mounted
Freeing unused kernel memory: 2208K (ffffffff82146000 - ffffffff8236e000)
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 1456K (ffff880043094000 - ffff880043200000)
Freeing unused kernel memory: 176K (ffff8800435d4000 - ffff880043600000)
audit: type=1403 audit(1456305752.859:2): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 1.142355s.
systemd[1]: Relabelled /dev and /run in 74.351ms.
random: systemd urandom read with 44 bits of entropy available
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
Welcome to Wind River Linux CGP 8.0.0.0!
systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
systemd[1]: Reached target Swap.
[ OK ] Reached target Swap.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Created slice Root Slice.
[ OK ] Created slice Root Slice.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
systemd[1]: Created slice System Slice.
[ OK ] Created slice System Slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice system-getty.slice.
[ OK ] Created slice system-getty.slice.
systemd[1]: Reached target Slices.
[ OK ] Reached target Slices.
systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
systemd[1]: Mounting Debug File System...
Mounting Debug File Syssoftdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
cfg80211: Calling CRDA to update world regulatory domain
tem...
systemd[1]: Starting LSB: Set hostname based on /etc/hostname...
Starting LSB: Set hostname based on /etc/hostname...
systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required st... nodes for the current kernel...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Paths.
[ OK ] Reached target Paths.
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting Temporary Directory...
Mounting Temporary Directory...
systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
systemd[1]: Listening on networkd rtnetlink socket.
[ OK ] Listening on networkd rtnetlink socket.
audit: type=1400 audit(1456305753.719:3): avc: denied { audit_read } for pid=1 comm="systemd" capability=37 scontext=system_u:system_r:kernel_t:s15:c0.c1023 tcontext=system_u:system_r:kernel_t:s15:c0.c1023 tclass=capability2 permissive=1
systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
systemd[1]: Starting Journal Service...
Starting Journal Service...
systemd[1]: Starting Setup Virtual Console...
Starting Setup Virtual Console...
systemd[1]: Mounted Temporary Directory.
[ OK ] Mounted Temporary Directory.
systemd[1]: Mounted Debug File System.
[ OK ] Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
[ OK ] Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
[ OK ] Mounted Huge Pages File System.
systemd[1]: Started Load Kernel Modules.
[ OK ] Started Load Kernel Modules.
audit: type=1130 audit(1456305753.836:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s15:c0.c1023 msg='unit=systemd-modules-load comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started LSB: Set hostname based on /etc/hostname.
[ OK ] Started LSB: Set hostname based on /etc/hostname.
audit: type=1130 audit(1456305753.875:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s15:c0.c1023 msg='unit=hostname comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Remount Root and Kernel File Systems.
[ OK ] Started Remount Root and Kernel File Systems.
audit: type=1130 audit(1456305753.913:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s15:c0.c1023 msg='unit=systemd-remount-fs comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Create list of required static device nodes for the current kernel.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
audit: type=1130 audit(1456305753.956:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s15:c0.c1023 msg='unit=kmod-static-nodes comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Setup Virtual Console.
[ OK ] Started Setup Virtual Console.
audit: type=1130 audit(1456305753.992:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s15:c0.c1023 msg='unit=systemd-vconsole-setup comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
audit: type=1130 audit(1456305754.025:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s15:c0.c1023 msg='unit=systemd-journald comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
Starting Flush Journal to Persistent Storage...
Starting Create Static Device Nodes in /dev...
Starting udev Coldplug all Devices...
Starting Apply Kernel Variables...
audit: type=1107 audit(1456305754.118:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s15:c0.c1023 msg='avc: denied { stop } for auid=n/a uid=0 gid=0 path="/lib/systemd/system/systemd-journald.service" cmdline="/bin/journalctl --flush" scontext=system_u:system_r:kernel_t:s15:c0.c1023 tcontext=system_u:object_r:nfs_t:s0 tclass=service
exe="/lib/systemd/systemd" sauid=0 hostname=? addr=? terminal=?'
systemd-journald[380]: Received request to flush runtime journal from PID 1
[ OK ] Started Create Static Device Nodes in /dev.
audit: type=1130 audit(1456305754.176:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:kernel_t:s15:c0.c1023 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started Apply Kernel Variables.
[ OK ] Reached target Local File Systems (Pre).
Mounting /var/volatile...
Mounting /mnt/huge...
Starting udev Kernel Device Manager...
[ OK ] Mounted /var/volatile.
[ OK ] Mounted /mnt/huge.
[ OK ] Reached target Local File Systems.
Starting Relabel all filesystems, if necessary...
Starting Create Volatile Files and Directories...
Starting Load/Save Random Seed...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started udev Kernel Device Manager.
Checking SELinux security contexts:
[ OK ] Started Create Volatile Files and Directories.
* SELinux requires the root '/' filesystem support extended
filesystem attributes (XATTRs). It does not appear that this
filesystem has extended attribute support or it is not enabled.
- To continue using SELinux you will need to enable extended
attribute support on the root device.
- To disable SELinux, please add "selinux=0" in the kernel
command line.
Starting Network Time Synchronization...
- This system is using NFS root filesystem, so enforcing mode will
be disabled for users to continue to use this system.
But, you should *NOT* use NFS root filesystem with SELinux in your
production machines.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Synchronized.
[ OK ] Started Relabel all filesystems, if necessary.
Starting Security Auditing Service...
[ OK ] Started Security Auditing Service.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
ipmi message handler version 39.2
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
dca service started, version 1.12.1
ipmi_si IPI0001:00: ipmi_si: probing via ACPI
ipmi_si IPI0001:00: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 2 spacing 2 irq 0
ioatdma: Intel(R) QuickData Technology Driver 4.00
EDAC MC: Ver: 3.0.0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
HP HPSA Driver (v 3.4.10-120)
------------[ cut here ]------------
WARNING: CPU: 29 PID: 566 at /buildarea1/wgao/intel/cgl/bitbake_build/tmp/work-shared/intel-x86-64/kernel-source/drivers/pci/pci.c:1550 pci_disable_device+0xba/0xd0()
hpsa 0000:02:00.0: disabling already-disabled device
Modules linked in: be2net(+) hpsa(+) edac_core(+) hpilo(+) hpwdt(+) ioatdma(+) lpc_ich ata_generic dca thermal ipmi_si(+) ipmi_msghandler acpi_power_meter softdog
CPU: 29 PID: 566 Comm: systemd-udevd Tainted: G W 4.1.17-WR8.0.0.0_cgl #1
Hardware name: HP ProLiant DL380p Gen8, BIOS P70 02/10/2014
ffffffff81efa950 ffff880024caf9d8 ffffffff81a84630 0000000080000000
ffff880024cafa28 ffff880024cafa18 ffffffff810589aa ffff880024cafa28
ffff88003e190000 ffff88003e16c000 0000000000891590 0000000000000001
Call Trace:
[<ffffffff81a84630>] dump_stack+0x4f/0x7b
[<ffffffff810589aa>] warn_slowpath_common+0x8a/0xc0
[<ffffffff81058a26>] warn_slowpath_fmt+0x46/0x50
[<ffffffff8148ce1f>] ? pci_bus_read_config_word+0x8f/0xa0
[<ffffffff81495afa>] pci_disable_device+0xba/0xd0
[<ffffffffa015d786>] hpsa_init_one+0x516/0x20e0 [hpsa]
[<ffffffff811b761d>] ? delete_object_full+0x2d/0x40
[<ffffffff8107f270>] ? preempt_count_add+0xa0/0xf0
[<ffffffff81a8b9f9>] ? _raw_spin_unlock_irqrestore+0x19/0x40
[<ffffffff81498092>] local_pci_probe+0x42/0xa0
[<ffffffff81497fe5>] ? pci_match_device+0xe5/0x110
[<ffffffff814993d9>] pci_device_probe+0xe9/0x150
[<ffffffff81588b51>] driver_probe_device+0x181/0x310
[<ffffffff81588dbb>] __driver_attach+0x9b/0xa0
[<ffffffff81588d20>] ? __device_attach+0x40/0x40
[<ffffffff81586c6b>] bus_for_each_dev+0x6b/0xb0
[<ffffffff8158853e>] driver_attach+0x1e/0x20
[<ffffffff81588198>] bus_add_driver+0x178/0x230
[<ffffffffa01e9000>] ? 0xffffffffa01e9000
[<ffffffff815895e4>] driver_register+0x64/0xf0
[<ffffffff81497879>] __pci_register_driver+0x49/0x50
[<ffffffffa01e901e>] hpsa_init+0x1e/0x20 [hpsa]
[<ffffffff810003bc>] do_one_initcall+0x8c/0x1c0
[<ffffffff81a80fa8>] ? kmemleak_alloc+0x28/0x50
[<ffffffff811a40b2>] ? kmem_cache_alloc_trace+0x1f2/0x260
[<ffffffff81a828c1>] do_init_module+0x60/0x1c3
[<ffffffff810d738b>] load_module+0x1c3b/0x2240
[<ffffffff810d3f20>] ? store_uevent+0x40/0x40
[<ffffffff810d7b66>] SyS_finit_module+0x96/0xa0
[<ffffffff81a8c19b>] system_call_fastpath+0x16/0x6e
---[ end trace f1cdc4934c3f5459 ]---
hpsa 0000:02:00.0: using doorbell to reset controller
be2net 0000:0a:00.0: be2net version is 10.6.0.1
be2net 0000:0a:00.0: PCIe error reporting enabled
EDAC MC0: Giving out device to module sbridge_edac.c controller Ivy Bridge Socket#0: DEV 0000:1f:0e.0 (POLLED)
random: nonblocking pool is initialized
EDAC MC1: Giving out device to module sbridge_edac.c controller Ivy Bridge Socket#1: DEV 0000:3f:0e.0 (POLLED)
EDAC sbridge: Ver: 1.1.0
hpwdt 0000:01:00.0: HP Watchdog Timer Driver: NMI decoding initialized, allow kernel dump: ON (default = 1/ON)
hpwdt 0000:01:00.0: Unable to register miscdev on minor=130 (err=-16).
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
be2net 0000:0a:00.0: FW config: function_mode=0x10003, function_caps=0x7
be2net 0000:0a:00.0: Max: txqs 16, rxqs 17, rss 16, eqs 16, vfs 0
be2net 0000:0a:00.0: Max: uc-macs 30, mc-macs 64, vlans 64
be2net 0000:0a:00.0: enabled 8 MSI-x vector(s) for NIC
be2net 0000:0a:00.0: created 8 TX queue(s)
ipi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
be2net 0000:0a:00.0: created 9 RX queue(s)
[ OK ] Found device /dev/ttyS0.
be2net 0000:0a:00.0: FW version is 10.2.340.19
be2net 0000:0a:00.0: HW Flow control - TX:1 RX:1
[ OK ] Started udev Coldplug all Devices.
hpwdt: probe of 0000:01:00.0 failed with error -16
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
be2net 0000:0a:00.0: Emulex OneConnect(be3): PF port 1
be2net 0000:0a:00.1: be2net version is 10.6.0.1
be2net 0000:0a:00.1: PCIe error reporting enabled
ipmi_si IPI0001:00: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
ipmi_si IPI0001:00: IPMI kcs interface initialized
be2net 0000:0a:00.1: FW config: function_mode=0x10003, function_caps=0x7
be2net 0000:0a:00.1: Max: txqs 16, rxqs 17, rss 16, eqs 16, vfs 0
be2net 0000:0a:00.1: Max: uc-macs 30, mc-macs 64, vlans 64
be2net 0000:0a:00.1: enabled 8 MSI-x vector(s) for NIC
be2net 0000:0a:00.1: created 8 TX queue(s)
be2net 0000:0a:00.1: created 9 RX queue(s)
be2net 0000:0a:00.1: FW version is 10.2.340.19
be2net 0000:0a:00.1: HW Flow control - TX:1 RX:1
be2net 0000:0a:00.1: Emulex OneConnect(be3): PF port 2
[ OK ] Reached target System Initialization.
Starting Restore Sound Card State...
Starting sshd.socket.
[ OK ] Listening on sockets activating rrdcached.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target Timers.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on Rcfg80211: Calling CRDA to update world regulatory domain
PCbind Server Activation Socket.
[ OK ] Started Restore Sound Card State.
[ OK ] Listening on sshd.socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting Permit User Sessions...
Starting Apply Cpu Microcode...
Starting System Logging Service...
[ OK ] Started Periodic Command Scheduler.
[ OK ] Started irqbalance daemon.
[ OK ] Started strongSwan IPsec IKEv1/IKEv2 daemon using ipsec.conf.
[ OK ] Started Job spooling tools.
Starting watchdog daemon...
[ OK ] Started Data caching daemon for rrdtool.
Starting GNU Zebra routing manager...
Starting ACPI Event Daemon...
[ OK ] Started D-Bus System Message Bus.
Starting Network Service...
NET: Registered protocol family 15
Starting Login Service...
Starting (null)...
Starting Avahi mDNS/DNS-SD Stack...
[ OK ] Started System Logging Service.
[ OK ] Started Permit User Sessions.
[ OK ] Started Apply Cpu Microcode.
[ OK ] Started watchdog daemon.
[ OK ] Started ACPI Event Daemon.
[ OK ] Started Network Service.
[ OK ] Started Avahi mDNS/DNS-SD Stack.
[ OK ] Started Login Service.
Starting Wait for Network to be Configured...
[ OK ] Started Wait for Network to be Configured.
Initializing XFRM netlink socket
[ OK ] Started (null).
[ OK ] Started GNU Zebra routing manager.
Starting RIP routing daemon...
Starting RIP routing daemon for IPv6...
[ OK ] Reached target Network.
Starting Check tcf-agent autostart...
[ OK ] Started Vsftpd ftp daemon.
Starting /etc/rc.local Compatibility...
tcf-agent: not configured to autostart, use /etc/cafe/tcf-agent.init force-start
Starting Berkeley Internet Name Domain (DNS)...
[ OK ] Reached target Network is Online.
Starting Simple Network Management Protocol (SNMP) Daemon....
Starting Xinetd A Powerful Replacement For Inetd...
Starting Racoon IKEv1 key management daemon for IPSEC...
Starting Postfix Mail Transport Agent...
Starting Simple Network Management Protocol (SNMP) Trap Daemon....
Starting FreeRADIUS high performance RADIUS server....
Starting Network Time Service...
Starting Babel routing daemon...
Starting BGP routing daemon...
Starting OSPF routing daemon for IPv6...
Starting OSPF routing daemon...
Starting IS-IS routing daemon...
[ OK ] Started RIP routing daemon.
[ OK ] Started RIP routing daemon for IPv6.
[ OK ] Started Check tcf-agent autostart.
[ OK ] Started /etc/rc.local Compatibsha512_ssse3: Using AVX optimized SHA-512 implementation
ility.
[ OK ] Started Xinetd A Powerful Replacement For Inetd.
[ OK ] Started Racoon IKEv1 key management daemon for IPSEC.
[ OK ] Started Network Time Service.
[ OK ] Started Babel routing daemon.
[ OK ] Started BGP routing daemon.
[ OK ] Started OSPF routing daemon for IPv6.
[ OK ] Started OSPF routing daemon.
[ OK ] Started IS-IS routing daemon.
[ OK ] Started Simple Network Management Protocol (SNMP) Trap Daemon..
[ OK ] Started Simple Network Management Protocol (SNMP) Daemon..
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[ OK ] Started Berkeley Internet Name Domain (DNS).
[ OK ] Reached target Host and Network Name Lookups.
Starting LSB: network benchmark...
[ OK ] Started LSB: network benchmark.
[ OK ] Started FreeRADIUS high performance RADIUS server..
[ OK ] Started Postfix Mail Transport Agent.
[ OK ] Reached target Multi-User System.
Starting Update UTMP about System Runlevel Changes...
[ OK ] Started Update UTMP about System Runlevel Changes.
Wind River Linux CGP 8.0.0.0 hp_dl380p ttyS0
hp_dl380p login: cfg80211: Calling CRDA to update world regulatory domain
Wind River Linux CGP 8.0.0.0 hp_dl380p ttyS0
hp_dl380p login: root
Password: cfg80211: Calling CRDA to update world regulatory domain
hpsa 0000:02:00.0: board ready after hard reset.
hpsa 0000:02:00.0: Waiting for controller to respond to no-op
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA to update world regulatory domain
root@hp_dl380p:~# cat /proc/version
Linux version 4.1.17-WR8.0.0.0_cgl (wgao@pek-lpgtest15) (gcc version 5.2.0 (Wind River Linux CGP 5.2.0-8.0-intel-x86-64) ) #1 SMP PREEMPT Wed Feb 24 14:18:25 CST 2016
root@hp_dl380p:~#
root@hp_dl380p:~#
root@hp_dl380p:~# cat /proc/cmdline
intel_iommu=off reset_devices console=ttyS0,115200 root=/dev/nfs nfsroot=128.224.165.20:/export/pxeboot/vlm-boards/21966/rootfs rw ip=dhcp enforcing=0 mem=4G elfcorehdr=1113476K
End testcase kdump_smp_smp testing
------------------
Product update date(Spin):
------------------
spin=GIT_20160223
------------------
Project Build Path:
------------------
pek-lpgtest15.wrs.com:/buildarea1/wgao/intel/cgl
To Get The Testing Layer:
------------------------
# git clone git://git.wrs.com/git/projects/wassp-repos/testcases/wrlinux
# cd wrlinux;git checkout master
Project Configure Line:
----------------------
# Generated by wrlinux configure at 2016å¹´ 02æ?? 24æ?¥ æ??æ??ä¸? 14:01:26 CST
/lpg-build/cdc/fast_prod/wrlinux80/WRL80_GIT/wrlinux-8/wrlinux/configure --enable-board=intel-x86-64 --enable-kernel=cgl --enable-rootfs=glibc-cgl --with-layer=/lpg-build/cdc/WASSP_LINUX_80/testcases/wrlinux/wr-testing/bts-dev,wr-dpdk --with-template=feature/bts,feature/kexec,feature/kdump,feature/wr-hp-support --enable-jobs=16 --enable-parallel-pkgbuilds=16 --enable-reconfig=yes --with-rcpl-version=0
Build Configuration:
----------------------------
BB_VERSION = "1.28.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "RedHat-6"
DISTRO = "wrlinux-cgl"
DISTRO_VERSION = "8.0.0.0"
MACHINE = "intel-x86-64"
DEFAULTTUNE = "corei7-64"
TARGET_SYS = "x86_64-wrs-linux"
TUNE_FEATURES = "m64 corei7"
TARGET_FPU = ""
lib32: DEFAULTTUNE = "corei7-32"
lib32: TARGET_SYS = "i686-wrsmllib32-linux"
lib32: TUNE_FEATURES = "m32 corei7"
wrlinux = "WRLINUX_8_0_HEAD:9ae0b9da1ed1bdae507f18cb66de7a6e669719fb"
wrlcompat = "WRLINUX_8_0_HEAD:c8bdbd3bc8b8ed8e284178918870bd61da1389b8"
wr-sdk-toolchain = "WRLINUX_8_0_HEAD:7f1ebd9eb4887609f3336b998477a432d2146b81"
wr-tcwrappers = "WRLINUX_8_0_HEAD:6d4a369c118fd0035918d944bfdb3b939f67f46c"
meta = "wr-8.0-20151119:fbda8e47f21765cc1b6895841633b750e6a9d123"
oe-core-dl-2.0 = "WRLINUX_8_0_HEAD:c8de006dec1642a648a6d50efceba07a119ff2ac"
meta-downloads = "WRLINUX_8_0_HEAD:463ea060b42b14419f3f609ed1b5d2c0bb94a756"
wr-kernel = "WRLINUX_8_0_HEAD:d791b2f0a86cd69a896b645fc8bfb40d24ad1829"
intel-x86 = "WRLINUX_8_0_HEAD:cbebe67bbb1dae7acb50876fad325bc0c86140d4"
wr-base = "WRLINUX_8_0_HEAD:96b496ad82c26a4867593310cbeedbf105d8ca46"
wr-fixes = "WRLINUX_8_0_HEAD:de41a377cbb46992db298c26feceaeefa0b76109"
wr-tools-profile = "WRLINUX_8_0_HEAD:771bd4d24d65e17ba2ac52b38f482afec39da586"
wr-tools-debug = "WRLINUX_8_0_HEAD:b3361fc0bb65c164104cb60df1b1a9e62e34bd35"
meta-filesystems
meta-initramfs
meta-gnome
meta-multimedia
meta-networking
meta-oe
meta-python
meta-perl
meta-webserver
meta-xfce = "wr-8.0-20151119:83ac3b81f38506430af3398b26ab62e68c8e517a"
wr-prebuilts = "WRLINUX_8_0_HEAD:61fbe7ea17afa5323a47b728b92be93e35b18e68"
meta-selinux = "wr-8.0-20151119:327cd2202e18f55cf9f6f4f4ea485d2651e07d25"
wr-security = "WRLINUX_8_0_HEAD:026a5e59216893bc154d845fbebec8400277800d"
cgp = "WRLINUX_8_0_HEAD:cf30c7e19b78795d58093e0db494a2cac631590d"
common-downloads = "WRLINUX_8_0_HEAD:2896bccbc08b347fe6c6dffa0663320412d843c8"
bts-dev = "master:123007bdba3825b6cfdb0b7ec0087546f462e269"
wr-dpdk = "WRLINUX_8_0_HEAD:2abc6a93bd9c72c3b88b12145e0809638a7a89e3"
----------------------------------------------------------------------
Kernel source top 10 commits:
----------------------------
Jeff Kirsher 2b3ded3 e1000e: fix call to do_div() to use u64 arg Fri Feb 19 12:40:53 2016 +0800
Jianchuan Wang 13639f5 Livedump: Compile error for ppc64 Fri Feb 5 12:33:02 2016 +0800
Yue Tao 48a3775 Fix the merged issue Fri Feb 5 08:49:43 2016 +0800
Corey Minyard e78531e Live application coredump Thu Feb 4 15:14:15 2016 +0800
Corey Minyard 5eca648 Revert "kernel/fork.c: make dup_mm() static" Thu Feb 4 15:14:13 2016 +0800
David Howells bfc07ad crypto: pcomp - Constify (de)compression parameters Thu Feb 4 09:53:18 2016 +0800
David S. Miller 85500e9 iommu-common: Fix error code used in iommu_tbl_range_{alloc,free}(). Thu Feb 4 09:53:15 2016 +0800
chunguang yang 78b644f usb/serial: Fix build warning Tue Feb 2 17:59:00 2016 +0800
chunguang yang e47f496 scsi/mpt2sas: Fix build warning Tue Feb 2 17:58:57 2016 +0800
Li RongQing d92612e vxlan: fix a out of bounds access in __vxlan_find_mac Mon Feb 1 13:18:08 2016 +0800
Kernel config enabled by the testing layer:
------------------------------------------
CONFIG_DEBUG_KMEMLEAK=y
CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE=5000
CONFIG_IOSCHED_BFQ=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_DMATEST=m
CONFIG_USB_SERIAL_PL2303=y
CONFIG_CMA_DEBUG=y
CONFIG_UIO_PCI_GENERIC=m
Follow below commands and reference logs
Test case run commands :
['echo $EXPECT', ['EP_x86-64_1', 'EP_PowerPC_1', 'EP_MIPS64_1', 'EP_x86-64_1'], 20, 'target']
["nfsre=$(cat /proc/cmdline|sed 's/.*nfsroot=//g' |sed 's/rootfs.*//g') && echo $EXPECT", ['EP_x86-64_1', 'EP_x86-64_1'], 20, 'EP_x86-64_1']
['echo $nfsre && echo $EXPECT', ['EP_x86-64_1', 'EP_x86-64_1'], 20, 'EP_x86-64_1']
['mount -o nolock $nfsre /mnt && echo $EXPECT', ['EP_x86-64_1', 'EP_x86-64_1'], 20, 'EP_x86-64_1']
["sed -i 's/console/crashkernel=1024M@64M console/g' /mnt/*pxe*.cfg && echo $EXPECT", ['EP_x86-64_1', 'EP_x86-64_1'], 20, 'EP_x86-64_1']
['umount /mnt && echo $EXPECT', ['EP_x86-64_1', 'EP_x86-64_1'], 20, 'EP_x86-64_1']
['reboot -f', ['Hit any key to stop autoboot', 'Octeon ebb', 'TFTP from server', 'login:', 'Login:', 'login:'], 600, 'target']
['echo 1 > /proc/sys/kernel/sysrq', ['@', '@'], 20, 'target']
['cat /proc/version', ['Linux version', 'Wind River Linux', 'Wind River Linux'], 20, 'target']
['cat /proc/cpuinfo', ['system type', 'machine', 'processor', 'processor'], 20, 'target']
['cat /proc/iomem', ['System RAM', 'System RAM'], 20, 'target']
['cat /proc/cmdline', ['@', '@'], 20, 'target']
['file $(which kexec) > src && for i in x86-64 PowerPC MIPS64; do grep -i $i src && EXPECT=EP_${i}_2; done', ['@', '@'], 20, 'target']
['echo $EXPECT', ['EP_x86-64_2', 'EP_PowerPC_2', 'EP_MIPS64_2', 'EP_x86-64_2'], 20, 'target']
['cp /boot/bzImage /boot/kernel_kdump && echo $EXPECT', ['EP_x86-64_2', 'EP_x86-64_2'], 60, 'EP_x86-64_2']
['cat /proc/cmdline > args && cat args && echo $EXPECT', ['EP_x86-64_2', 'EP_x86-64_2'], 20, 'EP_x86-64_2']
["sed -i 's/crashkernel=1024M@64M/intel_iommu=off/g' args && cat args && echo $EXPECT", ['EP_x86-64_2', 'EP_x86-64_2'], 20, 'EP_x86-64_2']
["sed -i 's/console/reset_devices console/g' args && cat args && echo $EXPECT", ['EP_x86-64_2', 'EP_x86-64_2'], 20, 'EP_x86-64_2']
['kexec -p /boot/kernel_kdump --append="`cat args`" && echo PASS', ['PASS', 'PASS'], 20, 'target']
["echo 'c' > /proc/sysrq-trigger", ['login:', 'Login:', 'login:'], 1200, 'target']
['cat /proc/version', ['Linux version', 'Wind River Linux', 'Wind River Linux'], 20, 'target']
['cat /proc/cmdline', ['@', '@'], 20, 'target']
['cat /proc/cpuinfo', ['system type', 'machine', 'processor', 'processor'], 20, 'target']
['cat /proc/iomem', ['System RAM', 'System RAM'], 20, 'target']
['ls -l /proc/vm*', ['vmcore', 'vmcore'], 20, 'target']
['file $(which kexec) > src && for i in x86-64 PowerPC MIPS64; do grep -i $i src && EXPECT=EP_${i}_3; done', ['@', '@'], 20, 'target']
['echo $EXPECT', ['EP_x86-64_3', 'EP_PowerPC_3', 'EP_MIPS64_3', 'EP_x86-64_3'], 20, 'target']
["nfsre=$(cat /proc/cmdline|sed 's/.*nfsroot=//g' |sed 's/rootfs.*//g') && echo $EXPECT", ['EP_x86-64_3', 'EP_x86-64_3'], 20, 'EP_x86-64_3']
['mount -o nolock $nfsre /mnt && echo $EXPECT', ['EP_x86-64_3', 'EP_x86-64_3'], 20, 'EP_x86-64_3']
["sed -i 's/crashkernel=1024M@64M //g' /mnt/*pxe*.cfg && echo $EXPECT", ['EP_x86-64_3', 'EP_x86-64_3'], 20, 'EP_x86-64_3']
['umount /mnt && echo $EXPECT', ['EP_x86-64_3', 'EP_x86-64_3'], 20, 'EP_x86-64_3']
Failed commands and expect result
["echo 'c' > /proc/sysrq-trigger", ['login:', 'Login:', 'login:'], 1200, 'target']
WRL Test Completed Unsuccessfully
