Wind River Support Network

Description

32 failure of LSB Core Tests on intel-x86-64

Steps to Reproduce

     1 configure --enable-board=intel-x86_64 --enable-kernel=cgl --enable-rootfs=glibc-cgl --with-template=feature/lsbtesting
    2, make fs
    3, boot the system and make sure the filesystem is hard disk.
    4, execute the lsb test
    1) Download "LSB 5.0 Distribution Testkit" for different arch from:
    http://www.linuxfoundation.org/collaborate/workgroups/lsb/download

    2) Unpack the package
    tar xzf lsb-dist-testkit-manager-<version>.<architecture>.tar.gz

    3) Execute install.sh under lsb-dist-testkit-manager
    If run test on ppc, you will meet an error when install.sh try to install rpm package,
    please update /etc/rpm/platform and then execute install.sh again

    4) run LSB Distribution Checker
    /opt/lsb/test/manager/bin/dist-checker-start.pl [port-number]
    The port-number argument is optional (by default 8888 is taken). This
    script will start a simple web server embedded in the Distribution Checker and
    will try to locate and open your web-browser with the proper address to this
    server.

    5) Login web server with your web-browser
    http://ip_addr:8888

    6) Operation on web browser
    a. Click "Refresh list", it will refresh the test case and test suit list.
    b. Chose all test suite except "Manual Tests"
    c. Click "Run Selected Test" to start testing.
    lsb test suite will down load test case from internet, and it is a long time to finish all test cases, more than 12 hours.

    7) After all testing complete, copy test results out.
    Results are saved in /var/opt/lsb/test/manager/results/