Not to be fixed
Created: Jan 8, 2015
Updated: Apr 19, 2018
Resolved Date: Apr 17, 2018
Found In Version: 7.0
Severity: Standard
Applicable for: Wind River Linux 7
Component/s: BSP
Problem Description
======================
when boot target, some timeout message appeared, and the boot time was too long, even more than 10 minutes. we can reproduce this issue on barcode 22038.
logs:
Welcome to Wind River Linux 7.0.0.0!
systemd[1]: [/lib/systemd/system/ripngd.service:1] Assignment outside of section. Ignoring.
systemd[1]: [/lib/systemd/system/ripngd.service:2] Assignment outside of section. Ignoring.
systemd[1]: [/lib/systemd/system/ripngd.service:3] Assignment outside of section. Ignoring.
systemd[1]: [/lib/systemd/system/ripngd.service:4] Assignment outside of section. Ignoring.
systemd[1]: [/lib/systemd/system/ripngd.service:5] Assignment outside of section. Ignoring.
systemd[1]: Expecting device dev-ttyS0.device...
Expecting device dev-ttyS0.device...
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Remote File Systems.
[ OK ] Reached target Remote File Systems.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ OK ] Set up automount Arbitrary Executab...ats File System Automount Point.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Swap.
[ OK ] Reached target Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Root Slice.
[ OK ] Created slice Root Slice.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ OK ] Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting Delayed Shutdown Socket.
[ OK ] Listening on Delayed Shutdown Socket.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Starting Syslog Socket.
[ OK ] Listening on Syslog Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
[ OK ] Listening on udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting User and Session Slice.
[ OK ] Created slice User and Session Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting Journal Socket.
[ OK ] Listening on Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting System Slice.
[ OK ] Created slice System Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Started File System Check on Root Device.
systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Mounting Debug File System...
Mounting Debug File System...
systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
Starting Create list of required st... nodes for the current kernel...
systemd[1]: Starting udev Coldplug all Devices...
Starting udev Coldplug all Devices...
systemd[1]: Starting system-getty.slice.
[ OK ] Created slice system-getty.slice.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-serial\x2dgetty.slice.
[ OK ] Created slice system-serial\x2dgetty.slice.
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Starting (null)...
Starting (null)...
systemd[1]: Starting Journal Service...
Starting Journal Service...
[ OK ] Started Journal Service.
systemd[1]: Started Journal Service.
[ OK ] Reached target Slices.
Mounting Temporary Directory...
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted Debug File System.
[ OK ] Mounted Temporary Directory.
[ OK ] Started Remount Root and Kernel File Systems.
[ OK ] Started Create list of required sta...ce nodes for the current kernel.
Starting Create Static Device Nodes in /dev...
[ OK ] Started udev Coldplug all Devices.
fuse init (API version 7.22)
[ OK ] Started Load Kernel Modules.
Starting Apply Kernel Variables...
Mounting FUSE Control File System...
[ OK ] Mounted FUSE Control File System.
[ OK ] Started (null).
[ OK ] Started Create Static Device Nodes in /dev.
Starting udev Kernel Device Manager...
[ OK ] Reached target Local File Systems (Pre).
Mounting /var/volatile...
[ OK ] Started Apply Kernel Variables.
[ OK ] Mounted /var/vsystemd-udevd[180]: starting version 216
olatile.
[ OK ] Started udev Kernel Device Manager.
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems.
Starting Trigger Flushing of Journal to Persistent Storage...
Starting Create Volatile Files and Directories...
systemd-journald[146]: Received request to flush runtime journal from PID 1
[ OK ] Started Trigger Flushing of Journal to Persistent Storage.
[ OK ] Started Load/Save Random Seed.
[ OK ] Started Create Volatile Files and Directories.
Starting Network Time Synchronization...
Starting Security Auditing Service...
[ OK ] Started Security Auditing Service.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
type=1305 audit(1420684704.797:2): audit_pid=204 old=0 auid=4294967295 ses=4294967295
res=1
ACPI: Requesting acpi_cpufreq
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Initialization.
[ OK ] Listening on CUPS Printing Service Sockets.
[ OK ] Listening on RPCbind Server Activation Socket.
[ OK ] Reached target Paths.
[ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Reached target Timers.
Starting Restore Sound Card State...
[ OK ] Reached target System Time Synchronized.
[ OK ] Found device /dev/ttyS0.
mei_me 0000:00:03.0: reset: connect/disconnect timeout.
mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
scsi6 : ata_generic
scsi7 : ata_generic
ata7: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
ata8: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
[ OK ] Listening on sshd.socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
Starting (null)...
Starting (null)...
Starting (null)...
Starting System Logger Daemon...
Starting ACPI Event Daemon...
Starting Periodic Command Scheduler...
[ OK ] Started Periodic Command Scheduler.
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \GLBC 1 (20130328/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SACT 2 (20130328/utaddress-251)
ACPI Warning: 0x0000000000000828-0x000000000000082f SystemIO conflicts with Region \SSTS 3 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x00000000000008b0-0x00000000000008bf SystemIO conflicts with Region \GIC2 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000880-0x00000000000008af SystemIO conflicts with Region \GIC1 1 (20130328/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
Starting GNU Zebra routing manager...
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
Starting Job spooling tools...
[ OK ] Started Job spooling tools.
Starting Ethernet Bridge Filtering Tables...
Starting Avahi mDNS/DNS-SD Stack...
Starting Dynamic Host Configuration Protocol (DHCP)...
[ OK ] Started Dynamic Host Configuration Protocol (DHCP).
Starting irqbalance daemon...
[ OK ] Started irqbalance daemon.
Starting strongSwan IPsec...
[ OK ] Started strongSwan IPsec.
Starting Apply Cpu Microcode...
Starting ripngd.service...
Starting System Logging Service...
Starting D-Bus System Message Bus...
[ OK ] Started D-Bus System Message Bus.
microcode: CPU0 sig=0x6fb, pf=0x1, revision=0xb6
microcode: CPU0 updated to revision 0xba, date = 2010-10-03
microcode: CPU1 sig=0x6fb, pf=0x1, revision=0xb6
microcode: CPU1 updated to revision 0xba, date = 2010-10-03
[ OK ] Started Avahi mDNS/DNS-SD Stack.
Starting Login Service...
Starting Permit User Sessions...
[ OK ] Started System Logging Service.
[ OK ] Started Restore Sound Card State.
[FAILED] Failed to start (null).
See 'systemctl status spmd.service' for details.
[FAILED] Failed to start (null).
See 'systemctl status boa.service' for details.
[FAILED] Failed to start System Logger Daemon.
See 'systemctl status syslog-ng.service' for details.
[ OK ] Started ACPI Event Daemon.
[ OK ] Started Ethernet Bridge Filtering Tables.
[ OK ] Started Apply Cpu Microcode.
[ OK ] Started ripngd.service.
[ OK ] Started GNU Zebra routing manager.
Stopping System Logger Daemon...
[ OK ] Stopped System Logger Daemon.
Starting System Logger Daemon...
Starting OSPF routing daemon...
Starting OSPF routing daemon for IPv6...
[ OK ] Reached target Network.
[ OK ] Reached target Network is Online.
Starting LSB: HPA's tftp client...
Starting LSB: Control drbd resources....
Starting LSB: Corosync Cluster Engine....
Starting Network Time Service...
Starting Xinetd A Powerful Replacement For Inetd...
Starting FreeRADIUS high performance RADIUS server....
Starting Vsftpd ftp daemon...
[ OK ] Started Vsftpd ftp daemon.
Starting Berkeley Internet Name Domain (DNS)...
Starting DNS forwarder and DHCP server...
Starting Samba NMB Daemon...
Starting The RPC portmapper...
Starting Target Communication Framework agent...
Starting Collectd...
[ OK ] Started Collectd.
Starting /etc/rc.local Compatibility...
Starting IS-IS routing daemon...
Starting RIP routing daemon...
Starting BGP routing daemon...
Starting Babel routing daemon...
[ OK ] Started Permit User Sessions.
[FAILED] Failed to start System Logger Daemon.
See 'systemctl status syslog-ng.service' for details.
[ OK ] Started OSPF routing daemon for IPv6.
[FAILED] Failed to start LSB: Corosync Cluster Engine..
See 'systemctl status corosync-daemon.service' for details.
[ OK ] Started Xinetd A Powerful Replacement For Inetd.
[ OK ] Started The RPC portmapper.
[ OK ] Started Login Service.
[ OK ] Started /etc/rc.local Compatibility.
Stopping System Logger Daemon...
[ OK ] Stopped System Logger Daemon.
Starting System Logger Daemon...
Starting Getty on tty1...
[ OK ] Started Getty on tty1.
Starting Serial Getty on ttyS0...
[ OK ] Started Serial Getty on ttyS0.
[ OK ] Reached target Login Prompts.
[FAILED] Failed to start System Logger Daemon.
See 'systemctl status syslog-ng.service' for details.
[ OK ] Started Network Time Service.
[FAILED] Failed to start LSB: Control drbd resources..
See 'systemctl status drbd.service' for details.
[ OK ] Started LSB: HPA's tftp client.
[ OK ] Started RIP routing daemon.
Stopping System Logger Daemon...
[ OK ] Stopped System Logger Daemon.
Starting System Logger Daemon...
[ OK ] Started BGP routing daemon.
[FAILED] Failed to start System Logger Daemon.
See 'systemctl status syslog-ng.service' for details.
[ OK ] Started DNS forwarder and DHCP server.
Stopping System Logger Daemon...
[ OK ] Stopped System Logger Daemon.
Starting System Logger Daemon...
Starting Libvirtd Service...
[FAILED] Failed to start System Logger Daemon.
See 'systemctl status syslog-ng.service' for details.
[ OK ] Started OSPF routing daemon.
[ OK ] Started IS-IS routing daemon.
Stopping System Logger Daemon...
[ OK ] Stopped System Logger Daemon.
Starting System Logger Daemon...
[FAILED] Failed to start System Logger Daemon.
See 'systemctl shda_codec: AD1984: BIOS auto-probing.
tatus syslog-ng.service' for details.
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input3
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ OK input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
] Started Babel input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ OK ] Reached target Sound Card.
NET: Registered protocol family 15
[ OK ] Started Libvirtd Service.
WARNING: tcf-agent listening on port for commands to monitor/modify the system.
[ OK ] Started Target Communication Framework agent.
[ OK ] Started (null).
[FAILED] Failed to start FreeRADIUS high performance RADIUS server..
See 'systemctl status radiusd.service' for details.
[ OK ] Started Samba NMB Daemon.
Starting Samba SMB Daemon...
Initializing XFRM netlink socket
[ OK ] Started Berkeley Internet Name Domain (DNS).
[ OK ] Reached target Host and Network Name Lookups.
Starting LSB: Starts ProFTPD daemon...
mei_me 0000:00:03.0: reset: connect/disconnect timeout.
mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
[ OK ] Started Samba SMB Daemon.
Wind River Linux 7.0.0.0 dell760-lxnetwork-vlan5 ttyS0
dell760-lxnetwork-vlan5 login: mei_me 0000:00:03.0: reset: connect/disconnect timeout.
mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
Bridge firewalling registered
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
mei_me 0000:00:03.0: reset: connect/disconnect timeout.
mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
mei_me 0000:00:03.0: reset: connect/disconnect timeout.
mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
mei_me 0000:00:03.0: reset: connect/disconnect timeout.
mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
mei_me 0000:00:03.0: reset: connect/disconnect timeout.
mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
mei_me 0000:00:03.0: reset: connect/disconnect timeout.
mei_me 0000:00:03.0: unexpected reset: dev_state = RESETTING
Expected Behavior
======================
no timeout information.
1), configure
wrlinux-x-7.0/wrlinux/configure --enable-board=intel-x86-64 --enable-kernel=cgl --enable-rootfs=glibc-cgl --with-template=feature/valgrind,feature/lttng2,feature/acl,feature/nfsd,feature/mysql,feature/mysql-odbc,feature/kvm,feature/libhugetlbfs,feature/target-toolchain --enable-test=yes --enable-build=profiling --enable-jobs=8 --enable-parallel-pkgbuilds=8 --with-layer=wr-testing/userspace
make fs
2), deploy it on barcode 22038 and boot,
