In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: Set lineevent_state::irq after IRQ register successfully When running gpio test on nxp-ls1028 platform with below command gpiomon --num-events=3 --rising-edge gpiochip1 25 There will be a warning trace as below: Call trace: free_irq+0x204/0x360 lineevent_free+0x64/0x70 gpio_ioctl+0x598/0x6a0 __arm64_sys_ioctl+0xb4/0x100 invoke_syscall+0x5c/0x130 ...... el0t_64_sync+0x1a0/0x1a4 The reason of this issue is that calling request_threaded_irq() function failed, and then lineevent_free() is invoked to release the resource. Since the lineevent_state::irq was already set, so the subsequent invocation of free_irq() would trigger the above warning call trace. To fix this issue, set the lineevent_state::irq after the IRQ register successfully.
Find out more about CVE-2022-48660 from the MITRE-CVE dictionary and NIST NVD
Login may be required to access defects or downloads.
Product Name | Status | Defect | Fixed | Downloads |
---|---|---|---|---|
Linux | ||||
Wind River Linux LTS 17 | Requires LTSS | -- | -- | -- |
Wind River Linux 8 | Requires LTSS | -- | -- | -- |
Wind River Linux 9 | Requires LTSS | -- | -- | -- |
Wind River Linux 7 | Requires LTSS | -- | -- | -- |
Wind River Linux LTS 21 | Investigate | -- | -- | -- |
Wind River Linux LTS 22 | Fixed |
LIN1022-7858 |
10.22.33.17 | -- |
Wind River Linux LTS 18 | Requires LTSS | -- | -- | -- |
Wind River Linux LTS 19 | Investigate | -- | -- | -- |
Wind River Linux CD release | N/A | -- | -- | -- |
Wind River Linux 6 | Requires LTSS | -- | -- | -- |
Wind River Linux LTS 23 | Not Vulnerable | -- | -- | -- |
VxWorks | ||||
VxWorks 7 | Not Vulnerable | -- | -- | -- |
VxWorks 6.9 | Not Vulnerable | -- | -- | -- |
Helix Virtualization Platform Cert Edition | ||||
Helix Virtualization Platform Cert Edition | Not Vulnerable | -- | -- | -- |
Product Name | Status | Defect | Fixed | Downloads |
---|