The Common Vulnerabilities and Exposures (CVE) project, maintained by the MITRE Corporation, is a list of all standardized names for vulnerabilities and security exposures.
| ID | Description | Priority | Modified date |
|---|---|---|---|
| CVE-2025-24337 | WriteFreely through 0.15.1, when MySQL is used, allows local users to discover credentials by reading config.ini. | -- | Jan 20, 2025 |
| CVE-2025-24014 | Vim is an open source, command line text editor. A segmentation fault was found in Vim before 9.1.1043. In silent Ex mode (-s -e), Vim typically doesn\'t show a screen and just operates silently in batch mode. However, it is still possible to trigger the function that handles the scrolling of a gui version of Vim by feeding some binary characters to Vim. The function that handles the scrolling however may be triggering a redraw, which will access the ScreenLines pointer, even so this variable hasn\'t been allocated (since there is no screen). This vulnerability is fixed in 9.1.1043. | -- | Jan 21, 2025 |
| CVE-2025-24013 | CodeIgniter is a PHP full-stack web framework. Prior to 4.5.8, CodeIgniter lacked proper header validation for its name and value. The potential attacker can construct deliberately malformed headers with Header class. This could disrupt application functionality, potentially causing errors or generating invalid HTTP requests. In some cases, these malformed requests might lead to a DoS scenario if a remote service’s web application firewall interprets them as malicious and blocks further communication with the application. This vulnerability is fixed in 4.5.8. | -- | Jan 20, 2025 |
| CVE-2025-24010 | Vite is a frontend tooling framework for javascript. Vite allowed any websites to send any requests to the development server and read the response due to default CORS settings and lack of validation on the Origin header for WebSocket connections. This vulnerability is fixed in 6.0.9, 5.4.12, and 4.5.6. | -- | Jan 20, 2025 |
| CVE-2025-23221 | Fedify is a TypeScript library for building federated server apps powered by ActivityPub and other standards. This vulnerability allows a user to maneuver the Webfinger mechanism to perform a GET request to any internal resource on any Host, Port, URL combination regardless of present security mechanisms, and forcing the victim’s server into an infinite loop causing Denial of Service. Moreover, this issue can also be maneuvered into performing a Blind SSRF attack. This vulnerability is fixed in 1.0.14, 1.1.11, 1.2.11, and 1.3.4. | -- | Jan 20, 2025 |
| CVE-2025-23220 | WeGIA is an open source web manager with a focus on the Portuguese language and charitable institutions. A SQL Injection vulnerability was identified in the WeGIA application, specifically in the adicionar_raca.php endpoint. This vulnerability allows attackers to execute arbitrary SQL commands in the database, allowing unauthorized access to sensitive information. During the exploit, it was possible to perform a complete dump of the application\'s database, highlighting the severity of the flaw. This vulnerability is fixed in 3.2.10. | -- | Jan 20, 2025 |
| CVE-2025-23219 | WeGIA is an open source web manager with a focus on the Portuguese language and charitable institutions. A SQL Injection vulnerability was identified in the WeGIA application, specifically in the adicionar_cor.php endpoint. This vulnerability allows attackers to execute arbitrary SQL commands in the database, allowing unauthorized access to sensitive information. During the exploit, it was possible to perform a complete dump of the application\'s database, highlighting the severity of the flaw. This vulnerability is fixed in 3.2.10. | -- | Jan 20, 2025 |
| CVE-2025-23218 | WeGIA is an open source web manager with a focus on the Portuguese language and charitable institutions. A SQL Injection vulnerability was identified in the WeGIA application, specifically in the adicionar_especie.php endpoint. This vulnerability allows attackers to execute arbitrary SQL commands in the database, allowing unauthorized access to sensitive information. During the exploit, it was possible to perform a complete dump of the application\'s database, highlighting the severity of the flaw. This vulnerability is fixed in 3.2.10. | -- | Jan 20, 2025 |
| CVE-2025-23214 | Cosmos provides users the ability self-host a home server by acting as a secure gateway to your application, as well as a server manager. By monitoring the error code returned in the login, it is possible to figure out whether a user exist or not in the database. Patched in 0.17.7. | -- | Jan 20, 2025 |
| CVE-2025-23209 | Craft is a flexible, user-friendly CMS for creating custom digital experiences on the web and beyond. This is an remote code execution (RCE) vulnerability that affects Craft 4 and 5 installs where your security key has already been compromised. Anyone running an unpatched version of Craft with a compromised security key is affected. This vulnerability has been patched in Craft 5.5.8 and 4.13.8. Users who cannot update to a patched version, should rotate their security keys and ensure their privacy to help migitgate the issue. | -- | Jan 18, 2025 |
| CVE-2025-23208 | zot is a production-ready vendor-neutral OCI image registry. The group data stored for users in the boltdb database (meta.db) is an append-list so group revocations/removals are ignored in the API. SetUserGroups is alled on login, but instead of replacing the group memberships, they are appended. This may be due to some conflict with the group definitions in the config file, but that wasn\'t obvious to me if it were the case. Any Zot configuration that relies on group-based authorization will not respect group remove/revocation by an IdP. This issue has been addressed in version 2.1.2. All users are advised to upgrade. There are no known workarounds for this vulnerability. | -- | Jan 17, 2025 |
| CVE-2025-23207 | KaTeX is a fast, easy-to-use JavaScript library for TeX math rendering on the web. KaTeX users who render untrusted mathematical expressions with `renderToString` could encounter malicious input using `\\htmlData` that runs arbitrary JavaScript, or generate invalid HTML. Users are advised to upgrade to KaTeX v0.16.21 to remove this vulnerability. Users unable to upgrade should avoid use of or turn off the `trust` option, or set it to forbid `\\htmlData` commands, forbid inputs containing the substring `\\\\htmlData` and sanitize HTML output from KaTeX. | -- | Jan 17, 2025 |
| CVE-2025-23206 | The AWS Cloud Development Kit (AWS CDK) is an open-source software development framework to define cloud infrastructure in code and provision it through AWS CloudFormation. Users who use IAM OIDC custom resource provider package will download CA Thumbprints as part of the custom resource workflow. However, the current `tls.connect` method will always set `rejectUnauthorized: false` which is a potential security concern. CDK should follow the best practice and set `rejectUnauthorized: true`. However, this could be a breaking change for existing CDK applications and we should fix this with a feature flag. Note that this is marked as low severity Security advisory because the issuer url is provided by CDK users who define the CDK application. If they insist on connecting to a unauthorized OIDC provider, CDK should not disallow this. Additionally, the code block is run in a Lambda environment which mitigate the MITM attack. The patch is in progress. To mitigate, upgrade to CDK v2.177.0 (Expected release date 2025-02-22). Once upgraded, users should make sure the feature flag \'@aws-cdk/aws-iam:oidcRejectUnauthorizedConnections\' is set to true in `cdk.context.json` or `cdk.json`. There are no known workarounds for this vulnerability. | -- | Jan 17, 2025 |
| CVE-2025-23205 | nbgrader is a system for assigning and grading notebooks. Enabling frame-ancestors: \'self\' grants any JupyterHub user the ability to extract formgrader content by sending malicious links to users with access to formgrader, at least when using the default JupyterHub configuration of `enable_subdomains = False`. #1915 disables a protection which would allow user Alice to craft a page embedding formgrader in an IFrame. If Bob visits that page, his credentials will be sent and the formgrader page loaded. Because Alice\'s page is on the same Origin as the formgrader iframe, Javasript on Alice\'s page has _full access_ to the contents of the page served by formgrader using Bob\'s credentials. This issue has been addressed in release 0.9.5 and all users are advised to upgrade. Users unable to upgrade may disable `frame-ancestors: self`, or enable per-user and per-service subdomains with `JupyterHub.enable_subdomains = True` (then even if embedding in an IFrame is allowed, the host page does not have access to the contents of the frame). | -- | Jan 17, 2025 |
| CVE-2025-23202 | Bible Module is a tool designed for ROBLOX developers to integrate Bible functionality into their games. The `FetchVerse` and `FetchPassage` functions in the Bible Module are susceptible to injection attacks due to the absence of input validation. This vulnerability could allow an attacker to manipulate the API request URLs, potentially leading to unauthorized access or data tampering. This issue has been addressed in version 0.0.3. All users are advised to upgrade. There are no known workarounds for this vulnerability. | -- | Jan 17, 2025 |
| CVE-2025-23044 | PwnDoc is a penetration test report generator. There is no CSRF protection in pwndoc, allowing attackers to send requests on a logged-in user\'s behalf. This includes GET and POST requests due to the missing SameSite= attribute on cookies and the ability to refresh cookies. Commit 14acb704891245bf1703ce6296d62112e85aa995 patches the issue. | -- | Jan 20, 2025 |
| CVE-2025-23039 | Caido is a web security auditing toolkit. A Cross-Site Scripting (XSS) vulnerability was identified in Caido v0.45.0 due to improper sanitization in the URL decoding tooltip of HTTP request and response editors. This issue could allow an attacker to execute arbitrary scripts, potentially leading to the theft of sensitive information. This issue has been addressed in version 0.45.1 and all users are advised to upgrade. There are no known workarounds for this vulnerability. | -- | Jan 17, 2025 |
| CVE-2025-22620 | gitoxide is an implementation of git written in Rust. Prior to 0.17.0, gix-worktree-state specifies 0777 permissions when checking out executable files, intending that the umask will restrict them appropriately. But one of the strategies it uses to set permissions is not subject to the umask. This causes files in a repository to be world-writable in some situations. This vulnerability is fixed in 0.17.0. | -- | Jan 20, 2025 |
| CVE-2025-22131 | PhpSpreadsheet is a PHP library for reading and writing spreadsheet files. Cross-Site Scripting (XSS) vulnerability in the code which translates the XLSX file into a HTML representation and displays it in the response. | -- | Jan 20, 2025 |
| CVE-2025-21655 | In the Linux kernel, the following vulnerability has been resolved: io_uring/eventfd: ensure io_eventfd_signal() defers another RCU period io_eventfd_do_signal() is invoked from an RCU callback, but when dropping the reference to the io_ev_fd, it calls io_eventfd_free() directly if the refcount drops to zero. This isn\'t correct, as any potential freeing of the io_ev_fd should be deferred another RCU grace period. Just call io_eventfd_put() rather than open-code the dec-and-test and free, which will correctly defer it another RCU grace period. | -- | Jan 20, 2025 |
| CVE-2025-21654 | In the Linux kernel, the following vulnerability has been resolved: ovl: support encoding fid from inode with no alias Dmitry Safonov reported that a WARN_ON() assertion can be trigered by userspace when calling inotify_show_fdinfo() for an overlayfs watched inode, whose dentry aliases were discarded with drop_caches. The WARN_ON() assertion in inotify_show_fdinfo() was removed, because it is possible for encoding file handle to fail for other reason, but the impact of failing to encode an overlayfs file handle goes beyond this assertion. As shown in the LTP test case mentioned in the link below, failure to encode an overlayfs file handle from a non-aliased inode also leads to failure to report an fid with FAN_DELETE_SELF fanotify events. As Dmitry notes in his analyzis of the problem, ovl_encode_fh() fails if it cannot find an alias for the inode, but this failure can be fixed. ovl_encode_fh() seldom uses the alias and in the case of non-decodable file handles, as is often the case with fanotify fid info, ovl_encode_fh() never needs to use the alias to encode a file handle. Defer finding an alias until it is actually needed so ovl_encode_fh() will not fail in the common case of FAN_DELETE_SELF fanotify events. | -- | Jan 19, 2025 |
| CVE-2025-21653 | In the Linux kernel, the following vulnerability has been resolved: net_sched: cls_flow: validate TCA_FLOW_RSHIFT attribute syzbot found that TCA_FLOW_RSHIFT attribute was not validated. Right shitfing a 32bit integer is undefined for large shift values. UBSAN: shift-out-of-bounds in net/sched/cls_flow.c:329:23 shift exponent 9445 is too large for 32-bit type \'u32\' (aka \'unsigned int\') CPU: 1 UID: 0 PID: 54 Comm: kworker/u8:3 Not tainted 6.13.0-rc3-syzkaller-00180-g4f619d518db9 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468 flow_classify+0x24d5/0x25b0 net/sched/cls_flow.c:329 tc_classify include/net/tc_wrapper.h:197 [inline] __tcf_classify net/sched/cls_api.c:1771 [inline] tcf_classify+0x420/0x1160 net/sched/cls_api.c:1867 sfb_classify net/sched/sch_sfb.c:260 [inline] sfb_enqueue+0x3ad/0x18b0 net/sched/sch_sfb.c:318 dev_qdisc_enqueue+0x4b/0x290 net/core/dev.c:3793 __dev_xmit_skb net/core/dev.c:3889 [inline] __dev_queue_xmit+0xf0e/0x3f50 net/core/dev.c:4400 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:236 iptunnel_xmit+0x55d/0x9b0 net/ipv4/ip_tunnel_core.c:82 udp_tunnel_xmit_skb+0x262/0x3b0 net/ipv4/udp_tunnel_core.c:173 geneve_xmit_skb drivers/net/geneve.c:916 [inline] geneve_xmit+0x21dc/0x2d00 drivers/net/geneve.c:1039 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x27a/0x7d0 net/core/dev.c:3606 __dev_queue_xmit+0x1b73/0x3f50 net/core/dev.c:4434 | -- | Jan 19, 2025 |
| CVE-2025-21652 | In the Linux kernel, the following vulnerability has been resolved: ipvlan: Fix use-after-free in ipvlan_get_iflink(). syzbot presented an use-after-free report [0] regarding ipvlan and linkwatch. ipvlan does not hold a refcnt of the lower device unlike vlan and macvlan. If the linkwatch work is triggered for the ipvlan dev, the lower dev might have already been freed, resulting in UAF of ipvlan->phy_dev in ipvlan_get_iflink(). We can delay the lower dev unregistration like vlan and macvlan by holding the lower dev\'s refcnt in dev->netdev_ops->ndo_init() and releasing it in dev->priv_destructor(). Jakub pointed out calling .ndo_XXX after unregister_netdevice() has returned is error prone and suggested [1] addressing this UAF in the core by taking commit 750e51603395 (net: avoid potential UAF in default_operstate()) further. Let\'s assume unregistering devices DOWN and use RCU protection in default_operstate() not to race with the device unregistration. [0]: BUG: KASAN: slab-use-after-free in ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 Read of size 4 at addr ffff0000d768c0e0 by task kworker/u8:35/6944 CPU: 0 UID: 0 PID: 6944 Comm: kworker/u8:35 Not tainted 6.13.0-rc2-g9bc5c9515b48 #12 4c3cb9e8b4565456f6a355f312ff91f4f29b3c47 Hardware name: linux,dummy-virt (DT) Workqueue: events_unbound linkwatch_event Call trace: show_stack+0x38/0x50 arch/arm64/kernel/stacktrace.c:484 (C) __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xbc/0x108 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x16c/0x6f0 mm/kasan/report.c:489 kasan_report+0xc0/0x120 mm/kasan/report.c:602 __asan_report_load4_noabort+0x20/0x30 mm/kasan/report_generic.c:380 ipvlan_get_iflink+0x84/0x88 drivers/net/ipvlan/ipvlan_main.c:353 dev_get_iflink+0x7c/0xd8 net/core/dev.c:674 default_operstate net/core/link_watch.c:45 [inline] rfc2863_policy+0x144/0x360 net/core/link_watch.c:72 linkwatch_do_dev+0x60/0x228 net/core/link_watch.c:175 __linkwatch_run_queue+0x2f4/0x5b8 net/core/link_watch.c:239 linkwatch_event+0x64/0xa8 net/core/link_watch.c:282 process_one_work+0x700/0x1398 kernel/workqueue.c:3229 process_scheduled_works kernel/workqueue.c:3310 [inline] worker_thread+0x8c4/0xe10 kernel/workqueue.c:3391 kthread+0x2b0/0x360 kernel/kthread.c:389 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:862 Allocated by task 9303: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x30/0x68 mm/kasan/common.c:68 kasan_save_alloc_info+0x44/0x58 mm/kasan/generic.c:568 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x84/0xa0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4283 [inline] __kmalloc_node_noprof+0x2a0/0x560 mm/slub.c:4289 __kvmalloc_node_noprof+0x9c/0x230 mm/util.c:650 alloc_netdev_mqs+0xb4/0x1118 net/core/dev.c:11209 rtnl_create_link+0x2b8/0xb60 net/core/rtnetlink.c:3595 rtnl_newlink_create+0x19c/0x868 net/core/rtnetlink.c:3771 __rtnl_newlink net/core/rtnetlink.c:3896 [inline] rtnl_newlink+0x122c/0x15c0 net/core/rtnetlink.c:4011 rtnetlink_rcv_msg+0x61c/0x918 net/core/rtnetlink.c:6901 netlink_rcv_skb+0x1dc/0x398 net/netlink/af_netlink.c:2542 rtnetlink_rcv+0x34/0x50 net/core/rtnetlink.c:6928 netlink_unicast_kernel net/netlink/af_netlink.c:1321 [inline] netlink_unicast+0x618/0x838 net/netlink/af_netlink.c:1347 netlink_sendmsg+0x5fc/0x8b0 net/netlink/af_netlink.c:1891 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg net/socket.c:726 [inline] __sys_sendto+0x2ec/0x438 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __arm64_sys_sendto+0xe4/0x110 net/socket.c:2200 __invoke_syscall arch/arm64/kernel/syscall.c:35 [inline] invoke_syscall+0x90/0x278 arch/arm64/kernel/syscall.c:49 el0_svc_common+0x13c/0x250 arch/arm64/kernel/syscall.c:132 do_el0_svc+0x54/0x70 arch/arm64/kernel/syscall.c:151 el ---truncated--- | -- | Jan 19, 2025 |
| CVE-2025-21651 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: don\'t auto enable misc vector Currently, there is a time window between misc irq enabled and service task inited. If an interrupte is reported at this time, it will cause warning like below: [ 16.324639] Call trace: [ 16.324641] __queue_delayed_work+0xb8/0xe0 [ 16.324643] mod_delayed_work_on+0x78/0xd0 [ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge] [ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge] [ 16.324666] __handle_irq_event_percpu+0x64/0x1e0 [ 16.324667] handle_irq_event+0x80/0x170 [ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc [ 16.324671] __handle_domain_irq+0x84/0xfc [ 16.324673] gic_handle_irq+0x88/0x2c0 [ 16.324674] el1_irq+0xb8/0x140 [ 16.324677] arch_cpu_idle+0x18/0x40 [ 16.324679] default_idle_call+0x5c/0x1bc [ 16.324682] cpuidle_idle_call+0x18c/0x1c4 [ 16.324684] do_idle+0x174/0x17c [ 16.324685] cpu_startup_entry+0x30/0x6c [ 16.324687] secondary_start_kernel+0x1a4/0x280 [ 16.324688] ---[ end trace 6aa0bff672a964aa ]--- So don\'t auto enable misc vector when request irq.. | -- | Jan 19, 2025 |
| CVE-2025-21650 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issue The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 | -- | Jan 19, 2025 |
| CVE-2025-21649 | In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is sent on HIP08 devices Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180 | -- | Jan 19, 2025 |
| CVE-2025-21648 | In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: clamp maximum hashtable size to INT_MAX Use INT_MAX as maximum size for the conntrack hashtable. Otherwise, it is possible to hit WARN_ON_ONCE in __kvmalloc_node_noprof() when resizing hashtable because __GFP_NOWARN is unset. See: 0708a0afe291 (mm: Consider __GFP_NOWARN flag for oversized kvmalloc() calls) Note: hashtable resize is only possible from init_netns. | -- | Jan 19, 2025 |
| CVE-2025-21647 | In the Linux kernel, the following vulnerability has been resolved: sched: sch_cake: add bounds checks to host bulk flow fairness counts Even though we fixed a logic error in the commit cited below, syzbot still managed to trigger an underflow of the per-host bulk flow counters, leading to an out of bounds memory access. To avoid any such logic errors causing out of bounds memory accesses, this commit factors out all accesses to the per-host bulk flow counters to a series of helpers that perform bounds-checking before any increments and decrements. This also has the benefit of improving readability by moving the conditional checks for the flow mode into these helpers, instead of having them spread out throughout the code (which was the cause of the original logic error). As part of this change, the flow quantum calculation is consolidated into a helper function, which means that the dithering applied to the ost load scaling is now applied both in the DRR rotation and when a sparse flow\'s quantum is first initiated. The only user-visible effect of this is that the maximum packet size that can be sent while a flow stays sparse will now vary with +/- one byte in some cases. This should not make a noticeable difference in practice, and thus it\'s not worth complicating the code to preserve the old behaviour. | -- | Jan 19, 2025 |
| CVE-2025-21646 | In the Linux kernel, the following vulnerability has been resolved: afs: Fix the maximum cell name length The kafs filesystem limits the maximum length of a cell to 256 bytes, but a problem occurs if someone actually does that: kafs tries to create a directory under /proc/net/afs/ with the name of the cell, but that fails with a warning: WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:405 because procfs limits the maximum filename length to 255. However, the DNS limits the maximum lookup length and, by extension, the maximum cell name, to 255 less two (length count and trailing NUL). Fix this by limiting the maximum acceptable cellname length to 253. This also allows us to be sure we can create the /afs/.<cell>/ mountpoint too. Further, split the YFS VL record cell name maximum to be the 256 allowed by the protocol and ignore the record retrieved by YFSVL.GetCellName if it exceeds 253. | -- | Jan 19, 2025 |
| CVE-2025-21645 | In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd/pmc: Only disable IRQ1 wakeup where i8042 actually enabled it Wakeup for IRQ1 should be disabled only in cases where i8042 had actually enabled it, otherwise wake_depth for this IRQ will try to drop below zero and there will be an unpleasant WARN() logged: kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug kernel: ------------[ cut here ]------------ kernel: Unbalanced IRQ 1 wake disable kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0 The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and .poweroff handlers. i8042_pm_suspend(), however, is only set as the .suspend handler. Fix the issue by call PMC suspend handler only from the same set of dev_pm_ops handlers as i8042_pm_suspend(), which currently means just the .suspend handler. To reproduce this issue try hibernating (S4) the machine after a fresh boot without putting it into s2idle first. [ij: edited the commit message.] | -- | Jan 19, 2025 |
| CVE-2025-21644 | In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix tlb invalidation when wedging If GuC fails to load, the driver wedges, but in the process it tries to do stuff that may not be initialized yet. This moves the xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says, it\'s a software-only initialization and should had been named with the _early() suffix. Move it to be called by xe_gt_init_early(), so the locks and seqno are initialized, avoiding a NULL ptr deref when wedging: xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01 xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged. ... BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3 Tainted: [U]=USER, [W]=WARN Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022 RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe] This can be easily triggered by poking the GuC binary to force a signature failure. There will still be an extra message, xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100 but that\'s better than a NULL ptr deref. (cherry picked from commit 5001ef3af8f2c972d6fd9c5221a8457556f8bea6) | -- | Jan 19, 2025 |
| CVE-2025-21643 | In the Linux kernel, the following vulnerability has been resolved: netfs: Fix kernel async DIO Netfslib needs to be able to handle kernel-initiated asynchronous DIO that is supplied with a bio_vec[] array. Currently, because of the async flag, this gets passed to netfs_extract_user_iter() which throws a warning and fails because it only handles IOVEC and UBUF iterators. This can be triggered through a combination of cifs and a loopback blockdev with something like: mount //my/cifs/share /foo dd if=/dev/zero of=/foo/m0 bs=4K count=1K losetup --sector-size 4096 --direct-io=on /dev/loop2046 /foo/m0 echo hello >/dev/loop2046 This causes the following to appear in syslog: WARNING: CPU: 2 PID: 109 at fs/netfs/iterator.c:50 netfs_extract_user_iter+0x170/0x250 [netfs] and the write to fail. Fix this by removing the check in netfs_unbuffered_write_iter_locked() that causes async kernel DIO writes to be handled as userspace writes. Note that this change relies on the kernel caller maintaining the existence of the bio_vec array (or kvec[] or folio_queue) until the op is complete. | -- | Jan 19, 2025 |
| CVE-2025-21642 | In the Linux kernel, the following vulnerability has been resolved: mptcp: sysctl: sched: avoid using current->nsproxy Using the \'net\' structure via \'current\' is not recommended for different reasons. First, if the goal is to use it to read or write per-netns data, this is inconsistent with how the generic sysctl entries are doing: directly by only using pointers set to the table entry, e.g. table->data. Linked to that, the per-netns data should always be obtained from the table linked to the netns it had been created for, which may not coincide with the reader\'s or writer\'s netns. Another reason is that access to current->nsproxy->netns can oops if attempted when current->nsproxy had been dropped when the current task is exiting. This is what syzbot found, when using acct(2): Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 5924 Comm: syz-executor Not tainted 6.13.0-rc5-syzkaller-00004-gccb98ccef0e5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_sys_call_handler+0x403/0x5d0 fs/proc/proc_sysctl.c:601 __kernel_write_iter+0x318/0xa80 fs/read_write.c:612 __kernel_write+0xf6/0x140 fs/read_write.c:632 do_acct_process+0xcb0/0x14a0 kernel/acct.c:539 acct_pin_kill+0x2d/0x100 kernel/acct.c:192 pin_kill+0x194/0x7c0 fs/fs_pin.c:44 mnt_pin_kill+0x61/0x1e0 fs/fs_pin.c:81 cleanup_mnt+0x3ac/0x450 fs/namespace.c:1366 task_work_run+0x14e/0x250 kernel/task_work.c:239 exit_task_work include/linux/task_work.h:43 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 get_signal+0x2576/0x2610 kernel/signal.c:3017 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fee3cb87a6a Code: Unable to access opcode bytes at 0x7fee3cb87a40. RSP: 002b:00007fffcccac688 EFLAGS: 00000202 ORIG_RAX: 0000000000000037 RAX: 0000000000000000 RBX: 00007fffcccac710 RCX: 00007fee3cb87a6a RDX: 0000000000000041 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 00007fffcccac6ac R09: 00007fffcccacac7 R10: 00007fffcccac710 R11: 0000000000000202 R12: 00007fee3cd49500 R13: 00007fffcccac6ac R14: 0000000000000000 R15: 00007fee3cd4b000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ---truncated--- | -- | Jan 19, 2025 |
| CVE-2025-21641 | In the Linux kernel, the following vulnerability has been resolved: mptcp: sysctl: blackhole timeout: avoid using current->nsproxy As mentioned in the previous commit, using the \'net\' structure via \'current\' is not recommended for different reasons: - Inconsistency: getting info from the reader\'s/writer\'s netns vs only from the opener\'s netns. - current->nsproxy can be NULL in some cases, resulting in an \'Oops\' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The \'pernet\' structure can be obtained from the table->data using container_of(). | -- | Jan 19, 2025 |
| CVE-2025-21640 | In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy As mentioned in a previous commit of this series, using the \'net\' structure via \'current\' is not recommended for different reasons: - Inconsistency: getting info from the reader\'s/writer\'s netns vs only from the opener\'s netns. - current->nsproxy can be NULL in some cases, resulting in an \'Oops\' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The \'net\' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the \'net\' structure, but that would increase the size of this fix, to use \'*data\' everywhere \'net->sctp.sctp_hmac_alg\' is used. | -- | Jan 19, 2025 |
| CVE-2025-21639 | In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: rto_min/max: avoid using current->nsproxy As mentioned in a previous commit of this series, using the \'net\' structure via \'current\' is not recommended for different reasons: - Inconsistency: getting info from the reader\'s/writer\'s netns vs only from the opener\'s netns. - current->nsproxy can be NULL in some cases, resulting in an \'Oops\' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The \'net\' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the \'net\' structure, but that would increase the size of this fix, to use \'*data\' everywhere \'net->sctp.rto_min/max\' is used. | -- | Jan 19, 2025 |
| CVE-2025-21638 | In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: auth_enable: avoid using current->nsproxy As mentioned in a previous commit of this series, using the \'net\' structure via \'current\' is not recommended for different reasons: - Inconsistency: getting info from the reader\'s/writer\'s netns vs only from the opener\'s netns. - current->nsproxy can be NULL in some cases, resulting in an \'Oops\' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The \'net\' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while \'sctp.ctl_sock\' still needs to be retrieved from \'net\' structure. | -- | Jan 19, 2025 |
| CVE-2025-21637 | In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: udp_port: avoid using current->nsproxy As mentioned in a previous commit of this series, using the \'net\' structure via \'current\' is not recommended for different reasons: - Inconsistency: getting info from the reader\'s/writer\'s netns vs only from the opener\'s netns. - current->nsproxy can be NULL in some cases, resulting in an \'Oops\' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The \'net\' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, but that would increase the size of this fix, while \'sctp.ctl_sock\' still needs to be retrieved from \'net\' structure. | -- | Jan 19, 2025 |
| CVE-2025-21636 | In the Linux kernel, the following vulnerability has been resolved: sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy As mentioned in a previous commit of this series, using the \'net\' structure via \'current\' is not recommended for different reasons: - Inconsistency: getting info from the reader\'s/writer\'s netns vs only from the opener\'s netns. - current->nsproxy can be NULL in some cases, resulting in an \'Oops\' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The \'net\' structure can be obtained from the table->data using container_of(). Note that table->data could also be used directly, as this is the only member needed from the \'net\' structure, but that would increase the size of this fix, to use \'*data\' everywhere \'net->sctp.probe_interval\' is used. | -- | Jan 19, 2025 |
| CVE-2025-21635 | In the Linux kernel, the following vulnerability has been resolved: rds: sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy As mentioned in a previous commit of this series, using the \'net\' structure via \'current\' is not recommended for different reasons: - Inconsistency: getting info from the reader\'s/writer\'s netns vs only from the opener\'s netns. - current->nsproxy can be NULL in some cases, resulting in an \'Oops\' (null-ptr-deref), e.g. when the current task is exiting, as spotted by syzbot [1] using acct(2). The per-netns structure can be obtained from the table->data using container_of(), then the \'net\' one can be retrieved from the listen socket (if available). | -- | Jan 19, 2025 |
| CVE-2025-21634 | In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: remove kernfs active break A warning was found: WARNING: CPU: 10 PID: 3486953 at fs/kernfs/file.c:828 CPU: 10 PID: 3486953 Comm: rmdir Kdump: loaded Tainted: G RIP: 0010:kernfs_should_drain_open_files+0x1a1/0x1b0 RSP: 0018:ffff8881107ef9e0 EFLAGS: 00010202 RAX: 0000000080000002 RBX: ffff888154738c00 RCX: dffffc0000000000 RDX: 0000000000000007 RSI: 0000000000000004 RDI: ffff888154738c04 RBP: ffff888154738c04 R08: ffffffffaf27fa15 R09: ffffed102a8e7180 R10: ffff888154738c07 R11: 0000000000000000 R12: ffff888154738c08 R13: ffff888750f8c000 R14: ffff888750f8c0e8 R15: ffff888154738ca0 FS: 00007f84cd0be740(0000) GS:ffff8887ddc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555f9fbe00c8 CR3: 0000000153eec001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: kernfs_drain+0x15e/0x2f0 __kernfs_remove+0x165/0x300 kernfs_remove_by_name_ns+0x7b/0xc0 cgroup_rm_file+0x154/0x1c0 cgroup_addrm_files+0x1c2/0x1f0 css_clear_dir+0x77/0x110 kill_css+0x4c/0x1b0 cgroup_destroy_locked+0x194/0x380 cgroup_rmdir+0x2a/0x140 It can be explained by: rmdir echo 1 > cpuset.cpus kernfs_fop_write_iter // active=0 cgroup_rm_file kernfs_remove_by_name_ns kernfs_get_active // active=1 __kernfs_remove // active=0x80000002 kernfs_drain cpuset_write_resmask wait_event //waiting (active == 0x80000001) kernfs_break_active_protection // active = 0x80000001 // continue kernfs_unbreak_active_protection // active = 0x80000002 ... kernfs_should_drain_open_files // warning occurs kernfs_put_active This warning is caused by \'kernfs_break_active_protection\' when it is writing to cpuset.cpus, and the cgroup is removed concurrently. The commit 3a5a6d0c2b03 (cpuset: don\'t nest cgroup_mutex inside get_online_cpus()) made cpuset_hotplug_workfn asynchronous, This change involves calling flush_work(), which can create a multiple processes circular locking dependency that involve cgroup_mutex, potentially leading to a deadlock. To avoid deadlock. the commit 76bb5ab8f6e3 (cpuset: break kernfs active protection in cpuset_write_resmask()) added \'kernfs_break_active_protection\' in the cpuset_write_resmask. This could lead to this warning. After the commit 2125c0034c5d (cgroup/cpuset: Make cpuset hotplug processing synchronous), the cpuset_write_resmask no longer needs to wait the hotplug to finish, which means that concurrent hotplug and cpuset operations are no longer possible. Therefore, the deadlock doesn\'t exist anymore and it does not have to \'break active protection\' now. To fix this warning, just remove kernfs_break_active_protection operation in the \'cpuset_write_resmask\'. | -- | Jan 19, 2025 |
| CVE-2025-21633 | In the Linux kernel, the following vulnerability has been resolved: io_uring/sqpoll: zero sqd->thread on tctx errors Syzkeller reports: BUG: KASAN: slab-use-after-free in thread_group_cputime+0x409/0x700 kernel/sched/cputime.c:341 Read of size 8 at addr ffff88803578c510 by task syz.2.3223/27552 Call Trace: <TASK> ... kasan_report+0x143/0x180 mm/kasan/report.c:602 thread_group_cputime+0x409/0x700 kernel/sched/cputime.c:341 thread_group_cputime_adjusted+0xa6/0x340 kernel/sched/cputime.c:639 getrusage+0x1000/0x1340 kernel/sys.c:1863 io_uring_show_fdinfo+0xdfe/0x1770 io_uring/fdinfo.c:197 seq_show+0x608/0x770 fs/proc/fd.c:68 ... That\'s due to sqd->task not being cleared properly in cases where SQPOLL task tctx setup fails, which can essentially only happen with fault injection to insert allocation errors. | -- | Jan 19, 2025 |
| CVE-2025-21632 | In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Ensure shadow stack is active before getting registers The x86 shadow stack support has its own set of registers. Those registers are XSAVE-managed, but they are supervisor state components which means that userspace can not touch them with XSAVE/XRSTOR. It also means that they are not accessible from the existing ptrace ABI for XSAVE state. Thus, there is a new ptrace get/set interface for it. The regset code that ptrace uses provides an ->active() handler in addition to the get/set ones. For shadow stack this ->active() handler verifies that shadow stack is enabled via the ARCH_SHSTK_SHSTK bit in the thread struct. The ->active() handler is checked from some call sites of the regset get/set handlers, but not the ptrace ones. This was not understood when shadow stack support was put in place. As a result, both the set/get handlers can be called with XFEATURE_CET_USER in its init state, which would cause get_xsave_addr() to return NULL and trigger a WARN_ON(). The ssp_set() handler luckily has an ssp_active() check to avoid surprising the kernel with shadow stack behavior when the kernel is not ready for it (ARCH_SHSTK_SHSTK==0). That check just happened to avoid the warning. But the ->get() side wasn\'t so lucky. It can be called with shadow stacks disabled, triggering the warning in practice, as reported by Christina Schimpe: WARNING: CPU: 5 PID: 1773 at arch/x86/kernel/fpu/regset.c:198 ssp_get+0x89/0xa0 [...] Call Trace: <TASK> ? show_regs+0x6e/0x80 ? ssp_get+0x89/0xa0 ? __warn+0x91/0x150 ? ssp_get+0x89/0xa0 ? report_bug+0x19d/0x1b0 ? handle_bug+0x46/0x80 ? exc_invalid_op+0x1d/0x80 ? asm_exc_invalid_op+0x1f/0x30 ? __pfx_ssp_get+0x10/0x10 ? ssp_get+0x89/0xa0 ? ssp_get+0x52/0xa0 __regset_get+0xad/0xf0 copy_regset_to_user+0x52/0xc0 ptrace_regset+0x119/0x140 ptrace_request+0x13c/0x850 ? wait_task_inactive+0x142/0x1d0 ? do_syscall_64+0x6d/0x90 arch_ptrace+0x102/0x300 [...] Ensure that shadow stacks are active in a thread before looking them up in the XSAVE buffer. Since ARCH_SHSTK_SHSTK and user_ssp[SHSTK_EN] are set at the same time, the active check ensures that there will be something to find in the XSAVE buffer. [ dhansen: changelog/subject tweaks ] | -- | Jan 19, 2025 |
| CVE-2025-21631 | In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix waker_bfqq UAF after bfq_split_bfqq() Our syzkaller report a following UAF for v6.6: BUG: KASAN: slab-use-after-free in bfq_init_rq+0x175d/0x17a0 block/bfq-iosched.c:6958 Read of size 8 at addr ffff8881b57147d8 by task fsstress/232726 CPU: 2 PID: 232726 Comm: fsstress Not tainted 6.6.0-g3629d1885222 #39 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x91/0xf0 lib/dump_stack.c:106 print_address_description.constprop.0+0x66/0x300 mm/kasan/report.c:364 print_report+0x3e/0x70 mm/kasan/report.c:475 kasan_report+0xb8/0xf0 mm/kasan/report.c:588 hlist_add_head include/linux/list.h:1023 [inline] bfq_init_rq+0x175d/0x17a0 block/bfq-iosched.c:6958 bfq_insert_request.isra.0+0xe8/0xa20 block/bfq-iosched.c:6271 bfq_insert_requests+0x27f/0x390 block/bfq-iosched.c:6323 blk_mq_insert_request+0x290/0x8f0 block/blk-mq.c:2660 blk_mq_submit_bio+0x1021/0x15e0 block/blk-mq.c:3143 __submit_bio+0xa0/0x6b0 block/blk-core.c:639 __submit_bio_noacct_mq block/blk-core.c:718 [inline] submit_bio_noacct_nocheck+0x5b7/0x810 block/blk-core.c:747 submit_bio_noacct+0xca0/0x1990 block/blk-core.c:847 __ext4_read_bh fs/ext4/super.c:205 [inline] ext4_read_bh+0x15e/0x2e0 fs/ext4/super.c:230 __read_extent_tree_block+0x304/0x6f0 fs/ext4/extents.c:567 ext4_find_extent+0x479/0xd20 fs/ext4/extents.c:947 ext4_ext_map_blocks+0x1a3/0x2680 fs/ext4/extents.c:4182 ext4_map_blocks+0x929/0x15a0 fs/ext4/inode.c:660 ext4_iomap_begin_report+0x298/0x480 fs/ext4/inode.c:3569 iomap_iter+0x3dd/0x1010 fs/iomap/iter.c:91 iomap_fiemap+0x1f4/0x360 fs/iomap/fiemap.c:80 ext4_fiemap+0x181/0x210 fs/ext4/extents.c:5051 ioctl_fiemap.isra.0+0x1b4/0x290 fs/ioctl.c:220 do_vfs_ioctl+0x31c/0x11a0 fs/ioctl.c:811 __do_sys_ioctl fs/ioctl.c:869 [inline] __se_sys_ioctl+0xae/0x190 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x70/0x120 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x78/0xe2 Allocated by task 232719: kasan_save_stack+0x22/0x50 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x87/0x90 mm/kasan/common.c:328 kasan_slab_alloc include/linux/kasan.h:188 [inline] slab_post_alloc_hook mm/slab.h:768 [inline] slab_alloc_node mm/slub.c:3492 [inline] kmem_cache_alloc_node+0x1b8/0x6f0 mm/slub.c:3537 bfq_get_queue+0x215/0x1f00 block/bfq-iosched.c:5869 bfq_get_bfqq_handle_split+0x167/0x5f0 block/bfq-iosched.c:6776 bfq_init_rq+0x13a4/0x17a0 block/bfq-iosched.c:6938 bfq_insert_request.isra.0+0xe8/0xa20 block/bfq-iosched.c:6271 bfq_insert_requests+0x27f/0x390 block/bfq-iosched.c:6323 blk_mq_insert_request+0x290/0x8f0 block/blk-mq.c:2660 blk_mq_submit_bio+0x1021/0x15e0 block/blk-mq.c:3143 __submit_bio+0xa0/0x6b0 block/blk-core.c:639 __submit_bio_noacct_mq block/blk-core.c:718 [inline] submit_bio_noacct_nocheck+0x5b7/0x810 block/blk-core.c:747 submit_bio_noacct+0xca0/0x1990 block/blk-core.c:847 __ext4_read_bh fs/ext4/super.c:205 [inline] ext4_read_bh_nowait+0x15a/0x240 fs/ext4/super.c:217 ext4_read_bh_lock+0xac/0xd0 fs/ext4/super.c:242 ext4_bread_batch+0x268/0x500 fs/ext4/inode.c:958 __ext4_find_entry+0x448/0x10f0 fs/ext4/namei.c:1671 ext4_lookup_entry fs/ext4/namei.c:1774 [inline] ext4_lookup.part.0+0x359/0x6f0 fs/ext4/namei.c:1842 ext4_lookup+0x72/0x90 fs/ext4/namei.c:1839 __lookup_slow+0x257/0x480 fs/namei.c:1696 lookup_slow fs/namei.c:1713 [inline] walk_component+0x454/0x5c0 fs/namei.c:2004 link_path_walk.part.0+0x773/0xda0 fs/namei.c:2331 link_path_walk fs/namei.c:3826 [inline] path_openat+0x1b9/0x520 fs/namei.c:3826 do_filp_open+0x1b7/0x400 fs/namei.c:3857 do_sys_openat2+0x5dc/0x6e0 fs/open.c:1428 do_sys_open fs/open.c:1443 [inline] __do_sys_openat fs/open.c:1459 [inline] __se_sys_openat fs/open.c:1454 [inline] __x64_sys_openat+0x148/0x200 fs/open.c:1454 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_6 ---truncated--- | -- | Jan 19, 2025 |
| CVE-2025-21606 | stats is a macOS system monitor in for the menu bar. The Stats application is vulnerable to a local privilege escalation due to the insecure implementation of its XPC service. The application registers a Mach service under the name `eu.exelban.Stats.SMC.Helper`. The associated binary, eu.exelban.Stats.SMC.Helper, is a privileged helper tool designed to execute actions requiring elevated privileges on behalf of the client, such as setting fan modes, adjusting fan speeds, and executing the `powermetrics` command. The root cause of this vulnerability lies in the `shouldAcceptNewConnection` method, which unconditionally returns YES (or true), allowing any XPC client to connect to the service without any form of verification. As a result, unauthorized clients can establish a connection to the Mach service and invoke methods exposed by the HelperTool interface. An attacker can exploit this vulnerability to modify the hardware settings of the user’s device and execute arbitrary code with root privileges. This issue has been addressed in version 2.11.21 and all users are advised to upgrade. There are no known workarounds for this vulnerability. | -- | Jan 17, 2025 |
| CVE-2025-21399 | Microsoft Edge (Chromium-based) Update Elevation of Privilege Vulnerability | -- | Jan 17, 2025 |
| CVE-2025-21185 | Microsoft Edge (Chromium-based) Elevation of Privilege Vulnerability | -- | Jan 17, 2025 |
| CVE-2025-0590 | Improper permission settings for mobile applications (com.transsion.carlcare) may lead to information leakage risk. | -- | Jan 20, 2025 |
| CVE-2025-0586 | The a+HRD from aEnrich Technology has an Insecure Deserialization vulnerability, allowing remote attackers with database modification privileges and regular system privileges to perform arbitrary code execution. | -- | Jan 20, 2025 |
| CVE-2025-0585 | The a+HRD from aEnrich Technology has a SQL Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary SQL commands to read, modify, and delete database contents. | -- | Jan 20, 2025 |
