Acknowledged
Created: Jun 24, 2025
Updated: Nov 10, 2025
Found In Version: 10.25.33.1
Severity: Standard
Applicable for: Wind River Linux LTS 25
Component/s: BSP
ERROR: fsbl-firmware-2025.1+git-r0 do_configure: Execution of '/buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/temp/run.do_configure.1449505' failed with exit code 1
ERROR: Logfile of failure stored in: /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/temp/log.do_configure.1449505
Log data follows:
| DEBUG: Executing python function extend_recipe_sysroot
| NOTE: Direct dependencies are '/buildarea2/xdong/test/layers/meta-xilinx-tools/recipes-utils/xsct/xsct-native.bb:do_populate_sysroot', '/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/cmake/cmake-native_3.31.6.bb:do_populate_sysroot', '/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/quilt/quilt-native_0.68.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-core/ncurses/ncurses_6.5.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/patch/patch_2.7.6.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/python/python3-pyyaml_6.0.2.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/python/python3_3.13.2.bb:do_populate_sysroot']
( NOTE: Installed into sysroot: [)
| NOTE: Skipping as already exists in sysroot: 'xsct-native', 'gettext-minimal-native', 'cmake-native', 'libtool-native', 'quilt-native', 'texinfo-dummy-native', 'openssl-native', 'expat-native', 'ncurses-native', 'util-linux-libuuid-native', 'zlib-native', 'libedit-native', 'make-native', 'patch-native', 'perl-native', 'pseudo-native', 'python3-build-native', 'python3-cython-native', 'python3-flit-core-native', 'python3-installer-native', 'python3-packaging-native', 'python3-pyproject-hooks-native', 'python3-pyyaml-native', 'python3-setuptools-native', 'python3-wheel-native', 'python3-native', 'bzip2-native', 'libnsl2-native', 'libtirpc-native', 'unzip-native', 'xz-native', 'zstd-native', 'attr-native', 'gdbm-native', 'libffi-native', 'libyaml-native', 'sqlite3-native']
( DEBUG: Python function extend_recipe_sysroot finished
| DEBUG: Executing shell function do_configure
| MISC_ARG is -yamlconf /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/fsbl-firmware.yaml
| APP_ARG is -app "Zynq FSBL"
| Using xsct from: /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/recipe-sysroot-native/Vitis/2025.1/bin/xsct
| cmd is: xsct -sdx -nodisp /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/git/app.tcl -ws /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/git/fsbl-firmware -pname fsbl-firmware -rp /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/git -processor_ip ps7_cortexa9 -hdf /buildarea2/xdong/test/build/tmp/deploy/images/amd-zynq/Xilinx-amd-zynq.xsa -arch 32 -app "Zynq FSBL" -yamlconf /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/fsbl-firmware.yaml
| sed: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/recipe-sysroot-native/usr/lib/libacl.so.1)
| sed: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/recipe-sysroot-native/usr/lib/libacl.so.1)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/recipe-sysroot-native/usr/lib/libreadline.so.8)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/recipe-sysroot-native/usr/lib/libreadline.so.8)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/recipe-sysroot-native/usr/lib/libgmp.so.10)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/recipe-sysroot-native/usr/lib/libncurses.so.5)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/recipe-sysroot-native/usr/lib/libtinfo.so.5)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/recipe-sysroot-native/usr/lib/libtinfo.so.5)
|
| ****** Software Commandline Tool (XSCT) v2025.1.0
| **** SW Build 6135694 on Thu May 15 18:54:54 MDT 2025
| ** Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.
| ** Copyright 2022-2025 Advanced Micro Devices, Inc. All Rights Reserved.
|
|
| Warning: XSCT is deprecated and will be removed in future releases.
| We recommend using the new Python command-line tool for project management and debugging:
| - Run "vitis -i" for interactive mode.
| - Run "vitis -s <script>" for script mode.
| WARNING: Failed in finding /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/recipe-sysroot-native/Vitis/2025.1/data/system-device-tree-xlnx/device_tree/data/device_tree.tcl path.
| WARNING: sdtgen package cannot be loaded. System Device tree commands will not
|
| be available
| INFO: [Hsi 55-2053) elapsed time for repository (/buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/recipe-sysroot-native/Vitis/2025.1/data/embeddedsw) loading 0 seconds
| INFO: Update hw fsbl-firmware_plat project
| Loading the sw platform from /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/git/fsbl-firmware/fsbl-firmware_plat/platform.spr
| Reading the platform : "fsbl-firmware_plat"
| Opening the hardware design, this may take few seconds.
| Failed to generate bsp for application zynq_fsbl
| while executing
| "builtin_platform -addbootdomains "
| (procedure "platform" line 440)
| invoked from within
| "platform create -name $params(hwpname) -hw $params(hdf) -out $params(ws)"
| invoked from within
| "if { $params(ws) ne "" } {
| #Local Work Space available
| if { $params(pname) ne "" } {
| # hwpname/bspname is empty then default it to pname+_hwproj/b..."
| (file "/buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/git/app.tcl" line 141)
| WARNING: exit code 1 from a shell command.
ERROR: Task (/buildarea2/xdong/test/layers/meta-xilinx/meta-xilinx-standalone/recipes-bsp/embeddedsw/fsbl-firmware_2025.1.bb:do_configure) failed with exit code '1'
ERROR: bitstream-extraction-2025.1+git-r0 do_configure: Execution of '/buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/temp/run.do_configure.1450051' failed with exit code 1
ERROR: Logfile of failure stored in: /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/temp/log.do_configure.1450051
Log data follows:
| DEBUG: Executing python function extend_recipe_sysroot
| NOTE: Direct dependencies are '/buildarea2/xdong/test/layers/meta-xilinx-tools/recipes-bsp/hdf/external-hdf_2025.1.bb:do_populate_sysroot', '/buildarea2/xdong/test/layers/meta-xilinx-tools/recipes-utils/xsct/xsct-native.bb:do_populate_sysroot', '/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/quilt/quilt-native_0.68.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-core/ncurses/ncurses_6.5.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/patch/patch_2.7.6.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot']
( NOTE: Installed into sysroot: [)
| NOTE: Skipping as already exists in sysroot: 'external-hdf', 'xsct-native', 'gettext-minimal-native', 'libtool-native', 'quilt-native', 'texinfo-dummy-native', 'ncurses-native', 'patch-native', 'pseudo-native', 'xz-native', 'attr-native', 'sqlite3-native']
( DEBUG: Python function extend_recipe_sysroot finished
| DEBUG: Executing shell function do_configure
| MISC_ARG is -hwpname bitstream-extraction_hwproj -hdf_type xsa
| APP_ARG is
| Using xsct from: /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/Vitis/2025.1/bin/xsct
| cmd is: xsct -sdx -nodisp /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/bitstream-extraction-2025.1+git/bitstream.tcl -ws /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/bitstream-extraction-2025.1+git -pname bitstream-extraction -rp /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/bitstream-extraction-2025.1+git -processor_ip ps7_cortexa9 -hdf /buildarea2/xdong/test/build/tmp/deploy/images/amd-zynq/Xilinx-amd-zynq.xsa -arch 32 -hwpname bitstream-extraction_hwproj -hdf_type xsa
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/usr/lib/libreadline.so.8)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/usr/lib/libreadline.so.8)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/usr/lib/libgmp.so.10)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/usr/lib/libncurses.so.5)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/usr/lib/libtinfo.so.5)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/usr/lib/libtinfo.so.5)
| sed: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/usr/lib/libacl.so.1)
| sed: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/usr/lib/libacl.so.1)
|
| ****** Software Commandline Tool (XSCT) v2025.1.0
| **** SW Build 6135694 on Thu May 15 18:54:54 MDT 2025
| ** Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.
| ** Copyright 2022-2025 Advanced Micro Devices, Inc. All Rights Reserved.
|
|
| Warning: XSCT is deprecated and will be removed in future releases.
| We recommend using the new Python command-line tool for project management and debugging:
| - Run "vitis -i" for interactive mode.
| - Run "vitis -s <script>" for script mode.
| WARNING: Failed in finding /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/Vitis/2025.1/data/system-device-tree-xlnx/device_tree/data/device_tree.tcl path.
| WARNING: sdtgen package cannot be loaded. System Device tree commands will not
|
| be available
| cp: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/usr/lib/libacl.so.1)
| cp: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/recipe-sysroot-native/usr/lib/libacl.so.1)
| while executing
| "exec cp $params(hdf) $project/hardware_description.$params(hdf_type) "
| Failed to open hardware design bitstream-extraction_hwproj/hardware_description.xsa
| while executing
| "error "Failed to open hardware design $project/hardware_description.$params(hdf_type)""
| invoked from within
| "if { [catch {openhw $project/hardware_description.$params(hdf_type)} res) } {
| error "Failed to open hardware design \
| $project/..."
| (file "/buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/bitstream-extraction-2025.1+git/bitstream.tcl" line 34)
| WARNING: exit code 1 from a shell command.
ERROR: Task (/buildarea2/xdong/test/layers/meta-xilinx-tools/recipes-bsp/bitstream/bitstream-extraction_git.bb:do_configure) failed with exit code '1'
ERROR: device-tree-1_2025.1+git-r0 do_configure: Execution of '/buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/temp/run.do_configure.1449500' failed with exit code 1
ERROR: Logfile of failure stored in: /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/temp/log.do_configure.1449500
Log data follows:
| DEBUG: Executing python function extend_recipe_sysroot
| NOTE: Direct dependencies are '/buildarea2/xdong/test/layers/meta-xilinx-tools/recipes-utils/xsct/xsct-native.bb:do_populate_sysroot', '/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/quilt/quilt-native_0.68.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-core/ncurses/ncurses_6.5.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/patch/patch_2.7.6.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/pseudo/pseudo_git.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/python/python3-dtc_1.7.2.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/python/python3-pyyaml_6.0.2.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-devtools/python/python3_3.13.2.bb:do_populate_sysroot', 'virtual:native:/buildarea2/xdong/test/layers/oe-core/meta/recipes-kernel/dtc/dtc_1.7.2.bb:do_populate_sysroot']
( NOTE: Installed into sysroot: [)
| NOTE: Skipping as already exists in sysroot: ['xsct-native', 'gettext-minimal-native', 'cmake-native', 'libtool-native', 'm4-native', 'quilt-native', 'texinfo-dummy-native', 'openssl-native', 'expat-native', 'ncurses-native', 'util-linux-libuuid-native', 'zlib-native', 'flex-native', 'gnu-config-native', 'libedit-native', 'make-native', 'patch-native', 'perl-native', 'pseudo-native', 'python3-build-native', 'python3-cython-native', 'python3-dtc-native', 'python3-flit-core-native', 'python3-installer-native', 'python3-packaging-native', 'python3-pip-native', 'python3-pyparsing-native', 'python3-pyproject-hooks-native', 'python3-pyyaml-native', 'python3-setuptools-scm-native', 'python3-setuptools-native', 'python3-typing-extensions-native', 'python3-wheel-native', 'python3-native', 'swig-native', 'bzip2-native', 'diffutils-native', 'libnsl2-native', 'libtirpc-native', 'unzip-native', 'xz-native', 'zstd-native', 'dtc-native', 'attr-native', 'gdbm-native', 'libffi-native', 'libpcre2-native', 'libyaml-native', 'sqlite3-native']
| DEBUG: Python function extend_recipe_sysroot finished
| DEBUG: Executing shell function do_configure
| MISC_ARG is -hdf_type xsa -yamlconf /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/device-tree.yaml
| APP_ARG is -app "device-tree"
| Using xsct from: /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/Vitis/2025.1/bin/xsct
| cmd is: xsct -sdx -nodisp /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/sources/dtgen.tcl -ws /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/build -pname device-tree -rp /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/sources/git -processor_ip ps7_cortexa9 -hdf /buildarea2/xdong/test/build/tmp/deploy/images/amd-zynq/Xilinx-amd-zynq.xsa -arch 32 -app "device-tree" -hdf_type xsa -yamlconf /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/device-tree.yaml
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/usr/lib/libreadline.so.8)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/usr/lib/libreadline.so.8)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/usr/lib/libgmp.so.10)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/usr/lib/libncurses.so.5)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/usr/lib/libtinfo.so.5)
| awk: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/usr/lib/libtinfo.so.5)
| sed: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/usr/lib/libacl.so.1)
| sed: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/usr/lib/libacl.so.1)
|
| ****** Software Commandline Tool (XSCT) v2025.1.0
| **** SW Build 6135694 on Thu May 15 18:54:54 MDT 2025
| ** Copyright 1986-2022 Xilinx, Inc. All Rights Reserved.
| ** Copyright 2022-2025 Advanced Micro Devices, Inc. All Rights Reserved.
|
|
| Warning: XSCT is deprecated and will be removed in future releases.
| We recommend using the new Python command-line tool for project management and debugging:
| - Run "vitis -i" for interactive mode.
| - Run "vitis -s <script>" for script mode.
| WARNING: Failed in finding /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/Vitis/2025.1/data/system-device-tree-xlnx/device_tree/data/device_tree.tcl path.
| WARNING: sdtgen package cannot be loaded. System Device tree commands will not
|
| be available
| cp: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.38' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/usr/lib/libacl.so.1)
| cp: /lib/x86_64-linux-gnu/libc.so.6: version `GLIBC_2.33' not found (required by /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/recipe-sysroot-native/usr/lib/libacl.so.1)
| while executing
| "exec cp $hdf $project/hardware_description.$hdf_type "
| Failed to open hardware design /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/build/device-tree/hardware_description.xsa
| while executing
| "error "Failed to open hardware design $project/hardware_description.$hdf_type""
| (procedure "set_hw_design" line 8)
| invoked from within
| "set_hw_design $project $params(hdf) $params(hdf_type)"
| (file "/buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/sources/dtgen.tcl" line 24)
| WARNING: exit code 1 from a shell command.
ERROR: Task (/buildarea2/xdong/test/layers/meta-xilinx/meta-xilinx-core/recipes-bsp/device-tree/device-tree.bb:do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 9612 tasks of which 9574 didn't need to be rerun and 3 failed.
Summary: 3 tasks failed:
/buildarea2/xdong/test/layers/meta-xilinx/meta-xilinx-standalone/recipes-bsp/embeddedsw/fsbl-firmware_2025.1.bb:do_configure
log: /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/fsbl-firmware/2025.1+git/temp/log.do_configure.1449505
/buildarea2/xdong/test/layers/meta-xilinx-tools/recipes-bsp/bitstream/bitstream-extraction_git.bb:do_configure
log: /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/bitstream-extraction/2025.1+git/temp/log.do_configure.1450051
/buildarea2/xdong/test/layers/meta-xilinx/meta-xilinx-core/recipes-bsp/device-tree/device-tree.bb:do_configure
log: /buildarea2/xdong/test/build/tmp/work/amd_zynq-wrs-linux-gnueabi/device-tree/2025.1+git/temp/log.do_configure.1449500
Summary: There was 1 WARNING message.
Summary: There were 3 ERROR messages, returning a non-zero exit code.
/lpg-build/cdc/fast_prod/WRL10_25/WRL10_25_GIT/wrlinux-10/setup.sh --machines amd-zynq --distros wrlinux --dl-layers=1 --accept-eula=yes
. environment-setup-x86_64-wrlinuxsdk-linux
. oe-init-build-env
Add the following into conf/local.conf:
IMAGE_FSTYPES:remove = " live hddimg iso"
CUSTOMER_RECIPES:xilinx-standalone += 'embeddedsw-source'
IMAGE_FSTYPES:remove = " live hddimg iso"
CUSTOMER_RECIPES:xilinx += 'bootgen'
CUSTOMER_RECIPES:xilinx += 'u-boot-xlnx'
CUSTOMER_RECIPES:xilinx += 'u-boot-tools-xlnx'
PREFERRED_PROVIDER_u-boot-tools-native = "u-boot-tools-xlnx-native"
CUSTOMER_RECIPES:xilinx += 'u-boot-xlnx-scr'
CUSTOMER_RECIPES:xilinx += 'xilinx-bootbin'
CUSTOMER_RECIPES:xilinx += 'device-tree'
CUSTOMER_RECIPES:xilinx-tools += 'xsct'
CUSTOMER_RECIPES:xilinx += 'fsbl'
CUSTOMER_RECIPES:xilinx-tools += 'external-hdf'
CUSTOMER_RECIPES:xilinx-tools += 'bitstream-extraction'
CUSTOMER_RECIPES:xilinx-standalone += 'fsbl-firmware'
CUSTOMER_RECIPES:xilinx-standalone += 'embeddedsw-source'
IMAGE_INSTALL:append = " xilinx-bootbin"
WRL_ZYNQ_BOOTBIN_TARGET = "zc702"
bitbake wrlinux-image-std
After successful bilding, update the variable WRL_ZYNQ_BOOTBIN_TARGET in the conf/local.conf to the value of zc706.
bitbake wrlinux-image-std
