Wind River Support Network

Description

[   17.649949] fsl,imx8mp-audio-xcvr 42680000.xcvr: failed to get ipg clock
[   17.661481] fsl,imx8mp-audio-xcvr 42680000.xcvr: probe with driver fsl,imx8mp-audio-xcvr failed with error -2

Steps to Reproduce

/lpg-build/cdc/fast_prod/WRL10_25/WRL10_25_GIT/wrlinux-10/setup.sh --machines nxp-imx9 --templates feature/docker feature/kdump feature/kexec --distros wrlinux --dl-layers=1 --accept-eula=yes
source environment-setup-x86_64-wrlinuxsdk-linux
source oe-init-build-env build


echo 'BB_NUMBER_THREADS ?= "24"' >> conf/local.conf
echo 'PARALLEL_MAKE ?= "-j 24"' >> conf/local.conf
bitbake-layers add-layer /net/pek-lpgtest7408/buildarea1/SharedImage/wrlinux-testing-dl/
export https_proxy=147.11.252.42:9090
export http_proxy=147.11.252.42:9090
bitbake-layers add-layer /net/pek-lpgtest16/buildarea1/kliang/lxgit/wassp/WASSP_LINUX_1025/testcases/wrlinux/wr-testing/bts-dev

#####To Clone a whole new testcases layer#####
git clone --depth 1 -b master git://lxgit.wrs.com/wrlinux-testing/testcases.git ../layers/testcases/wrlinux/
bitbake-layers add-layer ../layers/testcases/wrlinux/wr-testing/bts-dev
#####End#####

echo '
require templates/feature/bts/template.conf
IMAGE_FSTYPES += " tar.bz2"
echo 'IMAGE_FSTYPES:remove = " live hddimg iso"' >> conf/local.conf
echo 'BB_NO_NETWORK = '0'
ACCEPT_FSL_EULA = "1"
LICENSE_FLAGS_ACCEPTED:append = " commercial"
CUSTOMER_RECIPES:fsl-bsp-release += 'imx-m33-demos'
BSP_NXP_DERIVED:append:nxp-imx9  = " nxp-imx9"
DISTROOVERRIDES:nxp-imx9 = "fsl fslc"
MACHINEOVERRIDES:prepend:nxp-imx9 = "imx-generic-bsp:imx-nxp-bsp:imxdrm:imxpxp:mx9-generic-bsp:mx9-nxp-bsp:mx93-generic-bsp:mx93-nxp-bsp:use-nxp-bsp:"
IMAGE_INSTALL:append = " imx-boot"
PREFERRED_PROVIDER_virtual/bootloader:mx9-nxp-bsp = "u-boot-imx"
CUSTOMER_RECIPES:fsl-bsp-release += 'u-boot-imx'
CUSTOMER_RECIPES:fsl-bsp-release += 'imx-atf'
CUSTOMER_RECIPES:fsl-bsp-release += 'imx-boot'
CUSTOMER_RECIPES:fsl-bsp-release += 'imx-mkimage'
CUSTOMER_RECIPES:fsl-bsp-release += 'imx-boot-firmware-files'
CUSTOMER_RECIPES:fsl-bsp-release += 'firmware-ele-imx'
IMX_EXTRA_FIRMWARE:mx93-generic-bsp = "imx-boot-firmware-files firmware-ele-imx"
SECOEXT_FIRMWARE_NAME:mx93-generic-bsp   ?= "mx93${IMX_SOC_REV_LOWER}-ahab-container.img"
CUSTOMER_BUILD_BOOTLOADER = "1"
IMX_SOC_REV:mx93-generic-bsp  = "A1"
IMX_SOC_REV_UPPER   = "${@d.getVar('IMX_SOC_REV').upper()}"
IMX_SOC_REV_LOWER   = "${@d.getVar('IMX_SOC_REV').lower()}"
SECO_FIRMWARE_NAME:mx93-generic-bsp   ?= "mx93${IMX_SOC_REV_LOWER}-ahab-container.img"
KERNEL_DEVICETREE_BASENAME = "imx93-11x11-evk"
KERNEL_DEVICETREE:append:use-nxp-bsp = " freescale/${KERNEL_DEVICETREE_BASENAME}-aud-hat.dtb freescale/${KERNEL_DEVICETREE_BASENAME}-boe-wxga-lvds-panel.dtb freescale/${KERNEL_DEVICETREE_BASENAME}-flexio-i2c.dtb freescale/${KERNEL_DEVICETREE_BASENAME}-flexspi-m2.dtb freescale/${KERNEL_DEVICETREE_BASENAME}-i3c.dtb freescale/${KERNEL_DEVICETREE_BASENAME}-i2c-spi-slave.dtb freescale/${KERNEL_DEVICETREE_BASENAME}-lpuart.dtb freescale/${KERNEL_DEVICETREE_BASENAME}-mqs.dtb freescale/${KERNEL_DEVICETREE_BASENAME}-mt9m114.dtb freescale/${KERNEL_DEVICETREE_BASENAME}-rm67199.dtb "
UBOOT_CONFIG_BASENAME = "imx93_11x11_evk"
DDR_FIRMWARE_NAME = " lpddr4_dmem_1d_v202201.bin lpddr4_dmem_2d_v202201.bin lpddr4_imem_1d_v202201.bin lpddr4_imem_2d_v202201.bin "
KERNEL_DEVICETREE = " freescale/${KERNEL_DEVICETREE_BASENAME}.dtb "
UBOOT_DTB_NAME = "${KERNEL_DEVICETREE_BASENAME}.dtb"
IMX_DEFAULT_BOOTLOADER:use-nxp-bsp = "u-boot-imx"
IMX_DEFAULT_BOOTLOADER:use-mainline-bsp = "u-boot-fslc"
LOADADDR = ""
UBOOT_SUFFIX = "bin"
UBOOT_MAKE_TARGET = ""
SPL_BINARY = "spl/u-boot-spl.bin"
UBOOT_CONFIG ??= "mx93evk"
UBOOT_CONFIG[mx93evk]   = "${UBOOT_CONFIG_BASENAME}_defconfig,sdcard"
ATF_PLATFORM = "imx93"
IMXBOOT_TARGETS = "flash_singleboot"
IMX_BOOT_SOC_TARGET = "iMX9"
IMX_BOOT_SEEK = "32"
SERIAL_CONSOLES = "115200;ttyLP0"
IMX_DEFAULT_BSP = "nxp"
CUSTOMER_RECIPES:fsl-bsp-release += 'nxp-wlan-sdk'
CUSTOMER_RECIPES:fsl-bsp-release += 'kernel-module-nxp-wlan'
CUSTOMER_RECIPES:fsl-bsp-release += 'wireless-tools'
IMAGE_INSTALL:append = " nxp-wlan-sdk kernel-module-nxp-wlan udev-extraconf"' >> conf/local.conf
bitbake wrlinux-image-std