Wind River Support Network

Description

root@nxp-imx6:/opt/wr-test/testcases/bts/bootcheck_exception# cat /opt/wr-test/original_status/dmesg.log |grep -v firmware |grep -i -B10 -A10 "failed with error" || return 0
[    4.255678] ldb ldb: Failed to create device link (0x180) with 2800000.ipu
[    4.263768] mxc_mipi_dsi 21e0000.mipi: i.MX MIPI DSI driver probed
[    4.269863] mxc_sdc_fb fb@0: registered mxc display driver ldb
[    4.307186] imx-ipuv3 2800000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[    4.360236] Console: switching to colour frame buffer device 128x48
[    4.403917] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[    4.410586] fbcvt: 1920x1080@60: CVT Name - 2.073M9
[    4.414680] mxc_sdc_fb fb@1: registered mxc display driver hdmi
[    4.468403] mxc_sdc_fb fb@2: registered mxc display driver lcd
[    4.472952] mxc_sdc_fb fb@2: ipu0-di0 already in use
[    4.476640] mxc_sdc_fb fb@2: probe with driver mxc_sdc_fb failed with error -16
[    4.483271] mxc_sdc_fb fb@3: registered mxc display driver ldb
[    4.545615] fec 2188000.ethernet eth0: registered PHC device 0
[    4.560441] ci_hdrc ci_hdrc.0: EHCI Host Controller
[    4.564139] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[    4.587238] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[    4.595100] hub 1-0:1.0: USB hub found
[    4.597774] hub 1-0:1.0: 1 port detected
[    4.604262] imx_usb 2184200.usb: No over current polarity defined
[    4.614898] ci_hdrc ci_hdrc.1: EHCI Host Controller
[    4.618621] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
+++++++++++++++++++++++++++++++++++

Steps to Reproduce

/lpg-build/cdc/fast_prod/WRL10_25/WRL10_25_GIT/wrlinux-10/setup.sh --machines nxp-imx6 --templates feature/docker feature/kdump feature/kexec --distros wrlinux --dl-layers=1 --accept-eula=yes
source environment-setup-x86_64-wrlinuxsdk-linux
source oe-init-build-env build


echo 'BB_NUMBER_THREADS ?= "24"' >> conf/local.conf
echo 'PARALLEL_MAKE ?= "-j 24"' >> conf/local.conf
bitbake-layers add-layer /net/pek-lpgtest16/buildarea1/kliang/lxgit/wassp/WASSP_LINUX_1025/testcases/wrlinux/wr-testing/bts-dev

#####To Clone a whole new testcases layer#####
git clone --depth 1 -b master git://lxgit.wrs.com/wrlinux-testing/testcases.git ../layers/testcases/wrlinux/
bitbake-layers add-layer ../layers/testcases/wrlinux/wr-testing/bts-dev
#####End#####

echo '
require templates/feature/bts/template.conf
IMAGE_FSTYPES += " tar.bz2"
echo 'IMAGE_FSTYPES:remove = " live hddimg iso"' >> conf/local.conf
bitbake wrlinux-image-std


share image:
http://pek-lpgtest7408.wrs.com/buildarea1/SharedImage/LTS25/BSP/nxp-imx6_standard_glibc-std_GIT/20250606_203614