Fixed
Created: Sep 27, 2016
Updated: Sep 8, 2018
Resolved Date: Oct 18, 2016
Found In Version: 7.0.0.0.LB20
Fix Version: 7.0.0.21
Severity: Standard
Applicable for: Wind River Linux 7
Component/s: Toolchain
Build intel-x86-64 bsp with "--enable-multilib=lib32", try to boot up intel_cougar_canyon(vlan6) (barcode:19389), will return the following error messages:
sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
Switched to clocksource tsc
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
ata4: SATA link down (SStatus 0 SControl 300)
IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
ata5: SATA link down (SStatus 0 SControl 300)
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:02:00.0 eth1: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Sending DHCP requests .
e1000e: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
e1000e 0000:02:00.1 eth2: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
.
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
., OK
IP-Config: Got DHCP answer from 128.224.167.20, my address is 128.224.167.67
IP-Config: Complete:
device=eth0, hwaddr=00:13:20:f9:61:95, ipaddr=128.224.167.67, mask=255.255.
254.0, gw=128.224.166.1
host=128.224.167.67, domain=pek-tuxlab2.wrs.com, nis-domain=(none)
bootserver=128.224.167.20, rootserver=128.224.167.20, rootpath=
nameserver0=128.224.160.11, nameserver1=147.11.100.30, nameserver2=147.11.1
.11
ALSA device list:
No soundcards found.
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
VFS: Mounted root (nfs filesystem) on device 0:15.
devtmpfs: mounted
Freeing unused kernel memory: 1284K (ffffffff82118000 - ffffffff82259000)
Write protecting the kernel read-only data: 16384k
Freeing unused kernel memory: 1588K (ffff880001a73000 - ffff880001c00000)
Freeing unused kernel memory: 88K (ffff880001fea000 - ffff880002000000)
request_module: runaway loop modprobe binfmt-464c
Starting init: /sbin/init exists but couldn't execute it (error -8)
request_module: runaway loop modprobe binfmt-464c
Starting init: /bin/sh exists but couldn't execute it (error -8)
Kernel panic - not syncing: No working init found. Try passing init= option to
kernel. See Linux Documentation/init.txt for guidance.
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.14.39ltsi-WR7.0.0.20_standard #1
Hardware name: Intel Corporation SandyBridge Platform/TBD, BIOS CCRCG1.86C.0007.
P00.1101111948 01/11/2011
ffff8801002e7f48 ffff8801002e7eb8 ffffffff81a5efbb ffffffff81ebd130
ffff8801002e7f38 ffffffff81a5d4cf ffff880000000008 ffff8801002e7f48
ffff8801002e7ee0 ffffffff81a59a50 0000000000000046 0000000000000000
Call Trace:
[<ffffffff81a5efbb>] dump_stack+0x4e/0x7a
[<ffffffff81a5d4cf>] panic+0xc0/0x1b8
[<ffffffff81a59a50>] ? rest_init+0x90/0x90
[<ffffffff81a59a50>] ? rest_init+0x90/0x90
[<ffffffff81a59b3e>] kernel_init+0xee/0xf0
[<ffffffff81a6ee88>] ret_from_fork+0x58/0x90
[<ffffffff81a59a50>] ? rest_init+0x90/0x90
Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000
-0xffffffff9fffffff)
drm_kms_helper: panic occurred, switching back to text console
1) Build project with following command:
/net/pek-lpggp5.wrs.com/buildarea1/product/wrlinux70RCPL/RCPL0020_LX02/wrlinux-7/wrlinux/configure --enable-board=intel-x86-64 --enable-kernel=standard --enable-rootfs=glibc-small --enable-jobs=6 --enable-parallel-pkgbuilds=6 --enable-reconfig --enable-multilib=lib32 && make fs -j 10
