Wind River Support Network

HomeDefectsLIN5-4406
Fixed

LIN5-4406 : RIP(Routing information Protocol) test failed

Created: Oct 23, 2013    Updated: Dec 19, 2017
Resolved Date: Dec 17, 2013
Found In Version: 5.0.1
Fix Version: 5.0.1.11
Severity: Severe
Applicable for: Wind River Linux 5
Component/s: Networking

Description

When testing rip(routing information protocol), the board can not learn the route information from other board.
Both kontron and ti-335x have this issue.
No this issue in previous version

Steps to Reproduce

there are 2 boards, each board has 2 NICs, the IP address are not in the same subnet.
on board 1:
zebra -d
ripd -d
echo 1 > /proc/sys/net/ipv4/ip_forward
on board2:
zebra -d
ripd -d
echo 1 > /proc/sys/net/ipv4/ip_forward
telnet localhost 2602
zebra
en
conf term
no router rip
end
sh ip rip
conf term
router rip
network 128.224.178.0/23
redistribute connected
end
sh ip rip
It should show the IP route from other board.
The attached is the RIP test document

Other Downloads


Live chat
Online