Wind River Support Network

HomeDefectsLIN5-4312
Fixed

LIN5-4312 : [WRlinux 5.0.1 Async]lsi-acp34xx:PCIe failure on preempt-rt/cgl kernel

Created: May 23, 2013    Updated: Mar 2, 2018
Resolved Date: May 29, 2013
Found In Version: 5.0.1
Fix Version: 5.0.1.4
Severity: Critical
Applicable for: Wind River Linux 5
Component/s: BSP - Async

Description

NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)                              
Bad block table found at page 524224, version 0x01                                                            
Bad block tabl                                                                                                
e found at page 524160, version 0x01                                                                          
nand_read_bbt: bad block at 0x0000037e0000                                                                    
nand_read_bbt: bad block at 0x000003b40000                                                                    
nand_read_bbt: bad block at 0x000003b80000                                                                    
nand_read_bbt: bad block at 0x000003ee0000                                                                    
nand_read_bbt: bad block at 0x000006c20000                                                                    
nand_read_bbt: bad block at 0x00000bea0000                                                                    
nand_read_bbt: bad block at 0x00000f0c0000                                                                    
nand_read_bbt: bad block at 0x00000f100000                                                                    
nand_read_bbt: bad block at 0x00000f240000                                                                    
nand_read_bbt: bad block at 0x000012ee0000                                                                    
nand_read_bbt: bad block at 0x00001da20000                                                                    
nand_read_bbt: bad block at 0x000021920000                                                                    
nand_read_bbt: bad block at 0x000033720000                                                                    
nand_read_bbt: bad block at 0x00003f180000                                                                    
10 ofpart partitions found on MTD device acp-nand                                                             
Creating 10 MTD partitions on "acp-nand":                                                                     
0x000000000000-0x000000080000 : "2nd Stage"                                                                   
0x000000080000-0x000000100000 : "env-0"                                                                       
0x000000100000-0x000000180000 : "env-1"                                                                       
0x000000280000-0x000000380000 : "3rd Stage"                                                                   
0x000000280000-0x000000800000 : "linux"                                                                       
0x000000800000-0x000000900000 : "linux_dtb"                                                                   
0x000000900000-0x00001fa00000 : "linux_fs"                                                                    
0x00001fa00000-0x000021a00000 : "ose"                                                                         
0x000021a00000-0x000022a00000 : "ose backup"                                                                  
0x000022a00000-0x000040000000 : "ose storage"                                                                 
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI                                                         
e100: Copyright(c) 1999-2006 Intel Corporation                                                                
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI                                              
e1000: Copyright (c) 1999-2006 Intel Corporation.                                                             
e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-k                                                            
e1000e: Copyright(c) 1999 - 2012 Intel Corporation.                                                           
e1000e 0000:01:00.0: Disabling ASPM  L1                                                                       
e1000e 0000:01:00.0: enabling device (0000 -> 0002)                                                           
e1000e 0000:01:00.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:01:00.0: (unregistered net_device): Failed to initialize MSI interrupts.  Falling back to legacy interrupts.
e1000e 0000:01:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:15:17:ef:c2:b5                                   
e1000e 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection                                               
e1000e 0000:01:00.0: eth0: MAC: 1, PHY: 4, PBA No: D28777-005                                                 
acp-femac: LSI(R) 10/100 Network Driver - version 2013-04-30                                                  
acp-femac-mdio: probed                                                                                        
acp-femac 2000480000.femac: eth1: attached PHY driver [Generic PHY] (mii_bus:phy_addr=2000480000.femac:00, irq=-1)
acp-femac: PHY initialized successfully                                                                       
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver                                                    
ci13612-ehci 20004a0000.usb: CI13612A EHCI USB Host Controller                                                
ci13612-ehci 20004a0000.usb: new USB bus registered, assigned bus number 1                                    
ehci-ci13612 (ci13612_usb_setup): VUSB_HS_TX_BURST = 0x4, USB_TXFIFOTHRES = 0x2                               
ci13612-ehci 20004a0000.usb: irq 31, io mem 0x20004a0000                                                      
ehci_r                                                                                                        
un: port_status = 0x8c000000                                                                                  
ci13612-ehci 20004a0000.usb: USB 2.0 started, EHCI 1.00                                                       
hub 1-0:1.0: USB hub found                                                                                    
hub 1-0:1.0: 1 port detected                                                                                  
Initializing USB Mass Storage driver...                                                                       
usbcore: registered new interface driver usb-storage                                                          
USB Mass Storage support registered.                                                                          
mousedev: PS/2 mouse device common for all mice                                                               
i2c /dev entries driver                                                                                       
/plb/opb/i2c@00403000: adapter has been added                                                                 
at24 0-0050: 128 byte 24c01 EEPROM, writable, 1 bytes/write                                                   
booke_wdt: powerpc book-e watchdog driver loaded                                                              
md: linear personality registered for level -1                                                                
md: raid0 personality registered for level 0                                                                  
md: raid1 personality registered for level 1                                                                  
md: raid10 personality registered for level 10                                                                
md: multipath personality registered for level -4                                                             
usb 1-1: new high-speed USB device number 2 using ci13612-ehci                                                
md: faulty personality registered for level -5                                                                
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialise                                                    
d: dm-devel@redhat.com                                                                                        
device-mapper: multipath: version 1.3.0 loaded                                                                
device-mapper: multipath round-robin: version 1.0.0 loaded                                                    
usbcore: registered new interface driver usbhid                                                               
usbhid: USB HID core driver                                                                                   
oprofile: using timer interrupt.                                                                              
scsi0 : usb-storage 1-1:1.0                                                                                   
TCP: cubic registered                                                                                         
NET: Registered protocol family 10                                                                            
IPv6 over IPv4 tunneling driver                                                                               
NET: Registered protocol family 17                                                                            
L2TP core driver, V2.0                                                                                        
Registering the dns_resolver key type                                                                         
kmemleak: Kernel memory leak detector initialized                                                             
kmemleak: Automatic memory scanning thread started                                                            
console [netcon0] enabled                                                                                     
netconsole: network logging started                                                                           
ADDRCONF(NETDEV_UP): eth0: link is not ready                                                                  
scsi 0:0:0:0: Direct-Access     FLASH    Drive UT_USB20   0.00 PQ: 0 ANSI: 2                                  
sd 0:0:0:0: [sda] 7892087 512-byte logical blocks: (4.04 GB/3.76 GiB)                                         
sd 0:0:0:0: [sda] Write Protect is off                                                                        
sd 0:0:0:0: [sda] Asking for cache data failed                                                                
sd 0:0:0:0: [sda] Assuming drive cache: write through                                                         
sd 0:0:0:0: [sda] Asking for cache data failed                                                                
sd 0:0:0:0: [sda] Assuming drive cache: write through                                                         
 sda: unknown partition table                                                                                 
sd 0:0:0:0: [sda] Asking for cache data failed                                                                
sd 0:0:0:0: [sda] Assuming drive cache: write through                                                         
sd 0:0:0:0: [sda] Attached SCSI removable disk                                                                
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready                                                             
IP-Config: Complete:                                                                                          
     device=eth0, addr=128.224.178.113, mask=255.255.254.0, gw=128.224.178.1                                  
     host=lsi-acp3400-5, domain=, nis-domain=(none)                                                           
     bootserver=128.224.153.26, rootserver=128.224.153.26, rootpath=                                          
md: Waiting for all devices to be available before autodetect                                                 
md: If you don't use raid, use raid=noautodetect                                                              
md: Autodetecting RAID arrays.                                                                                
md: Scanned 0 and added 0 devices.                                                                            
md: autorun ...                                                                                               
md: ... autorun DONE.                                                                                         
VFS: Mounted root (nfs filesystem) on device 0:13.                                                            
devtmpfs: mounted                                                                                             
Freeing unused kernel memory: 684k freed                                                                      
SELinux:  Disabled at runtime.                                                                                
type=1404 audit(23.160:2): selinux=0 auid=4294967295 ses=4294967295                                           
                                                                                                              
INIT: version 2.88 booting                                                                                    
                                                                                                              
Starting udev                                                                                                 
udev[104]: starting version 164                                                                               
NETDEV WATCHDOG: eth0 (e1000e): transmit queue 0 timed out                                                    
------------[ cut here ]------------                                                                          
WARNING: at /lsi_acp34xx/BUILD/WRLinuxPenguin_5.0.1-WIND00410000_lsi_acp34xx_RCPL14/15973/bitbake_build/tmp/work/lsi_acp34xx-wrs-linux/linux-windriver-3.4-r0/linux/net/sched/sch_generic.c:256
                                                                                                              
Modules linked in:                                                                                            
NIP: c09aac90 LR: c09aac90 CTR: c08a3360                                                                      
REGS: ef901dd0 TRAP: 0700   Not tainted  (3.4.34-grsec-WR5.0.1.4_cgl)                                         
MSR: 00029000 <CE,EE,ME>  CR: 24002082  XER: 00000007                                                         
TASK = ef8f8000[9] 'ksoftirqd/1' THREAD: ef900000 CPU: 1                                                      
GPR00: c09aac90 ef901e80 ef8f8000 00000041 00021000 ffffffff c0823414 00020000                                
GPR08: 0001ffff c0d92100 00000000 00000000 84002022 00000000 00000101 c0bc3af8                                
GPR16: 00000001 ef8f2e14 ef8f2c14 ef8f2a14 c0d80000 00000000 ffffff02 eeefc000                                
GPR24: ffffffff 00000001 00000004 eee53e80 c0d80000 c0d90000 eeefc294 eeefc000                                
NIP [c09aac90] dev_watchdog+0x2a4/0x2f8                                                                       
LR [c09aac90] dev_watchdog+0x2a4/0x2f8                                                                        
Call Trace:                                                                                                   
[ef901e80] [c09aac90] dev_watchdog+0x2a4/0x2f8 (unreliable)                                                   
[ef901eb0] [c043a5d0] run_timer_softirq+0x150/0x3e8                                                           
[ef901f20] [c0430e68] __do_softirq+0x10c/0x2a0                                                                
[ef901f80] [c0431104] run_ksoftirqd+0x108/0x1c8                                                               
[ef901fb0] [c0450d4c] kthread+0x90/0x94                                                                       
[ef901ff0] [c040fb8c] original_kernel_threa                                                                   
d+0x4c/0x68                                                                                                   
Instruction dump:                                                                                             
4e800421 815f02a4 4bffff40 7fe3fb78 90c10008 4bfe6515 7fe4fb78 7c651b78                                       
80c10008 3c60c0c4 3863f8ec 480ef841 <0fe00000> 38000001 981c3a9f 4bffffb4                                     
---[ end trace 1931ef1929767791 ]---                                                                          
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.1                                                                                         
53.26 not responding, still trying                                                                            
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
udevd[104]: worker [112] unexpectedly returned with status 0x010                                              
0                                                                                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [112] failed while handling '/devices/virtual/block/ram1'                                  
                                                                                                              
                                                                                                              
udevd[104]: worker [108] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [108] failed while handling '/devices/pci0000:00/0000:00:00.0/0000:01:00.0/net/eth0'       
                                                                                                              
                                                                                                              
udevd[104]: worker [110] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [110] failed while handling '/devices/virtual/block/ram12'                                 
                                                                                                              
                                                                                                              
udevd[104]: worker [114] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [114] failed while handling '/devices/virtual/block/ram10'                                 
                                                                                                              
                                                                                                              
udevd[104]: worker [118] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [118] failed while handling '/devices/virtual/block/ram11'                                 
                                                                                                              
                                                                                                              
udevd[104]: worker [120] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [120] failed while handling '/devices/virtual/block/ram13'                                 
                                                                                                              
                                                                                                              
udevd[104]: worker [129] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worke                                                                                             
r [129] failed while handling '/devices/virtual/block/ram14'                                                  
                                                                                                              
                                                                                                              
udevd[104]: worker [131] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [131] failed while handling '/devices/virtual/block/ram15'                                 
                                                                                                              
                                                                                                              
                                                                                                              
udevadm settle - timeout of 180 seconds reached, the event queue contains:                                    
udevd[104]: worker [132] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [132] failed while handling '/devices/virtual/block/ram2'                                  
                                                                                                              
                                                                                                              
udevd[104]: worker [133] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [133] failed while handling '/devices/virtual/block/ram3'                                  
                                                                                                              
                                                                                                              
udevd[104]: worker [134] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [134] failed while handling '/devices/virtual/block/ram4'                                  
                                                                                                              
                                                                                                              
udevd[104]: worker [135] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [135] failed while handling '/devices/virtual/block/ram5'                                  
                                                                                                              
                                                                                                              
udevd[104]: worker [137] unexpectedly returned with status 0x                                                 
0100                                                                                                          
                                                                                                              
                                                                                                              
udevd[104]: worker [137] failed while handling '/devices/virtual/block/ram6'                                  
                                                                                                              
                                                                                                              
udevd[104]: worker [139] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [139] failed while handling '/devices/virtual/block/ram7'                                  
                                                                                                              
                                                                                                              
udevd[104]: worker [140] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [140] failed while handling '/devices/virtual/block/ram8'                                  
                                                                                                              
                                                                                                              
udevd[104]: worker [141] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [141] failed while handling '/devices/virtual/block/ram9'                                  
                                                                                                              
                                                                                                              
udevd[104]: worker [153] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [153] failed while handling '/devices/virtual/mtd/mtd0/mtdblock0'                          
                                                                                                              
                                                                                                              
udevd[104]: worker [157] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [157] failed while handling '/devices/virtual/mtd/mtd2/mtdblock2'                          
                                                                                                              
                                                                                                              
udevd[104]: worker [160] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [160] fail                                                                                 
ed while handling '/devices/virtual/mtd/mtd1/mtdblock1'                                                       
                                                                                                              
                                                                                                              
udevd[104]: worker [167] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [167] failed while handling '/devices/virtual/mtd/mtd3/mtdblock3'                          
                                                                                                              
                                                                                                              
udevd[104]: worker [173] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [173] failed while handling '/devices/virtual/mtd/mtd4/mtdblock4'                          
                                                                                                              
                                                                                                              
udevd[104]: worker [177] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [177] failed while handling '/devices/virtual/mtd/mtd5/mtdblock5'                          
                                                                                                              
                                                                                                              
udevd[104]: worker [183] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [183] failed while handling '/devices/virtual/mtd/mtd6/mtdblock6'                          
                                                                                                              
                                                                                                              
udevd[104]: worker [185] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [185] failed while handling '/devices/virtual/mtd/mtd7/mtdblock7'                          
                                                                                                              
                                                                                                              
udevd[104]: worker [191] unexpectedly returned with status 0x0100                                             
                                                                                                              
                                                                                                              
udevd[104]: worker [191] failed while handling '/devices/virtual/mtd/mtd8/mtdblock8'                          
                                                                                                              
                                                                                                              
udevd[104]                                                                                                    
: worker [193] unexpectedly returned with status 0x0100                                                       
                                                                                                              
                                                                                                              
udevd[104]: worker [193] failed while handling '/devices/virtual/mtd/mtd9/mtdblock9'                          
                                                                                                              
                                                                                                              
udevd[104]: worker [202] unexpectedly returned with status 0x0100                                             
  /sys/devices/plb.0/opb.1/2000480000.femac/net/eth1 (966)                                                    
                                                                                                              
                                                                                                              
  /sys/devices/plb.0/opb.1/20004a0000.usb/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0 (975)                    
  /sys/devices/plb.0/opb.1/20004a0000.usb/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/block/sda (976)          
  /sys/devices/plb.0/opb.1/20004a0000.usb/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/bsg/0:0:0:0 (977)        
  /sys/devices/plb.0/opb.1/20004a0000.usb/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_device/0:0:0:0 (978)
  /sys/devices/plb.0/opb.1/20004a0000.usb/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_disk/0:0:0:0 (979)  
  /sys/devices/virtual/block/md0 (1674)                                                                       
udevd[104]: worker [202] failed while handling '/devices/virtual/block/md0'                                   
                                                                                                              
                                                                                                              
Starting Bootlog daemon: bootlogd.                                                                            
                                                                                                              
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
EXT4-fs (sda): VFS: Can't find ext4 filesystem                                                                
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 OK                                                                                 
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 OK                                                                                 
EXT3-fs (sda): error: can't find ext3 filesystem on dev sda.                                                  
EXT2-fs (sda): error: can't find an ext2 filesystem on dev sda.                                               
FAT-fs (sda): bogus number of reserved sectors                                                                
FAT-fs (sda): Can't find a valid FAT filesystem                                                               
VFS: Can't find a Minix filesystem V1 | V2 | V3 on device sda.                                                
cramfs: wrong magic                                                                                           
yaffs: dev is 8388608 name is "sda" rw                                                                        
yaffs: passed flags ""                                                                                        
yaffs: dev is 8388608 name is "sda" rw                                                                        
yaffs: passed flags ""                                                                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
kmemleak: 1064 new suspected memory leaks (see /sys/kernel/debug/kmemleak)                                    
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 OK                                                                                 
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
nfs: server 128.224.153.26 not responding, still trying                                                       
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 OK                                                                                 
e1000e 0000:01:00.0: eth0: Reset adapter                                                                      
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx                                        
nfs: server 128.224.153.26 OK               

Steps to Reproduce

1.Build a preempt-rt or CGL kernel with following option:

CONFIG_E1000E=y

2.Boot kernel

Other Downloads


Live chat
Online