Wind River Support Network

HomeDefectsLIN5-18808
Fixed

LIN5-18808 : spi-layout-tools-native_1.0.1-rc3.bb, do_compile failed on intel-quark when testing with SSTATE

Created: May 26, 2014    Updated: Dec 19, 2017
Resolved Date: Dec 9, 2014
Found In Version: 5.0.1.15
Fix Version: 5.0.1.22
Severity: Standard
Applicable for: Wind River Linux 5
Component/s: BSP - Async

Description

NOTE: recipe spi-layout-tools-native-1.0.1-rc3-r0: task do_compile: Started
ERROR: Function failed: do_compile (see /21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/temp/do_compile/log.do_compile.28918 for further information)
ERROR: Logfile of failure stored in: /21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/temp/do_compile/log.do_compile.28918
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -e MAKEFLAGS= BASETOOLS=/21625/bitbake_build/tmp/sysroots/x86_64-linux/opt/BaseTools/BinWrappers/PosixLike LAYOUTFILE=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3/layout.conf RAMFS_ORIG=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage/initramfs.cpio.lzma INF_DIR=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage/inf RAMFS_OUTPUT_DIR=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage KEYFILE=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage/config/key.pem -C /21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3 clean
| |       ----------------------
| | List of sub-directories with a layout.conf file:
| |       ----------------------
| ---------------------
| | FV_MODULES directory (for recovery stage2) = FV/FlashModules
| ---------------------
| make: Entering directory `/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3'
| rm -f initramfs_new.cpio initramfs_new.cpio.gz initramfs_new.cpio.lzma
| rm -f -r initramfs.dir
| rm -f .txt .map \
| 	   image.ffs \
| 	    \
| 	 \
| 	layout.mk Flash-missingPDAT.bin Flash+PlatformData.bin image_info.txt CapsuleComponents.ini mfh.bin Flash-missingPDAT.cap FVMAIN.fv
| rm -f  FV/FlashModules/EDKII_BOOT_STAGE2_RECOVERY.Fv.SVN
| rm -f -r install
| rm -f FV/FlashModules/EDKII_BOOT_STAGE2_RECOVERY.Fv.signed
| make: Leaving directory `/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3'
| NOTE: make -e MAKEFLAGS= BASETOOLS=/21625/bitbake_build/tmp/sysroots/x86_64-linux/opt/BaseTools/BinWrappers/PosixLike LAYOUTFILE=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3/layout.conf RAMFS_ORIG=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage/initramfs.cpio.lzma INF_DIR=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage/inf RAMFS_OUTPUT_DIR=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage KEYFILE=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage/config/key.pem -C /21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3 layout.mk
| |       ----------------------
| | List of sub-directories with a layout.conf file:
| |       ----------------------
| ---------------------
| | FV_MODULES directory (for recovery stage2) = FV/FlashModules
| ---------------------
| make: Entering directory `/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3'
| .//generator/generator.py /21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3/layout.conf -M
| Found boot_index=0 in section boot_stage1_image1
| # When building on NFS with high precision timestamps you
| # might see a harmless "clock skew" warning. If that bothers
| # you then enable the next line:
| # usleep 100000 || sleep 1
| make: Leaving directory `/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3'
| NOTE: make -e MAKEFLAGS= BASETOOLS=/21625/bitbake_build/tmp/sysroots/x86_64-linux/opt/BaseTools/BinWrappers/PosixLike LAYOUTFILE=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3/layout.conf RAMFS_ORIG=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage/initramfs.cpio.lzma INF_DIR=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage/inf RAMFS_OUTPUT_DIR=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage KEYFILE=/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/sysimage/config/key.pem -C /21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3
| ---------------------
| | FV_MODULES directory (for recovery stage2) = /21625/bitbake_build/tmp/sysroots/intel-quark/opt/edk2/Build/QuarkPlatform/DEBUG_GCC46/FV/FlashModules
| ---------------------
| make: Entering directory `/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3'
| ccache gcc -isystem/21625/bitbake_build/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe -isystem/21625/bitbake_build/tmp/sysroots/x86_64-linux/usr/include  -c -o asset-signing-tool/sign.o asset-signing-tool/sign.c
| ccache gcc -isystem/21625/bitbake_build/tmp/sysroots/x86_64-linux/usr/include -O2 -pipe -L/21625/bitbake_build/tmp/sysroots/x86_64-linux/usr/lib -L/21625/bitbake_build/tmp/sysroots/x86_64-linux/lib -Wl,-rpath-link,/21625/bitbake_build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath-link,/21625/bitbake_build/tmp/sysroots/x86_64-linux/lib -Wl,-rpath,/21625/bitbake_build/tmp/sysroots/x86_64-linux/usr/lib -Wl,-rpath,/21625/bitbake_build/tmp/sysroots/x86_64-linux/lib -Wl,-O1 asset-signing-tool/sign.o -lcrypto -o asset-signing-tool/sign
| make: *** No rule to make target `/21625/bitbake_build/tmp/sysroots/intel-quark/opt/edk2/Build/QuarkPlatform/DEBUG_GCC46/FV/FlashModules/EDKII_RECOVERY_IMAGE1.Fv', needed by `EDKII_RECOVERY_IMAGE1.Fv'.  Stop.
| make: Leaving directory `/21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/spi-flash-tools_v1.0.1-rc3'
| ERROR: oe_runmake failed
| WARNING: /21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/temp/do_compile/run.do_compile.28918:125 exit 1 from
|   exit 1
| ERROR: Function failed: do_compile (see /21625/bitbake_build/tmp/work/x86_64-linux/spi-layout-tools-native-1.0.1-rc3-r0/temp/do_compile/log.do_compile.28918 for further information)
NOTE: recipe spi-layout-tools-native-1.0.1-rc3-r0: task do_compile: Failed
ERROR: Task 1395 (/21625/layers/wr-bsps/intel-quark/recipes-support/spi-layout-tools/spi-layout-tools-native_1.0.1-rc3.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 3751 tasks of which 3112 didn't need to be rerun and 1 failed.

Steps to Reproduce

on ala-lpd-test2.wrs.com

1)/data/fast_prod/wrlinux50115/lx03_12sp/wrlinux-5/wrlinux/configure --enable-jobs=16 --enable-parallel-pkgbuilds=16 --enable-rootfs=glibc-std --enable-kernel=standard --with-template=feature/secure-boot,feature/devl-debug,feature/intel-wilkinpeak2, --with-layer=wr-intel-support, --enable-checkout-all-layers=yes --with-ccache-dir=/buildarea/fast_prod/ccache_dir_501 --with-sstate-dir=/buildarea/fast_prod/sstate_dir_501 --enable-ccache=yes --enable-board=intel_quark --enable-patchresolve=noop --with-rcpl-version=0015 

2) make fs

Other Downloads


Live chat
Online