Wind River Support Network

Description

1. Build project.
setup.sh --machines=xilinx-zynqmp --templates feature/test --accept-eula=yes --dl-layers

. ./oe-init-build-env build_test

bitbake-layers add-layer wrlinux/wr-testing/kts-dev echo "WRTEMPLATE_append = \" feature/ltp feature/test\"" >> conf/local.conf

bitbake wrlinux-image-glibc-std

2. Boot up the BSP target (#28570)

3. Run the following commands on the target /opt/ltp/wrLinux_ltp/wr-runltp -f commands


...
<<<test_start>>>
tag=mkswap01_sh stime=1568023248
cmdline="mkswap01.sh"
contacts=""
analysis=exit
<<<test_output>>>
mkswap01 1 TINFO: timeout per run is 0h 5m 0s
tst_device.c:231: INFO: Using test device LTP_DEV='/dev/loop1'
Adding 524284k swap on /dev/loop1. Priority:-2 extents:1 across:524284k SS
mkswap01 1 TPASS: 'mkswap /dev/loop1 ' passed.
Adding 524280k swap on /dev/loop1. Priority:-2 extents:1 across:524280k SS
mkswap01 2 TPASS: 'mkswap /dev/loop1 524284' passed.
Swap area shorter than signature indicates
mkswap01 3 TINFO: Can not do swapon on /dev/loop1.
mkswap01 3 TINFO: Device size specified by 'mkswap' greater than real size.
mkswap01 3 TINFO: Swapon failed expectedly.
mkswap01 3 TPASS: 'mkswap -f /dev/loop1 524292' passed.
Adding 524284k swap on /dev/loop1. Priority:-2 extents:1 across:524284k SS
mkswap01 4 TPASS: 'mkswap -c /dev/loop1 ' passed.
mkswap01 5 TINFO: Can not do swapon on /dev/loop1.
mkswap01 5 TINFO: Page size specified by 'mkswap -p' is not equal to system's page size.
mkswap01 5 TINFO: Swapon failed expectedly.
mkswap01 5 TPASS: 'mkswap -p 2048 /dev/loop1 ' passed.
Adding 524284k swap on /dev/loop1. Priority:-2 extents:1 across:524284k SS
mkswap01 6 TPASS: 'mkswap -L ltp_testswap /dev/loop1 ' passed.
Adding 524284k swap on /dev/loop1. Priority:-2 extents:1 across:524284k SS
mkswap01 7 TPASS: 'mkswap -v1 /dev/loop1 ' passed.
mkswap01 8 TBROK: "check_for_file /dev/disk/by-uuid/3a5b2eaf-8c99-4b80-b7cf-1ef6385cf769" timed out

Summary:
passed 7
failed 0
skipped 0
warnings 0
<<<execution_status>>>
iLTP: starting which01_sh (which01.sh)
nitiation_status="ok"
duration=5 termination_type=exited termination_id=2 corefile=no
cutime=30 cstime=166
<<<test_end>>>
...
root@xilinx-zynqmp:~# cat /opt/ltp/wrLinux_ltp/results/LTP.log;cat /opt/ltp/wrLi nux_ltp/results/LTP.log | grep -q "LTP test passed";echo "Test Results: $?"
Test Start Time: Mon Sep 9 10:00:02 2019
-----------------------------------------
Testcase Result Exit Value
-------- ------ ----------
ar_sh PASS 0
ld01_sh CONF 32
ldd01_sh PASS 0
nm01_sh PASS 0
file01_sh PASS 0
tar01_sh PASS 0
logrotate_sh PASS 0
cpio01_sh PASS 0
unzip01_sh PASS 0
gzip01_sh PASS 0
cp01_sh PASS 0
ln01_sh PASS 0
mkdir01_sh PASS 0
mv01_sh PASS 0
du01_sh PASS 0
df01_ext2_sh PASS 0
df01_ext3_sh PASS 0
df01_ext4_sh PASS 0
df01_xfs_sh CONF 32
df01_vfat_sh CONF 32
df01_exfat_sh CONF 32
df01_ntfs_sh CONF 32
mkfs01_sh PASS 0
mkfs01_ext2_sh PASS 0
mkfs01_ext3_sh PASS 0
mkfs01_ext4_sh PASS 0
mkfs01_xfs_sh CONF 32
mkfs01_btrfs_sh CONF 32
mkfs01_minix_sh CONF 32
mkfs01_msdos_sh CONF 32
mkfs01_vfat_sh CONF 32
mkfs01_ntfs_sh CONF 32
mkswap01_sh FAIL 2
which01_sh PASS 0
lsmod01_sh PASS 0
insmod01_sh CONF 32
wc01_sh PASS 0
keyctl01_sh CONF 32
gdb01_sh CONF 32
unshare01_sh PASS 0
sysctl01_sh CONF 32

Steps to Reproduce

1. Build project.
/lpg-build/cdc/fast_prod/WRL10_19/WRL10_19_GIT/wrlinux-10/setup.sh --machines=xilinx-zynqmp --templates feature/test --accept-eula=yes --dl-layers

. ./oe-init-build-env build_test

bitbake-layers add-layer wrlinux/wr-testing/kts-dev echo "WRTEMPLATE_append = \" feature/ltp feature/test\"" >> conf/local.conf

bitbake wrlinux-image-glibc-std

2. Boot up the BSP target (#28570)

3. Run the following commands on the target /opt/ltp/wrLinux_ltp/wr-runltp -f commands