The Common Vulnerabilities and Exposures (CVE) project, maintained by the MITRE Corporation, is a list of all standardized names for vulnerabilities and security exposures.
| ID | Description | Priority | Modified date |
|---|---|---|---|
| CVE-2018-0371 | A vulnerability in the Web Admin Interface of Cisco Meeting Server could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to insufficient validation of incoming HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the Web Admin Interface of an affected Cisco Meeting Server. A successful exploit could allow the attacker to restart the system, terminating all ongoing calls and resulting in a DoS condition on the affected product. This vulnerability affects the following releases of Cisco Meeting Server: Acano X-Series, Cisco Meeting Server 1000, Cisco Meeting Server 2000. Cisco Bug IDs: CSCvi48624. | MEDIUM | Jun 23, 2018 |
| CVE-2018-0370 | A vulnerability in the detection engine of Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause one of the detection engine processes to run out of memory and thus slow down traffic processing. The vulnerability is due to improper handling of traffic when the Secure Sockets Layer (SSL) inspection policy is enabled. An attacker could exploit this vulnerability by sending malicious traffic through an affected device. An exploit could allow the attacker to increase the resource consumption of a single instance of the Snort detection engine on an affected device. This will lead to performance degradation and eventually the restart of the affected Snort process. Cisco Bug IDs: CSCvi09219, CSCvi29845. | MEDIUM | Jul 17, 2018 |
| CVE-2018-0369 | A vulnerability in the reassembly logic for fragmented IPv4 packets of Cisco StarOS running on virtual platforms could allow an unauthenticated, remote attacker to trigger a reload of the npusim process, resulting in a denial of service (DoS) condition. There are four instances of the npusim process running per Service Function (SF) instance, each handling a subset of all traffic flowing across the device. It is possible to trigger a reload of all four instances of the npusim process around the same time. The vulnerability is due to improper handling of fragmented IPv4 packets containing options. An attacker could exploit this vulnerability by sending a malicious IPv4 packet across an affected device. An exploit could allow the attacker to trigger a restart of the npusim process, which will result in all traffic queued toward this instance of the npusim process to be dropped while the process is restarting. The npusim process typically restarts within less than a second. This vulnerability affects: Cisco Virtualized Packet Core-Single Instance (VPC-SI), Cisco Virtualized Packet Core-Distributed Instance (VPC-DI), Cisco Ultra Packet Core (UPC). Cisco Bug IDs: CSCvh29613. | MEDIUM | Jul 17, 2018 |
| CVE-2018-0368 | A vulnerability in Cisco Digital Network Architecture (DNA) Center could allow an authenticated, local attacker to access sensitive information on an affected system. The vulnerability is due to insufficient security restrictions imposed by the affected software. An attacker could exploit this vulnerability by accessing unprotected log files. A successful exploit could allow the attacker to access sensitive log files, which may include system credentials, on the affected device. Cisco Bug IDs: CSCvi22400. | LOW | Jul 17, 2018 |
| CVE-2018-0367 | A vulnerability in the web-based management interface of the Cisco Registered Envelope Service could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of the affected service. The vulnerability is due to insufficient validation of user-supplied input that is processed by the web-based management interface of the affected service. An attacker could exploit this vulnerability by persuading a user of the interface to click a malicious link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive browser-based information. Cisco Bug IDs: CVE-2018-0367. | LOW | Aug 21, 2018 |
| CVE-2018-0366 | A vulnerability in the web-based management interface of Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf03514. | MEDIUM | Jul 17, 2018 |
| CVE-2018-0365 | A vulnerability in the web-based management interface of Cisco Firepower Management Center could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface of the affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions on the targeted device via a web browser and with the privileges of the user. Cisco Bug IDs: CSCvb19750. | MEDIUM | Jun 23, 2018 |
| CVE-2018-0364 | A vulnerability in the web-based management interface of Cisco Unified Communications Domain Manager could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform arbitrary actions on a targeted device via a web browser and with the privileges of the user. Cisco Bug IDs: CSCvi44320. | MEDIUM | Jun 23, 2018 |
| CVE-2018-0363 | A vulnerability in the web-based management interface of Cisco Unified Communications Manager IM & Presence Service (formerly CUPS) could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected device. The vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform arbitrary actions on a targeted device via a web browser and with the privileges of the user. Cisco Bug IDs: CSCvi55878. | MEDIUM | Jun 23, 2018 |
| CVE-2018-0362 | A vulnerability in BIOS authentication management of Cisco 5000 Series Enterprise Network Compute System and Cisco Unified Computing (UCS) E-Series Servers could allow an unauthenticated, local attacker to bypass the BIOS authentication and execute actions as an unprivileged user. The vulnerability is due to improper security restrictions that are imposed by the affected system. An attacker could exploit this vulnerability by submitting an empty password value to an affected device's BIOS authentication prompt. An exploit could allow the attacker to have access to a restricted set of user-level BIOS commands. Cisco Bug IDs: CSCvh83260. | MEDIUM | Jun 23, 2018 |
| CVE-2018-0361 | ClamAV before 0.100.1 lacks a PDF object length check, resulting in an unreasonably long time to parse a relatively small file. | MEDIUM | Jul 16, 2018 |
| CVE-2018-0360 | ClamAV before 0.100.1 has an HWP integer overflow with a resultant infinite loop via a crafted Hangul Word Processor file. This is in parsehwp3_paragraph() in libclamav/hwp.c. | MEDIUM | Jul 25, 2018 |
| CVE-2018-0359 | A vulnerability in the session identification management functionality of the web-based management interface for Cisco Meeting Server could allow an unauthenticated, local attacker to hijack a valid user session identifier, aka Session Fixation. The vulnerability exists because the affected application does not assign a new session identifier to a user session when a user authenticates to the application. An attacker could exploit this vulnerability by using a hijacked session identifier to connect to the application through the web-based management interface. A successful exploit could allow the attacker to hijack an authenticated user's browser session. Cisco Bug IDs: CSCvi23787. | LOW | Jun 23, 2018 |
| CVE-2018-0358 | A vulnerability in the file descriptor handling of Cisco TelePresence Video Communication Server (VCS) Expressway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to exhaustion of file descriptors while processing a high volume of traffic. An attacker could exploit this vulnerability by establishing a high number of concurrent TCP connections to the vulnerable system. An exploit could allow the attacker to cause a restart in a specific process, resulting in a temporary interruption of service. Cisco Bug IDs: CSCvh77056, CSCvh77058, CSCvh95264. | MEDIUM | Jun 23, 2018 |
| CVE-2018-0357 | A vulnerability in the web framework of Cisco WebEx could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against the user of the web interface of an affected system. The vulnerability is due to insufficient input validation of certain parameters that are passed to the affected software via the HTTP GET and HTTP POST methods. An attacker who can convince a user to follow an attacker-supplied link could execute arbitrary script or HTML code in the user's browser in the context of an affected site. Cisco Bug IDs: CSCvi71274. | MEDIUM | Jun 14, 2018 |
| CVE-2018-0356 | A vulnerability in the web framework of Cisco WebEx could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against the user of the web interface of an affected system. The vulnerability is due to insufficient input validation of certain parameters that are passed to the affected software via the HTTP GET and HTTP POST methods. An attacker who can convince a user to follow an attacker-supplied link could execute arbitrary script or HTML code in the user's browser in the context of an affected site. Cisco Bug IDs: CSCvi63757. | MEDIUM | Jun 14, 2018 |
| CVE-2018-0355 | A vulnerability in the web UI of Cisco Unified Communications Manager (Unified CM) could allow an unauthenticated, remote attacker to conduct a cross-frame scripting (XFS) attack against the user of the web UI of an affected system. The vulnerability is due to insufficient protections for HTML inline frames (iframes) by the web UI of the affected software. An attacker could exploit this vulnerability by persuading a user of the affected UI to navigate to an attacker-controlled web page that contains a malicious HTML iframe. A successful exploit could allow the attacker to conduct click-jacking or other client-side browser attacks on the affected system. Cisco Bug IDs: CSCvg19761. | MEDIUM | Jun 14, 2018 |
| CVE-2018-0354 | A vulnerability in the web framework of Cisco Unity Connection could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against the user of the web interface of an affected system. The vulnerability is due to insufficient input validation of certain parameters that are passed to the affected software via the HTTP GET and HTTP POST methods. An attacker who can convince a user to follow an attacker-supplied link could execute arbitrary script or HTML code in the user's browser in the context of an affected site. Cisco Bug IDs: CSCvf76417. | MEDIUM | Jun 14, 2018 |
| CVE-2018-0353 | A vulnerability in traffic-monitoring functions in Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to circumvent Layer 4 Traffic Monitor (L4TM) functionality and bypass security protections. The vulnerability is due to a change in the underlying operating system software that is responsible for monitoring affected traffic. An attacker could exploit this vulnerability by sending crafted IP packets to an affected device. A successful exploit could allow the attacker to pass traffic through the device, which the WSA was configured to deny. This vulnerability affects both IPv4 and IPv6 traffic. This vulnerability affects Cisco AsyncOS versions for WSA on both virtual and hardware appliances running any release of the 10.5.1, 10.5.2, or 11.0.0 WSA Software. The WSA is vulnerable if it is configured for L4TM. Cisco Bug IDs: CSCvg78875. | MEDIUM | Jun 13, 2018 |
| CVE-2018-0352 | A vulnerability in the Disk Check Tool (disk-check.sh) for Cisco Wide Area Application Services (WAAS) Software could allow an authenticated, local attacker to elevate their privilege level to root. The attacker must have valid user credentials with super user privileges (level 15) to log in to the device. The vulnerability is due to insufficient validation of script files executed in the context of the Disk Check Tool. An attacker could exploit this vulnerability by replacing one script file with a malicious script file while the affected tool is running. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. Cisco Bug IDs: CSCvi72673. | HIGH | Jun 15, 2018 |
| CVE-2018-0351 | A vulnerability in the command-line tcpdump utility in the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the tcpdump utility. The attacker must be authenticated to access the tcpdump utility. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69751. | HIGH | Jul 21, 2018 |
| CVE-2018-0350 | A vulnerability in the VPN subsystem configuration in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected parameter in a web page. The attacker must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69808, CSCvi69810, CSCvi69814, CSCvi69822, CSCvi69827, CSCvi69828, CSCvi69836. | HIGH | Jul 25, 2018 |
| CVE-2018-0349 | A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the request admin-tech command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the request admin-tech command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69852, CSCvi69856. | HIGH | Jul 20, 2018 |
| CVE-2018-0348 | A vulnerability in the CLI of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the load command within the VPN subsystem. The attacker must be authenticated to access the affected CLI parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69866. | HIGH | Jul 25, 2018 |
| CVE-2018-0347 | A vulnerability in the Zero Touch Provisioning (ZTP) subsystem of the Cisco SD-WAN Solution could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting malicious input to the affected parameter. The attacker must be authenticated to access the affected parameter. A successful exploit could allow an attacker to execute commands with root privileges. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers. Cisco Bug IDs: CSCvi69906. | HIGH | Jul 21, 2018 |
| CVE-2018-0346 | A vulnerability in the Zero Touch Provisioning service of the Cisco SD-WAN Solution could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect bounds checks for certain values in packets that are sent to the Zero Touch Provisioning service of the affected software. An attacker could exploit this vulnerability by sending malicious packets to the affected software for processing. When the software processes the packets, a buffer overflow condition could occur and cause an affected device to reload. A successful exploit could allow the attacker to cause a temporary DoS condition while the device reloads. This vulnerability can be exploited only by traffic that is destined for an affected device. It cannot be exploited by traffic that is transiting a device. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69914. | HIGH | Jul 20, 2018 |
| CVE-2018-0345 | A vulnerability in the configuration and management database of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary commands with the privileges of the vmanage user in the configuration management system of the affected software. The vulnerability is due to insufficient validation of command arguments that are passed to the configuration and management database of the affected software. An attacker could exploit this vulnerability by creating custom functions that contain malicious code and are executed as the vmanage user of the configuration management system. A successful exploit could allow the attacker to execute arbitrary commands with the privileges of the vmanage user in the configuration management system of the affected software. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69937. | HIGH | Jul 21, 2018 |
| CVE-2018-0344 | A vulnerability in the vManage dashboard for the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. The vulnerability is due to insufficient input validation of data parameters for certain fields in the affected solution. An attacker could exploit this vulnerability by configuring a malicious username on the login page of the affected solution. A successful exploit could allow the attacker to inject and execute arbitrary commands with vmanage user privileges on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69974. | MEDIUM | Jul 24, 2018 |
| CVE-2018-0343 | A vulnerability in the configuration and management service of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to execute arbitrary code with vmanage user privileges or cause a denial of service (DoS) condition on an affected system. The vulnerability is due to insufficient access restrictions to the HTTP management interface of the affected solution. An attacker could exploit this vulnerability by sending a malicious HTTP request to the affected management service through an authenticated device. A successful exploit could allow the attacker to execute arbitrary code with vmanage user privileges or stop HTTP services on an affected system. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69976. | MEDIUM | Jul 21, 2018 |
| CVE-2018-0342 | A vulnerability in the configuration and monitoring service of the Cisco SD-WAN Solution could allow an authenticated, local attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete bounds checks for data that is provided by the configuration and monitoring service of the affected solution. An attacker could exploit this vulnerability by sending malicious data to the vDaemon listening service on an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, which could allow the attacker to execute arbitrary code with root privileges on the device or cause the vDaemon listening service to reload and result in a DoS condition on the device. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi70003. | HIGH | Jul 25, 2018 |
| CVE-2018-0341 | A vulnerability in the web-based UI of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware before 11.2(1) could allow an authenticated, remote attacker to perform a command injection and execute commands with the privileges of the web server. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including arbitrary shell commands in a specific user input field. Cisco Bug IDs: CSCvi51426. | HIGH | Jul 17, 2018 |
| CVE-2018-0340 | A vulnerability in the web framework of the Cisco Unified Communications Manager (Unified CM) software could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against the user of the web interface of the affected system. The vulnerability is due to insufficient input validation of certain parameters passed to the web server. An attacker could exploit this vulnerability by convincing the user to access a malicious link or by intercepting the user request and injecting certain malicious code. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected site or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvj00512. | LOW | Jun 14, 2018 |
| CVE-2018-0339 | A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based interface. The vulnerability is due to insufficient input validation of some parameters passed to the web-based management interface. An attacker could exploit this vulnerability by convincing a user of the interface to click a specific link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf72309. | MEDIUM | Jun 14, 2018 |
| CVE-2018-0338 | A vulnerability in the role-based access-checking mechanisms of Cisco Unified Computing System (UCS) Software could allow an authenticated, local attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software lacks proper input and validation checks for certain file systems. An attacker could exploit this vulnerability by issuing crafted commands in the CLI of an affected system. A successful exploit could allow the attacker to cause other users to execute unwanted arbitrary commands on the affected system. Cisco Bug IDs: CSCvf52994. | MEDIUM | Jun 15, 2018 |
| CVE-2018-0337 | A vulnerability in the role-based access-checking mechanisms of Cisco NX-OS Software could allow an authenticated, local attacker to execute arbitrary commands on an affected device. The vulnerability exists because the affected software lacks proper input and validation checks for certain file systems. An attacker could exploit this vulnerability by issuing crafted commands in the CLI of an affected device. A successful exploit could allow the attacker to cause other users to execute unwanted, arbitrary commands on the affected device. Cisco Bug IDs: CSCvd06339, CSCvd15698, CSCvd36108, CSCvf52921, CSCvf52930, CSCvf52953, CSCvf52976. | HIGH | Jun 21, 2018 |
| CVE-2018-0336 | A vulnerability in the batch provisioning feature of Cisco Prime Collaboration Provisioning could allow an authenticated, remote attacker to escalate privileges to the Administrator level. The vulnerability is due to insufficient authorization enforcement on batch processing. An attacker could exploit this vulnerability by uploading a batch file and having the batch file processed by the system. A successful exploit could allow the attacker to escalate privileges to the Administrator level. Cisco Bug IDs: CSCvd86578. | MEDIUM | Jun 13, 2018 |
| CVE-2018-0335 | A vulnerability in the web portal authentication process of Cisco Prime Collaboration Provisioning could allow an unauthenticated, local attacker to view sensitive data. The vulnerability is due to improper logging of authentication data. An attacker could exploit this vulnerability by monitoring a specific World-Readable file for this authentication data (Cleartext Passwords). An exploit could allow the attacker to gain authentication information for other users. Cisco Bug IDs: CSCvd86602. | LOW | Jun 16, 2018 |
| CVE-2018-0334 | A vulnerability in the certificate management subsystem of Cisco AnyConnect Network Access Manager and of Cisco AnyConnect Secure Mobility Client for iOS, Mac OS X, Android, Windows, and Linux could allow an unauthenticated, remote attacker to bypass the TLS certificate check when downloading certain configuration files. The vulnerability is due to improper use of Simple Certificate Enrollment Protocol and improper server certificate validation. An attacker could exploit this vulnerability by preparing malicious profile and localization files for Cisco AnyConnect to use. A successful exploit could allow the attacker to remotely change the configuration profile, a certificate, or the localization data used by AnyConnect Secure Mobility Client. Cisco Bug IDs: CSCvh23141. | MEDIUM | Jun 13, 2018 |
| CVE-2018-0333 | A vulnerability in the VPN configuration management of Cisco FireSIGHT System Software could allow an unauthenticated, remote attacker to bypass VPN security due to unintended side effects of dynamic configuration changes that could allow an attacker to bypass configured policies. The vulnerability is due to incorrect management of the configured interface names and VPN parameters when dynamic CLI configuration changes are performed. An attacker could exploit this vulnerability by sending packets through an interface on the targeted device. A successful exploit could allow the attacker to bypass configured VPN policies. Cisco Bug IDs: CSCvh49388. | MEDIUM | Jun 9, 2018 |
| CVE-2018-0332 | A vulnerability in the Session Initiation Protocol (SIP) ingress packet processing of Cisco Unified IP Phone software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to a lack of flow-control mechanisms in the software. An attacker could exploit this vulnerability by sending high volumes of SIP INVITE traffic to the targeted device. Successful exploitation could allow the attacker to cause a disruption of services on the targeted IP phone. Cisco Bug IDs: CSCve10064, CSCve14617, CSCve14638, CSCve14683, CSCve20812, CSCve20926, CSCve20945. | MEDIUM | Jun 14, 2018 |
| CVE-2018-0331 | A vulnerability in the Cisco Discovery Protocol (formerly known as CDP) subsystem of devices running, or based on, Cisco NX-OS Software contain a vulnerability that could allow an unauthenticated, adjacent attacker to create a denial of service (DoS) condition. The vulnerability is due to a failure to properly validate certain fields within a Cisco Discovery Protocol message prior to processing it. An attacker with the ability to submit a Cisco Discovery Protocol message designed to trigger the issue could cause a DoS condition on an affected device while the device restarts. This vulnerability affects Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvc89242, CSCve40943, CSCve40953, CSCve40965, CSCve40970, CSCve40978, CSCve40992, CSCve41000, CSCve41007. | MEDIUM | Jun 23, 2018 |
| CVE-2018-0330 | A vulnerability in the NX-API management application programming interface (API) in devices running, or based on, Cisco NX-OS Software could allow an authenticated, remote attacker to execute commands with elevated privileges. The vulnerability is due to a failure to properly validate certain parameters included within an NX-API request. An attacker that can successfully authenticate to the NX-API could submit a request designed to bypass NX-OS role assignment. A successful exploit could allow the attacker to execute commands with elevated privileges. This vulnerability affects the following if configured to use the NX-API feature: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvc73177, CSCve40903, CSCve40911. | MEDIUM | Jun 23, 2018 |
| CVE-2018-0329 | A vulnerability in the default configuration of the Simple Network Management Protocol (SNMP) feature of Cisco Wide Area Application Services (WAAS) Software could allow an unauthenticated, remote attacker to read data from an affected device via SNMP. The vulnerability is due to a hard-coded, read-only community string in the configuration file for the SNMP daemon. An attacker could exploit this vulnerability by using the static community string in SNMP version 2c queries to an affected device. A successful exploit could allow the attacker to read any data that is accessible via SNMP on the affected device. Note: The static credentials are defined in an internal configuration file and are not visible in the current operation configuration ('running-config') or the startup configuration ('startup-config'). Cisco Bug IDs: CSCvi40137. | MEDIUM | Jun 13, 2018 |
| CVE-2018-0328 | A vulnerability in the web framework of Cisco Unified Communications Manager and Cisco Unified Presence could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of an affected system. The vulnerability is due to insufficient input validation of certain parameters that are passed to the affected software via the HTTP GET and HTTP POST methods. An attacker who can convince a user to follow an attacker-supplied link could execute arbitrary script or HTML code in the user's browser in the context of an affected site. Cisco Bug IDs: CSCvg89116. | MEDIUM | May 17, 2018 |
| CVE-2018-0327 | A vulnerability in the web framework of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of an affected system. The vulnerability is due to insufficient input validation of certain parameters that are passed to the affected software via the HTTP GET and HTTP POST methods. An attacker who can convince a user to follow an attacker-supplied link could execute arbitrary script or HTML code in the user's browser in the context of an affected site. Cisco Bug IDs: CSCvg86743. | MEDIUM | May 17, 2018 |
| CVE-2018-0326 | A vulnerability in the web UI of Cisco TelePresence Server Software could allow an unauthenticated, remote attacker to conduct a cross-frame scripting (XFS) attack against a user of the web UI of the affected software. The vulnerability is due to insufficient protections for HTML inline frames (iframes) by the web UI of the affected software. An attacker could exploit this vulnerability by persuading a user of the affected UI to navigate to an attacker-controlled web page that contains a malicious HTML iframe. A successful exploit could allow the attacker to conduct click-jacking or other client-side browser attacks on the affected system. Cisco Bug IDs: CSCun79565. | MEDIUM | May 19, 2018 |
| CVE-2018-0325 | A vulnerability in the Session Initiation Protocol (SIP) call-handling functionality of Cisco IP Phone 7800 Series phones and Cisco IP Phone 8800 Series phones could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected phone. The vulnerability is due to incomplete input validation of SIP Session Description Protocol (SDP) parameters by the SDP parser of an affected phone. An attacker could exploit this vulnerability by sending a malformed SIP packet to an affected phone. A successful exploit could allow the attacker to cause all active phone calls on the affected phone to be dropped while the SIP process on the phone unexpectedly restarts, resulting in a DoS condition. Cisco Bug IDs: CSCvf40066. | MEDIUM | May 19, 2018 |
| CVE-2018-0324 | A vulnerability in the CLI of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, high-privileged, local attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of command parameters in the CLI parser. An attacker could exploit this vulnerability by invoking a vulnerable CLI command with crafted malicious parameters. An exploit could allow the attacker to execute arbitrary commands with a non-root user account on the underlying Linux operating system of the affected device. Cisco Bug IDs: CSCvi09723. | MEDIUM | May 19, 2018 |
| CVE-2018-0323 | A vulnerability in the web management interface of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an authenticated, remote attacker to conduct a path traversal attack on a targeted system. The vulnerability is due to insufficient validation of web request parameters. An attacker who has access to the web management interface of the affected application could exploit this vulnerability by sending a malicious web request to the affected device. A successful exploit could allow the attacker to access sensitive information on the affected system. Cisco Bug IDs: CSCvh99631. | MEDIUM | May 19, 2018 |
| CVE-2018-0322 | A vulnerability in the web management interface of Cisco Prime Collaboration Provisioning (PCP) could allow an authenticated, remote attacker to modify sensitive data that is associated with arbitrary accounts on an affected device. The vulnerability is due to a failure to enforce access restrictions on the Help Desk and User Provisioning roles that are assigned to authenticated users. This failure could allow an authenticated attacker to modify critical attributes of higher-privileged accounts on the device. A successful exploit could allow the attacker to gain elevated privileges on the device. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 12.1 and prior. Cisco Bug IDs: CSCvd61779. | MEDIUM | Jun 14, 2018 |
