Wind River Support Network

HomeCVE Database

The Common Vulnerabilities and Exposures (CVE) project, maintained by the MITRE Corporation, is a list of all standardized names for vulnerabilities and security exposures.

Reset
Showing
of 216078 entries
IDDescriptionPriorityModified date
CVE-2024-23060 TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the ip parameter in the setDmzCfg function. -- Jan 11, 2024
CVE-2024-23059 TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the username parameter in the setDdnsCfg function. -- Jan 11, 2024
CVE-2024-23058 TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the pass parameter in the setTr069Cfg function. -- Jan 11, 2024
CVE-2024-23057 TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the tz parameter in the setNtpCfg function. -- Jan 11, 2024
CVE-2024-22942 TOTOLINK A3300R V17.0.0cu.557_B20221024 was discovered to contain a command injection vulnerability via the hostName parameter in the setWanCfg function. -- Jan 11, 2024
CVE-2024-22199 This package provides universal methods to use multiple template engines with the Fiber web framework using the Views interface. This vulnerability specifically impacts web applications that render user-supplied data through this template engine, potentially leading to the execution of malicious scripts in users\' browsers when visiting affected web pages. The vulnerability has been addressed, the template engine now defaults to having autoescape set to `true`, effectively mitigating the risk of XSS attacks. -- Jan 11, 2024
CVE-2024-22198 Nginx-UI is a web interface to manage Nginx configurations. It is vulnerable to arbitrary command execution by abusing the configuration settings. The `Home > Preference` page exposes a list of system settings such as `Run Mode`, `Jwt Secret`, `Node Secret` and `Terminal Start Command`. While the UI doesn\'t allow users to modify the `Terminal Start Command` setting, it is possible to do so by sending a request to the API. This issue may lead to authenticated remote code execution, privilege escalation, and information disclosure. This vulnerability has been patched in version 2.0.0.beta.9. -- Jan 11, 2024
CVE-2024-22197 Nginx-ui is online statistics for Server Indicators?? Monitor CPU usage, memory usage, load average, and disk usage in real-time. The `Home > Preference` page exposes a small list of nginx settings such as `Nginx Access Log Path` and `Nginx Error Log Path`. However, the API also exposes `test_config_cmd`, `reload_cmd` and `restart_cmd`. While the UI doesn\'t allow users to modify any of these settings, it is possible to do so by sending a request to the API. This issue may lead to authenticated Remote Code Execution, Privilege Escalation, and Information Disclosure. This issue has been patched in version 2.0.0.beta.9. -- Jan 11, 2024
CVE-2024-22196 Nginx-UI is an online statistics for Server Indicators?? Monitor CPU usage, memory usage, load average, and disk usage in real-time. This issue may lead to information disclosure. By using `DefaultQuery`, the `desc` and `id` values are used as default values if the query parameters are not set. Thus, the `order` and `sort_by` query parameter are user-controlled and are being appended to the `order` variable without any sanitization. This issue has been patched in version 2.0.0.beta.9. -- Jan 11, 2024
CVE-2024-22195 Jinja is an extensible templating engine. Special placeholders in the template allow writing code similar to Python syntax. It is possible to inject arbitrary HTML attributes into the rendered HTML template, potentially leading to Cross-Site Scripting (XSS). The Jinja `xmlattr` filter can be abused to inject arbitrary HTML attribute keys and values, bypassing the auto escaping mechanism and potentially leading to XSS. It may also be possible to bypass attribute validation checks if they are blacklist-based. -- Jan 11, 2024
CVE-2024-22194 cdo-local-uuid project provides a specialized UUID-generating function that can, on user request, cause a program to generate deterministic UUIDs. An information leakage vulnerability is present in `cdo-local-uuid` at version `0.4.0`, and in `case-utils` in unpatched versions (matching the pattern `0.x.0`) at and since `0.5.0`, before `0.15.0`. The vulnerability stems from a Python function, `cdo_local_uuid.local_uuid()`, and its original implementation `case_utils.local_uuid()`. -- Jan 11, 2024
CVE-2024-22190 GitPython is a python library used to interact with Git repositories. There is an incomplete fix for CVE-2023-40590. On Windows, GitPython uses an untrusted search path if it uses a shell to run `git`, as well as when it runs `bash.exe` to interpret hooks. If either of those features are used on Windows, a malicious `git.exe` or `bash.exe` may be run from an untrusted repository. This issue has been patched in version 3.1.41. -- Jan 11, 2024
CVE-2024-21982 ONTAP versions 9.4 and higher are susceptible to a vulnerability which when successfully exploited could lead to disclosure of sensitive information to unprivileged attackers when the object-store profiler command is being run by an administrative user. -- Jan 12, 2024
CVE-2024-21833 Multiple TP-LINK products allow a network-adjacent unauthenticated attacker with access to the product to execute arbitrary OS commands. Affected products/versions are as follows: Archer AX3000 firmware versions prior to Archer AX3000(JP)_V1_1.1.2 Build 20231115, Archer AX5400 firmware versions prior to Archer AX5400(JP)_V1_1.1.2 Build 20231115, Archer AXE75 firmware versions prior to Archer AXE75(JP)_V1_231115, Deco X50 firmware versions prior to Deco X50(JP)_V1_1.4.1 Build 20231122, and Deco XE200 firmware versions prior to Deco XE200(JP)_V1_1.2.5 Build 20231120. -- Jan 11, 2024
CVE-2024-21821 Multiple TP-LINK products allow a network-adjacent authenticated attacker to execute arbitrary OS commands. Affected products/versions are as follows: Archer AX3000 firmware versions prior to Archer AX3000(JP)_V1_1.1.2 Build 20231115, Archer AX5400 firmware versions prior to Archer AX5400(JP)_V1_1.1.2 Build 20231115, and Archer AXE75 firmware versions prior to Archer AXE75(JP)_V1_231115. -- Jan 11, 2024
CVE-2024-21773 Multiple TP-LINK products allow a network-adjacent unauthenticated attacker with access to the product to execute arbitrary OS commands. Affected products/versions are as follows: Archer AX3000 firmware versions prior to Archer AX3000(JP)_V1_1.1.2 Build 20231115, Archer AX5400 firmware versions prior to Archer AX5400(JP)_V1_1.1.2 Build 20231115, Deco X50 firmware versions prior to Deco X50(JP)_V1_1.4.1 Build 20231122, and Deco XE200 firmware versions prior to Deco XE200(JP)_V1_1.2.5 Build 20231120. -- Jan 11, 2024
CVE-2024-21669 Hyperledger Aries Cloud Agent Python (ACA-Py) is a foundation for building decentralized identity applications and services running in non-mobile environments. When verifying W3C Format Verifiable Credentials using JSON-LD with Linked Data Proofs (LDP-VCs), the result of verifying the presentation `document.proof` was not factored into the final `verified` value (`true`/`false`) on the presentation record. The flaw enables holders of W3C Format Verifiable Credentials using JSON-LD with Linked Data Proofs (LDPs) to present incorrectly constructed proofs, and allows malicious verifiers to save and replay a presentation from such holders as their own. This vulnerability has been present since version 0.7.0 and fixed in version 0.10.5. -- Jan 11, 2024
CVE-2024-21667 pimcore/customer-data-framework is the Customer Management Framework for management of customer data within Pimcore. An authenticated and unauthorized user can access the GDPR data extraction feature and query over the information returned, leading to customer data exposure. Permissions are not enforced when reaching the `/admin/customermanagementframework/gdpr-data/search-data-objects` endpoint allowing an authenticated user without the permissions to access the endpoint and query the data available there. An unauthorized user can access PII data from customers. This vulnerability has been patched in version 4.0.6. -- Jan 11, 2024
CVE-2024-21666 The Customer Management Framework (CMF) for Pimcore adds functionality for customer data management, segmentation, personalization and marketing automation. An authenticated and unauthorized user can access the list of potential duplicate users and see their data. Permissions are enforced when reaching the `/admin/customermanagementframework/duplicates/list` endpoint allowing an authenticated user without the permissions to access the endpoint and query the data available there. Unauthorized user(s) can access PII data from customers. This vulnerability has been patched in version 4.0.6. -- Jan 11, 2024
CVE-2024-21665 ecommerce-framework-bundle is the Pimcore Ecommerce Framework Bundle. An authenticated and unauthorized user can access the back-office orders list and be able to query over the information returned. Access control and permissions are not being enforced. This vulnerability has been patched in version 1.0.10. -- Jan 11, 2024
CVE-2024-21638 Azure IPAM (IP Address Management) is a lightweight solution developed on top of the Azure platform designed to help Azure customers manage their IP Address space easily and effectively. By design there is no write access to customers\' Azure environments as the Service Principal used is only assigned the Reader role at the root Management Group level. Until recently, the solution lacked the validation of the passed in authentication token which may result in attacker impersonating any privileged user to access data stored within the IPAM instance and subsequently from Azure, causing an elevation of privilege. This vulnerability has been patched in version 3.0.0. -- Jan 11, 2024
CVE-2024-21637 Authentik is an open-source Identity Provider. Authentik is a vulnerable to a reflected Cross-Site Scripting vulnerability via JavaScript-URIs in OpenID Connect flows with `response_mode=form_post`. This relatively user could use the described attacks to perform a privilege escalation. This vulnerability has been patched in versions 2023.10.6 and 2023.8.6. -- Jan 11, 2024
CVE-2024-21617 An Incomplete Cleanup vulnerability in Nonstop active routing (NSR) component of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker to cause memory leak leading to Denial of Service (DoS). On all Junos OS platforms, when NSR is enabled, a BGP flap will cause memory leak. A manual reboot of the system will restore the services. Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. The memory usage can be monitored using the below commands. user@host> show chassis routing-engine no-forwarding user@host> show system memory | no-more This issue affects: Juniper Networks Junos OS * 21.2 versions earlier than 21.2R3-S5; * 21.3 versions earlier than 21.3R3-S4; * 21.4 versions earlier than 21.4R3-S4; * 22.1 versions earlier than 22.1R3-S2; * 22.2 versions earlier than 22.2R3-S2; * 22.3 versions earlier than 22.3R2-S1, 22.3R3; * 22.4 versions earlier than 22.4R1-S2, 22.4R2. This issue does not affect Junos OS versions earlier than 20.4R3-S7. -- Jan 12, 2024
CVE-2024-21616 An Improper Validation of Syntactic Correctness of Input vulnerability in Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS). On all Junos OS MX Series and SRX Series platforms, when SIP ALG is enabled, and a specific SIP packet is received and processed, NAT IP allocation fails for genuine traffic, which causes Denial of Service (DoS). Continuous receipt of this specific SIP ALG packet will cause a sustained DoS condition. NAT IP usage can be monitored by running the following command. user@srx> show security nat resource-usage source-pool <source_pool_name> Pool name: source_pool_name .. Address Factor-index Port-range Used Avail Total Usage X.X.X.X 0 Single Ports 50258 52342 62464 96% <<<<< - Alg Ports 0 2048 2048 0% This issue affects: Juniper Networks Junos OS on MX Series and SRX Series * All versions earlier than 21.2R3-S6; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S1; * 22.4 versions earlier than 22.4R2-S2, 22.4R3; * 23.2 versions earlier than 23.2R1-S1, 23.2R2. -- Jan 12, 2024
CVE-2024-21614 An Improper Check for Unusual or Exceptional Conditions vulnerability in Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a network-based, unauthenticated attacker to cause rpd to crash, leading to Denial of Service (DoS). On all Junos OS and Junos OS Evolved platforms, when NETCONF and gRPC are enabled, and a specific query is executed via Dynamic Rendering (DREND), rpd will crash and restart. Continuous execution of this specific query will cause a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS * 22.2 versions earlier than 22.2R2-S2, 22.2R3; * 22.3 versions earlier than 22.3R2, 22.3R3. Juniper Networks Junos OS Evolved * 22.2 versions earlier than 22.2R2-S2-EVO, 22.2R3-EVO; * 22.3 versions earlier than 22.3R2-EVO, 22.3R3-EVO. This issue does not affect Juniper Networks: Junos OS versions earlier than 22.2R1; Junos OS Evolved versions earlier than 22.2R1-EVO. -- Jan 12, 2024
CVE-2024-21613 A Missing Release of Memory after Effective Lifetime vulnerability in Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, adjacent attacker to cause an rpd crash, leading to Denial of Service (DoS). On all Junos OS and Junos OS Evolved platforms, when traffic engineering is enabled for OSPF or ISIS, and a link flaps, a patroot memory leak is observed. This memory leak, over time, will lead to an rpd crash and restart. The memory usage can be monitored using the below command. user@host> show task memory detail | match patroot This issue affects: Juniper Networks Junos OS * All versions earlier than 21.2R3-S3; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S3; * 22.1 versions earlier than 22.1R3; * 22.2 versions earlier than 22.2R3. Juniper Networks Junos OS Evolved * All versions earlier than 21.3R3-S5-EVO; * 21.4 versions earlier than 21.4R3-EVO; * 22.1 versions earlier than 22.1R3-EVO; * 22.2 versions earlier than 22.2R3-EVO. -- Jan 12, 2024
CVE-2024-21612 An Improper Handling of Syntactically Invalid Structure vulnerability in Object Flooding Protocol (OFP) service of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). On all Junos OS Evolved platforms, when specific TCP packets are received on an open OFP port, the OFP crashes leading to a restart of Routine Engine (RE). Continuous receipt of these specific TCP packets will lead to a sustained Denial of Service (DoS) condition. This issue affects: Juniper Networks Junos OS Evolved * All versions earlier than 21.2R3-S7-EVO; * 21.3 versions earlier than 21.3R3-S5-EVO ; * 21.4 versions earlier than 21.4R3-S5-EVO; * 22.1 versions earlier than 22.1R3-S4-EVO; * 22.2 versions earlier than 22.2R3-S3-EVO ; * 22.3 versions earlier than 22.3R3-EVO; * 22.4 versions earlier than 22.4R2-EVO, 22.4R3-EVO. -- Jan 12, 2024
CVE-2024-21611 A Missing Release of Memory after Effective Lifetime vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). In a Juniper Flow Monitoring (jflow) scenario route churn that causes BGP next hops to be updated will cause a slow memory leak and eventually a crash and restart of rpd. Thread level memory utilization for the areas where the leak occurs can be checked using the below command: user@host> show task memory detail | match so_in so_in6 28 32 344450 11022400 344760 11032320 so_in 8 16 1841629 29466064 1841734 29467744 This issue affects: Junos OS * 21.4 versions earlier than 21.4R3; * 22.1 versions earlier than 22.1R3; * 22.2 versions earlier than 22.2R3. Junos OS Evolved * 21.4-EVO versions earlier than 21.4R3-EVO; * 22.1-EVO versions earlier than 22.1R3-EVO; * 22.2-EVO versions earlier than 22.2R3-EVO. This issue does not affect: Juniper Networks Junos OS versions earlier than 21.4R1. Juniper Networks Junos OS Evolved versions earlier than 21.4R1. -- Jan 12, 2024
CVE-2024-21607 An Unsupported Feature in the UI vulnerability in Juniper Networks Junos OS on MX Series and EX9200 Series allows an unauthenticated, network-based attacker to cause partial impact to the integrity of the device. If the tcp-reset option is added to the reject action in an IPv6 filter which matches on payload-protocol, packets are permitted instead of rejected. This happens because the payload-protocol match criteria is not supported in the kernel filter causing it to accept all packets without taking any other action. As a fix the payload-protocol match will be treated the same as a next-header match to avoid this filter bypass. This issue doesn\'t affect IPv4 firewall filters. This issue affects Juniper Networks Junos OS on MX Series and EX9200 Series: * All versions earlier than 20.4R3-S7; * 21.1 versions earlier than 21.1R3-S5; * 21.2 versions earlier than 21.2R3-S5; * 21.3 versions earlier than 21.3R3-S4; * 21.4 versions earlier than 21.4R3-S4; * 22.1 versions earlier than 22.1R3-S2; * 22.2 versions earlier than 22.2R3-S2; * 22.3 versions earlier than 22.3R2-S2, 22.3R3; * 22.4 versions earlier than 22.4R1-S2, 22.4R2-S2, 22.4R3. -- Jan 12, 2024
CVE-2024-21606 A Double Free vulnerability in the flow processing daemon (flowd) of Juniper Networks Junos OS on SRX Series allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). In a remote access VPN scenario, if a tcp-encap-profile is configured and a sequence of specific packets is received, a flowd crash and restart will be observed. This issue affects Juniper Networks Junos OS on SRX Series: * All versions earlier than 20.4R3-S8; * 21.2 versions earlier than 21.2R3-S6; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S3; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S1; * 22.4 versions earlier than 22.4R2-S2, 22.4R3. -- Jan 12, 2024
CVE-2024-21604 An Allocation of Resources Without Limits or Throttling vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). If a high rate of specific valid packets are processed by the routing engine (RE) this will lead to a loss of connectivity of the RE with other components of the chassis and thereby a complete and persistent system outage. Please note that a carefully designed lo0 firewall filter will block or limit these packets which should prevent this issue from occurring. The following log messages can be seen when this issue occurs: <host> kernel: nf_conntrack: nf_conntrack: table full, dropping packet This issue affects Juniper Networks Junos OS Evolved: * All versions earlier than 20.4R3-S7-EVO; * 21.2R1-EVO and later versions; * 21.4-EVO versions earlier than 21.4R3-S5-EVO; * 22.1-EVO versions earlier than 22.1R3-S2-EVO; * 22.2-EVO versions earlier than 22.2R3-EVO; * 22.3-EVO versions earlier than 22.3R2-EVO; * 22.4-EVO versions earlier than 22.4R2-EVO. -- Jan 12, 2024
CVE-2024-21603 An Improper Check for Unusual or Exceptional Conditions vulnerability in the kernel of Juniper Network Junos OS on MX Series allows a network based attacker with low privileges to cause a denial of service. If a scaled configuration for Source class usage (SCU) / destination class usage (DCU) (more than 10 route classes) is present and the SCU/DCU statistics are gathered by executing specific SNMP requests or CLI commands, a \'vmcore\' for the RE kernel will be seen which leads to a device restart. Continued exploitation of this issue will lead to a sustained DoS. This issue only affects MX Series devices with MPC10, MPC11 or LC9600, and MX304. No other MX Series devices are affected. This issue affects Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S6; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3; * 22.1 versions earlier than 22.1R3; * 22.2 versions earlier than 22.2R2; * 22.3 versions earlier than 22.3R2. -- Jan 12, 2024
CVE-2024-21602 A NULL Pointer Dereference vulnerability in Juniper Networks Junos OS Evolved on ACX7024, ACX7100-32C and ACX7100-48L allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). If a specific IPv4 UDP packet is received and sent to the Routing Engine (RE) packetio crashes and restarts which causes a momentary traffic interruption. Continued receipt of such packets will lead to a sustained DoS. This issue does not happen with IPv6 packets. This issue affects Juniper Networks Junos OS Evolved on ACX7024, ACX7100-32C and ACX7100-48L: * 21.4-EVO versions earlier than 21.4R3-S6-EVO; * 22.1-EVO versions earlier than 22.1R3-S5-EVO; * 22.2-EVO versions earlier than 22.2R2-S1-EVO, 22.2R3-EVO; * 22.3-EVO versions earlier than 22.3R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions earlier than 21.4R1-EVO. -- Jan 12, 2024
CVE-2024-21601 A Concurrent Execution using Shared Resource with Improper Synchronization (\'Race Condition\') vulnerability in the Flow-processing Daemon (flowd) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (Dos). On SRX Series devices when two different threads try to simultaneously process a queue which is used for TCP events flowd will crash. One of these threads can not be triggered externally, so the exploitation of this race condition is outside the attackers direct control. Continued exploitation of this issue will lead to a sustained DoS. This issue affects Juniper Networks Junos OS: * 21.2 versions earlier than 21.2R3-S5; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S4; * 22.1 versions earlier than 22.1R3-S3; * 22.2 versions earlier than 22.2R3-S1; * 22.3 versions earlier than 22.3R2-S2, 22.3R3; * 22.4 versions earlier than 22.4R2-S1, 22.4R3. This issue does not affect Juniper Networks Junos OS versions earlier than 21.2R1. -- Jan 12, 2024
CVE-2024-21600 An Improper Neutralization of Equivalent Special Elements vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on PTX Series allows a unauthenticated, adjacent attacker to cause a Denial of Service (DoS). When MPLS packets are meant to be sent to a flexible tunnel interface (FTI) and if the FTI tunnel is down, these will hit the reject NH, due to which the packets get sent to the CPU and cause a host path wedge condition. This will cause the FPC to hang and requires a manual restart to recover. Please note that this issue specifically affects PTX1000, PTX3000, PTX5000 with FPC3, PTX10002-60C, and PTX10008/16 with LC110x. Other PTX Series devices and Line Cards (LC) are not affected. The following log message can be seen when the issue occurs: Cmerror Op Set: Host Loopback: HOST LOOPBACK WEDGE DETECTED IN PATH ID <id> (URI: /fpc/<fpc>/pfe/<pfe>/cm/<cm>/Host_Loopback/<cm>/HOST_LOOPBACK_MAKE_CMERROR_ID[<id>]) This issue affects Juniper Networks Junos OS: * All versions earlier than 20.4R3-S8; * 21.1 versions earlier than 21.1R3-S4; * 21.2 versions earlier than 21.2R3-S6; * 21.3 versions earlier than 21.3R3-S3; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R2-S2, 22.1R3; * 22.2 versions earlier than 22.2R2-S1, 22.2R3. -- Jan 12, 2024
CVE-2024-21599 A Missing Release of Memory after Effective Lifetime vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series allows an adjacent, unauthenticated attacker to cause a Denial of Service (DoS). If an MX Series device receives PTP packets on an MPC3E that doesn\'t support PTP this causes a memory leak which will result in unpredictable behavior and ultimately in an MPC crash and restart. To monitor for this issue, please use the following FPC vty level commands: show heap shows an increase in LAN buffer utilization and show clksync ptp nbr-upd-info shows non-zero Pending PFEs counter. This issue affects Juniper Networks Junos OS on MX Series with MPC3E: * All versions earlier than 20.4R3-S3; * 21.1 versions earlier than 21.1R3-S4; * 21.2 versions earlier than 21.2R3; * 21.3 versions earlier than 21.3R2-S1, 21.3R3; * 21.4 versions earlier than 21.4R2; * 22.1 versions earlier than 22.1R2. -- Jan 12, 2024
CVE-2024-21597 An Exposure of Resource to Wrong Sphere vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass the intended access restrictions. In an Abstracted Fabric (AF) scenario if routing-instances (RI) are configured, specific valid traffic destined to the device can bypass the configured lo0 firewall filters as it\'s received in the wrong RI context. This issue affects Juniper Networks Junos OS on MX Series: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S3; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3; * 22.2 versions earlier than 22.2R3; * 22.3 versions earlier than 22.3R2. -- Jan 12, 2024
CVE-2024-21596 A Heap-based Buffer Overflow vulnerability in the Routing Protocol Daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network based attacker to cause a Denial of Service (DoS). If an attacker sends a specific BGP UPDATE message to the device, this will cause a memory overwrite and therefore an RPD crash and restart in the backup Routing Engine (RE). Continued receipt of these packets will cause a sustained Denial of Service (DoS) condition in the backup RE. The primary RE is not impacted by this issue and there is no impact on traffic. This issue only affects devices with NSR enabled. Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. This issue requires an attacker to have an established BGP session to a system affected by the issue. This issue affects both eBGP and iBGP implementations. This issue affects: Juniper Networks Junos OS * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S2; * 22.3 versions earlier than 22.3R3-S1; * 22.4 versions earlier than 22.4R2-S2, 22.4R3; * 23.1 versions earlier than 23.1R2; * 23.2 versions earlier than 23.2R1-S2, 23.2R2. Juniper Networks Junos OS Evolved * All versions earlier than 21.3R3-S5-EVO; * 21.4-EVO versions earlier than 21.4R3-S5-EVO; * 22.1-EVO versions earlier than 22.1R3-S4-EVO; * 22.2-EVO versions earlier than 22.2R3-S2-EVO; * 22.3-EVO versions later than 22.3R1-EVO; * 22.4-EVO versions earlier than 22.4R2-S2-EVO, 22.4R3-EVO; * 23.1-EVO versions earlier than 23.1R2-EVO; * 23.2-EVO versions earlier than 23.2R1-S2-EVO, 23.2R2-EVO. -- Jan 12, 2024
CVE-2024-21595 An Improper Validation of Syntactic Correctness of Input vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). If an attacker sends high rate of specific ICMP traffic to a device with VXLAN configured, this causes a deadlock of the PFE and results in the device becoming unresponsive. A manual restart will be required to recover the device. This issue only affects EX4100, EX4400, EX4600, QFX5000 Series devices. This issue affects: Juniper Networks Junos OS * 21.4R3 versions earlier than 21.4R3-S4; * 22.1R3 versions earlier than 22.1R3-S3; * 22.2R2 versions earlier than 22.2R3-S1; * 22.3 versions earlier than 22.3R2-S2, 22.3R3; * 22.4 versions earlier than 22.4R2; * 23.1 versions earlier than 23.1R2. -- Jan 12, 2024
CVE-2024-21594 A Heap-based Buffer Overflow vulnerability in the Network Services Daemon (NSD) of Juniper Networks Junos OS allows authenticated, low privileged, local attacker to cause a Denial of Service (DoS). On an SRX 5000 Series device, when executing a specific command repeatedly, memory is corrupted, which leads to a Flow Processing Daemon (flowd) crash. The NSD process has to be restarted to restore services. If this issue occurs, it can be checked with the following command: user@host> request security policies check The following log message can also be observed: Error: policies are out of sync for PFE node<number>.fpc<number>.pic<number>. This issue affects: Juniper Networks Junos OS on SRX 5000 Series * All versions earlier than 20.4R3-S6; * 21.1 versions earlier than 21.1R3-S5; * 21.2 versions earlier than 21.2R3-S4; * 21.3 versions earlier than 21.3R3-S3; * 21.4 versions earlier than 21.4R3-S3; * 22.1 versions earlier than 22.1R3-S1; * 22.2 versions earlier than 22.2R3; * 22.3 versions earlier than 22.3R2. -- Jan 12, 2024
CVE-2024-21591 An Out-of-bounds Write vulnerability in J-Web of Juniper Networks Junos OS on SRX Series and EX Series allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS), or Remote Code Execution (RCE) and obtain root privileges on the device. This issue is caused by use of an insecure function allowing an attacker to overwrite arbitrary memory. This issue affects Juniper Networks Junos OS SRX Series and EX Series: * Junos OS versions earlier than 20.4R3-S9; * Junos OS 21.2 versions earlier than 21.2R3-S7; * Junos OS 21.3 versions earlier than 21.3R3-S5; * Junos OS 21.4 versions earlier than 21.4R3-S5; * Junos OS 22.1 versions earlier than 22.1R3-S4; * Junos OS 22.2 versions earlier than 22.2R3-S3; * Junos OS 22.3 versions earlier than 22.3R3-S2; * Junos OS 22.4 versions earlier than 22.4R2-S2, 22.4R3. -- Jan 12, 2024
CVE-2024-21589 An Improper Access Control vulnerability in the Juniper Networks Paragon Active Assurance Control Center allows an unauthenticated network-based attacker to access reports without authenticating, potentially containing sensitive configuration information. A feature was introduced in version 3.1.0 of the Paragon Active Assurance Control Center which allows users to selectively share account data. By exploiting this vulnerability, it is possible to access reports without being logged in, resulting in the opportunity for malicious exfiltration of user data. Note that the Paragon Active Assurance Control Center SaaS offering is not affected by this issue. This issue affects Juniper Networks Paragon Active Assurance versions 3.1.0, 3.2.0, 3.2.2, 3.3.0, 3.3.1, 3.4.0. This issue does not affect Juniper Networks Paragon Active Assurance versions earlier than 3.1.0. -- Jan 12, 2024
CVE-2024-21587 An Improper Handling of Exceptional Conditions vulnerability in the broadband edge subscriber management daemon (bbe-smgd) of Juniper Networks Junos OS on MX Series allows an attacker directly connected to the vulnerable system who repeatedly flaps DHCP subscriber sessions to cause a slow memory leak, ultimately leading to a Denial of Service (DoS). Memory can only be recovered by manually restarting bbe-smgd. This issue only occurs if BFD liveness detection for DHCP subscribers is enabled. Systems without BFD liveness detection enabled are not vulnerable to this issue. Indication of the issue can be observed by periodically executing the \'show system processes extensive\' command, which will indicate an increase in memory allocation for bbe-smgd. A small amount of memory is leaked every time a DHCP subscriber logs in, which will become visible over time, ultimately leading to memory starvation. user@junos> show system processes extensive | match bbe-smgd 13071 root 24 0 415M 201M select 0 0:41 7.28% bbe-smgd{bbe-smgd} 13071 root 20 0 415M 201M select 1 0:04 0.00% bbe-smgd{bbe-smgd} ... user@junos> show system processes extensive | match bbe-smgd 13071 root 20 0 420M 208M select 0 4:33 0.10% bbe-smgd{bbe-smgd} 13071 root 20 0 420M 208M select 0 0:12 0.00% bbe-smgd{bbe-smgd} ... This issue affects Juniper Networks Junos OS on MX Series: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R2-S2, 22.4R3; * 23.2 versions earlier than 23.2R1-S1, 23.2R2. -- Jan 12, 2024
CVE-2024-21585 An Improper Handling of Exceptional Conditions vulnerability in BGP session processing of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker, using specific timing outside the attacker\'s control, to flap BGP sessions and cause the routing protocol daemon (rpd) process to crash and restart, leading to a Denial of Service (DoS) condition. Continued BGP session flapping will create a sustained Denial of Service (DoS) condition. This issue only affects routers configured with non-stop routing (NSR) enabled. Graceful Restart (GR) helper mode, enabled by default, is also required for this issue to be exploitable. Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. When the BGP session flaps on the NSR-enabled router, the device enters GR-helper/LLGR-helper mode due to the peer having negotiated GR/LLGR-restarter capability and the backup BGP requests for replication of the GR/LLGR-helper session, master BGP schedules, and initiates replication of GR/LLGR stale routes to the backup BGP. In this state, if the BGP session with the BGP peer comes up again, unsolicited replication is initiated for the peer without cleaning up the ongoing GR/LLGR-helper mode replication. This parallel two instances of replication for the same peer leads to the assert if the BGP session flaps again. This issue affects: Juniper Networks Junos OS * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S5; * 22.1 versions earlier than 22.1R3-S4; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S1; * 22.4 versions earlier than 22.4R2-S2, 22.4R3; * 23.2 versions earlier than 23.2R1-S1, 23.2R2. Juniper Networks Junos OS Evolved * All versions earlier than 21.3R3-S5-EVO; * 21.4 versions earlier than 21.4R3-S5-EVO; * 22.1 versions earlier than 22.1R3-S4-EVO; * 22.2 versions earlier than 22.2R3-S3-EVO; * 22.3 versions earlier than 22.3R3-S1-EVO; * 22.4 versions earlier than 22.4R2-S2-EVO, 22.4R3-EVO; * 23.2 versions earlier than 23.2R1-S1-EVO, 23.2R2-EVO. -- Jan 12, 2024
CVE-2024-21337 Microsoft Edge (Chromium-based) Elevation of Privilege Vulnerability -- Jan 11, 2024
CVE-2024-20715 Adobe Substance 3D Stager versions 2.1.3 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file. -- Jan 10, 2024
CVE-2024-20714 Adobe Substance 3D Stager versions 2.1.3 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file. -- Jan 10, 2024
CVE-2024-20713 Adobe Substance 3D Stager versions 2.1.3 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file. -- Jan 10, 2024
CVE-2024-20712 Adobe Substance 3D Stager versions 2.1.3 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file. -- Jan 10, 2024
CVE-2024-20711 Adobe Substance 3D Stager versions 2.1.3 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to bypass mitigations such as ASLR. Exploitation of this issue requires user interaction in that a victim must open a malicious file. -- Jan 10, 2024
The 'Fixed Release' column is displayed if a single product version is selected from the filter. The fixed release is applicable in cases when the CVE has been addressed and fixed for that product version. Requires LTSS - customers must have active LTSS (Long Term Security Shield) Support to receive up-to-date information about vulnerabilities that may affect legacy software. Please contact your Wind River account team or see https://docs.windriver.com/bundle/Support_and_Maintenance_Supplemental_Terms_and_Conditions and https://support2.windriver.com/index.php?page=plc for more information.
Live chat
Online