The Common Vulnerabilities and Exposures (CVE) project, maintained by the MITRE Corporation, is a list of all standardized names for vulnerabilities and security exposures.
| ID | Description | Priority | Modified date |
|---|---|---|---|
| CVE-2023-38302 | A certain software build for the Sharp Rouvo V device (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys) leaks the Wi-Fi MAC address and the Bluetooth MAC address to system properties that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in this instance they are leaked by a high-privilege process and can be obtained indirectly. This malicious app reads from the ro.boot.wifi_mac system property to indirectly obtain the Wi-Fi MAC address and reads the ro.boot.bt_mac system property to obtain the Bluetooth MAC address. | -- | Apr 22, 2024 |
| CVE-2023-38301 | An issue was discovered in a third-party component related to vendor.gsm.serial, shipped on devices from multiple device manufacturers. Various software builds for the BLU View 2, Boost Mobile Celero 5G, Sharp Rouvo V, Motorola Moto G Pure, Motorola Moto G Power, T-Mobile Revvl 6 Pro 5G, and T-Mobile Revvl V+ 5G devices leak the device serial number to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: BLU View 2 (BLU/B131DL/B130DL:11/RP1A.200720.011/1672046950:user/release-keys); Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys); Sharp Rouvo V (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys); Motorola Moto G Pure (motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-2/74844:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-7/5cde8:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-10/d67faa:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-13/b4a29:user/release-keys, motorola/ellis_trac/ellis:12/S3RH32.20-42-10/1c2540:user/release-keys, motorola/ellis_trac/ellis:12/S3RHS32.20-42-13-2-1/6368dd:user/release-keys, motorola/ellis_a/ellis:11/RRH31.Q3-46-50-2/20fec:user/release-keys, motorola/ellis_vzw/ellis:11/RRH31.Q3-46-138/103bd:user/release-keys, motorola/ellis_vzw/ellis:11/RRHS31.Q3-46-138-2/e5502:user/release-keys, and motorola/ellis_vzw/ellis:12/S3RHS32.20-42-10-14-2/5e0b0:user/release-keys); Motorola Moto G Power (motorola/tonga_g/tonga:11/RRQ31.Q3-68-16-2/e5877:user/release-keys and motorola/tonga_g/tonga:12/S3RQS32.20-42-10-6/f876d3:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys); and T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys). This malicious app reads from the vendor.gsm.serial system property to indirectly obtain the device serial number. | -- | Apr 22, 2024 |
| CVE-2023-38300 | A certain software build for the Orbic Maui device (Orbic/RC545L/RC545L:10/ORB545L_V1.4.2_BVZPP/230106:user/release-keys) leaks the IMEI and the ICCID to system properties that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in this instance they are leaked by a high-privilege process and can be obtained indirectly. This malicious app reads from the persist.sys.verizon_test_plan_imei system property to indirectly obtain the IMEI and reads the persist.sys.verizon_test_plan_iccid system property to obtain the ICCID. | -- | Apr 22, 2024 |
| CVE-2023-38299 | Various software builds for the AT&T Calypso, Nokia C100, Nokia C200, and BLU View 3 devices leak the device IMEI to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: AT&T Calypso (ATT/U318AA/U318AA:10/QP1A.190711.020/1632369780:user/release-keys); Nokia C100 (Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_190:user/release-keys and Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_270:user/release-keys); Nokia C200 (Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_080:user/release-keys); and BLU View 3 (BLU/B140DL/B140DL:11/RP1A.200720.011/1628014629:user/release-keys, BLU/B140DL/B140DL:11/RP1A.200720.011/1632535579:user/release-keys, BLU/B140DL/B140DL:11/RP1A.200720.011/1637325978:user/release-keys, BLU/B140DL/B140DL:11/RP1A.200720.011/1650073052:user/release-keys, BLU/B140DL/B140DL:11/RP1A.200720.011/1657087912:user/release-keys, BLU/B140DL/B140DL:11/RP1A.200720.011/1666316280:user/release-keys, and BLU/B140DL/B140DL:11/RP1A.200720.011/1672371162:user/release-keys). This malicious app reads from the persist.sys.imei1 system property to indirectly obtain the device IMEI. | -- | Apr 22, 2024 |
| CVE-2023-38298 | Various software builds for the following TCL devices (30Z, A3X, 20XE, 10L) leak the device IMEI to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys); TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys); TCL 20XE (TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB7I-0:user/release-keys and TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB83-0:user/release-keys); and TCL 10L (TCL/T770B/T1_LITE:10/QKQ1.200329.002/3CJ0:user/release-keys and TCL/T770B/T1_LITE:11/RKQ1.210107.001/8BIC:user/release-keys). This malicious app reads from the gsm.device.imei0 system property to indirectly obtain the device IMEI. | -- | Apr 22, 2024 |
| CVE-2023-38297 | An issue was discovered in a third-party com.factory.mmigroup component, shipped on devices from multiple device manufacturers. Certain software builds for various Android devices contain a vulnerable pre-installed app with a package name of com.factory.mmigroup (versionCode=\'3\', versionName=\'2.1) that allows local third-party apps to perform various actions, due to inadequate access control, in its context (system user), but the functionalities exposed depend on the specific device. The following capabilities are exposed to zero-permission, third-party apps on the following devices: arbitrary AT command execution via AT command injection (T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, and Boost Mobile Celero 5G); programmatic factory reset (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD), leaking IMEI (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); leaking serial number (Samsung Galaxy A03s, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, Realme C25Y, and Lenovo Tab M8 HD); powering off the device (Realme C25Y, Samsung Galaxy A03S, and T-Mobile Revvl 6 Pro 5G); and programmatically enabling/disabling airplane mode (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y); and enabling Wi-Fi, Bluetooth, and GPS (Samsung Galaxy A03S, T-Mobile Revvl 6 Pro 5G, T-Mobile Revvl V+ 5G, Boost Mobile Celero, and Realme C25Y). No permissions or special privileges are necessary to exploit the vulnerabilities in the com.factory.mmigroup app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Boost Mobile Celero 5G (Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V067:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V064:user/release-keys, Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V061:user/release-keys, and Celero5G/Jupiter/Jupiter:11/RP1A.200720.011/SW_S98119AA1_V052:user/release-keys); Samsung Galaxy A03S (samsung/a03sutfn/a03su:13/TP1A.220624.014/S134DLUDU6CWB6:user/release-keys and samsung/a03sutfn/a03su:12/SP1A.210812.016/S134DLUDS5BWA1:user/release-keys); Lenovo Tab M8 HD (Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300637_220706_BMP:user/release-keys and Lenovo/LenovoTB-8505F/8505F:10/QP1A.190711.020/S300448_220114_BMP:user/release-keys); T-Mobile Revvl 6 Pro 5G (T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V070:user/release-keys and T-Mobile/Augusta/Augusta:12/SP1A.210812.016/SW_S98121AA1_V066:user/release-keys); T-Mobile Revvl V+ 5G (T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V077:user/release-keys and T-Mobile/Sprout/Sprout:11/RP1A.200720.011/SW_S98115AA1_V060:user/release-keys); and Realme C25Y (realme/RMX3269/RED8F6:11/RP1A.201005.001/1675861640000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1664031768000:user/release-keys, realme/RMX3269/RED8F6:11/RP1A.201005.001/1652814687000:user/release-keys, and realme/RMX3269/RED8F6:11/RP1A.201005.001/1635785712000:user/release-keys). This malicious app sends a broadcast Intent to com.factory.mmigroup/.MMIGroupReceiver. This causes the com.factory.mmigroup app to dynamically register for various action strings. The malicious app can then send these strings, allowing it to perform various behaviors that the com.factory.mmigroup app exposes. The actual behaviors exposed by the com.factory.mmigroup app depend on device model and chipset. The com.factory.mmigroup app executes as the system user, allowing it to interact with the baseband processor and perform various other sensitive actions. | -- | Apr 22, 2024 |
| CVE-2023-38296 | Various software builds for the following TCL 30Z and TCL A3X devices leak the ICCID to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys) and TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys). This malicious app reads from the persist.sys.tctPowerIccid system property to indirectly obtain the ICCID. | -- | Apr 22, 2024 |
| CVE-2023-38295 | Certain software builds for the TCL 30Z and TCL 10 Android devices contain a vulnerable, pre-installed app that relies on a missing permission that provides no protection at runtime. The missing permission is required as an access permission by components in various pre-installed apps. On the TCL 30Z device, the vulnerable app has a package name of com.tcl.screenrecorder (versionCode=\'1221092802\', versionName=\'v5.2120.02.12008.1.T\' ; versionCode=\'1221092805\', versionName=\'v5.2120.02.12008.2.T\'). On the TCL 10L device, the vulnerable app has a package name of com.tcl.sos (versionCode=\'2020102827\', versionName=\'v3.2014.12.1012.B\'). When a third-party app declares and requests the missing permission, it can interact with certain service components in the aforementioned apps (that execute with system privileges) to perform arbitrary files reads/writes in its context. An app exploiting this vulnerability only needs to declare and request the single missing permission and no user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: TCL 10L (TCL/T770B/T1_LITE:11/RKQ1.210107.001/8BIC:user/release-keys) and TCL 30Z (TCL/4188R/Jetta_ATT:12/SP1A.210812.016/LV8E:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU5P:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU61:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU66:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU68:user/release-keys, TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6P:user/release-keys, and TCL/T602DL/Jetta_TF:12/SP1A.210812.016/vU6X:user/release-keys). This malicious app declares the missing permission named com.tct.smart.switchphone.permission.SWITCH_DATA as a normal permission, requests the missing permission, and uses it to interact with the com.tct.smart.switchdata.DataService service component that is declared in vulnerable apps that execute with system privileges to perform arbitrary file reads/writes. | -- | Apr 22, 2024 |
| CVE-2023-38294 | Certain software builds for the Itel Vision 3 Turbo Android device contain a vulnerable pre-installed app with a package name of com.transsion.autotest.factory (versionCode=\'7\', versionName=\'1.8.0(220310_1027)\') that allows local third-party apps to execute arbitrary shell commands in its context (system user) due to inadequate access control. No permissions or special privileges are necessary to exploit the vulnerability in the com.transsion.autotest.factory app. No user interaction is required beyond installing and running a third-party app. The vulnerability allows local apps to access sensitive functionality that is generally restricted to pre-installed apps, such as programmatically performing the following actions: granting arbitrary permissions (which can be used to obtain sensitive user data), installing arbitrary apps, video recording the screen, wiping the device (removing the user\'s apps and data), injecting arbitrary input events, calling emergency phone numbers, disabling apps, accessing notifications, and much more. The confirmed vulnerable software build fingerprints for the Itel Vision 3 Turbo device are as follows: Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V92-20230105:user/release-keys, Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V86-20221118:user/release-keys, Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V78-20221101:user/release-keys, Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V64-20220803:user/release-keys, Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V61-20220721:user/release-keys, Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V58-20220712:user/release-keys, and Itel/F6321/itel-S661LP:11/RP1A.201005.001/GL-V051-20220613:user/release-keys. This malicious app sends a broadcast Intent to the receiver component named com.transsion.autotest.factory/.broadcast.CommandReceiver with the path to a shell script that it creates in its scoped storage directory. Then the com.transsion.autotest.factory app will execute the shell script with system privileges. | -- | Apr 22, 2024 |
| CVE-2023-38293 | Certain software builds for the Nokia C200 and Nokia C100 Android devices contain a vulnerable, pre-installed app with a package name of com.tracfone.tfstatus (versionCode=\'31\', versionName=\'12\') that allows local third-party apps to execute arbitrary AT commands in its context (radio user) via AT command injection due to inadequate access control and inadequate input filtering. No permissions or special privileges are necessary to exploit the vulnerability in the com.tracfone.tfstatus app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable device are as follows: Nokia C200 (Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_080:user/release-keys and Nokia/Drake_02US/DRK:12/SP1A.210812.016/02US_1_040:user/release-keys) and Nokia C100 (Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_270:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_190:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_130:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_110:user/release-keys, Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_080:user/release-keys, and Nokia/DrakeLite_02US/DKT:12/SP1A.210812.016/02US_1_050:user/release-keys). This malicious app sends a broadcast Intent to the receiver component named com.tracfone.tfstatus/.TFStatus. This broadcast receiver extracts a string from the Intent and uses it as an extra when it starts the com.tracfone.tfstatus/.TFStatusActivity activity component which uses the externally controlled string as an input to execute an AT command. There are two different injection techniques to successfully inject arbitrary AT commands to execute. | -- | Apr 22, 2024 |
| CVE-2023-38292 | Certain software builds for the TCL 20XE Android device contain a vulnerable, pre-installed app with a package name of com.tct.gcs.hiddenmenuproxy (versionCode=\'2\', versionName=\'v11.0.1.0.0201.0\') that allows local third-party apps to programmatically perform a factory reset due to inadequate access control. No permissions or special privileges are necessary to exploit the vulnerability in the com.tct.gcs.hiddenmenuproxy app. No user interaction is required beyond installing and running a third-party app. The software build fingerprints for each confirmed vulnerable build are as follows: TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB7I-0:user/release-keys and TCL/5087Z_BO/Doha_TMO:11/RP1A.200720.011/PB83-0:user/release-keys. This malicious app sends a broadcast intent to the exported com.tct.gcs.hiddenmenuproxy/.rtn.FactoryResetReceiver receiver component, which initiates a programmatic factory reset. | -- | Apr 22, 2024 |
| CVE-2023-38291 | An issue was discovered in a third-party component related to ro.boot.wifimacaddr, shipped on devices from multiple device manufacturers. Various software builds for the following TCL devices (30Z and 10L) and Motorola devices (Moto G Pure and Moto G Power) leak the Wi-Fi MAC address to a system property that can be accessed by any local app on the device without any permissions or special privileges. Google restricted third-party apps from directly obtaining non-resettable device identifiers in Android 10 and higher, but in these instances they are leaked by a high-privilege process and can be obtained indirectly. The software build fingerprints for each confirmed vulnerable device are as follows: TCL A3X (TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAAZ:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB3:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vAB7:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABA:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABM:user/release-keys, TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABP:user/release-keys, and TCL/A600DL/Delhi_TF:11/RKQ1.201202.002/vABS:user/release-keys); TCL 10L (TCL/T770B/T1_LITE:10/QKQ1.200329.002/3CJ0:user/release-keys and TCL/T770B/T1_LITE:11/RKQ1.210107.001/8BIC:user/release-keys); Motorola Moto G Pure (motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-2/74844:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-7/5cde8:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-10/d67faa:user/release-keys, motorola/ellis_trac/ellis:11/RRHS31.Q3-46-110-13/b4a29:user/release-keys, motorola/ellis_trac/ellis:12/S3RH32.20-42-10/1c2540:user/release-keys, motorola/ellis_trac/ellis:12/S3RHS32.20-42-13-2-1/6368dd:user/release-keys, motorola/ellis_a/ellis:11/RRH31.Q3-46-50-2/20fec:user/release-keys, motorola/ellis_vzw/ellis:11/RRH31.Q3-46-138/103bd:user/release-keys, motorola/ellis_vzw/ellis:11/RRHS31.Q3-46-138-2/e5502:user/release-keys, and motorola/ellis_vzw/ellis:12/S3RHS32.20-42-10-14-2/5e0b0:user/release-keys); and Motorola Moto G Power (motorola/tonga_g/tonga:11/RRQ31.Q3-68-16-2/e5877:user/release-keys and motorola/tonga_g/tonga:12/S3RQS32.20-42-10-6/f876d3:user/release-keys). This malicious app reads from the ro.boot.wifimacaddr system property to indirectly obtain the Wi-Fi MAC address. | -- | Apr 22, 2024 |
| CVE-2023-38290 | Certain software builds for the BLU View 2 and Sharp Rouvo V Android devices contain a vulnerable pre-installed app with a package name of com.evenwell.fqc (versionCode=\'9020801\', versionName=\'9.0208.01\' ; versionCode=\'9020913\', versionName=\'9.0209.13\' ; versionCode=\'9021203\', versionName=\'9.0212.03\') that allows local third-party apps to execute arbitrary shell commands in its context (system user) due to inadequate access control. No permissions or special privileges are necessary to exploit the vulnerability in the com.evenwell.fqc app. No user interaction is required beyond installing and running a third-party app. The vulnerability allows local apps to access sensitive functionality that is generally restricted to pre-installed apps, such as programmatically performing the following actions: granting arbitrary permissions (which can be used to obtain sensitive user data), installing arbitrary apps, video recording the screen, wiping the device (removing the user\'s apps and data), injecting arbitrary input events, calling emergency phone numbers, disabling apps, accessing notifications, and much more. The software build fingerprints for each confirmed vulnerable device are as follows: BLU View 2 (BLU/B131DL/B130DL:11/RP1A.200720.011/1672046950:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1663816427:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1656476696:user/release-keys, BLU/B131DL/B130DL:11/RP1A.200720.011/1647856638:user/release-keys) and Sharp Rouvo V (SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_460:user/release-keys and SHARP/VZW_STTM21VAPP/STTM21VAPP:12/SP1A.210812.016/1KN0_0_530:user/release-keys). This malicious app starts an exported activity named com.evenwell.fqc/.activity.ClickTest, crashes the com.evenwell.fqc app by sending an empty Intent (i.e., having not extras) to the com.evenwell.fqc/.FQCBroadcastReceiver receiver component, and then it sends command arbitrary shell commands to the com.evenwell.fqc/.FQCService service component which executes them with system privileges. | -- | Apr 22, 2024 |
| CVE-2023-7252 | The Tickera WordPress plugin before 3.5.2.5 does not prevent users from leaking other users\' tickets. | -- | Apr 22, 2024 |
| CVE-2022-46897 | An issue was discovered in Insyde InsydeH2O with kernel 5.0 through 5.5. The CapsuleIFWUSmm driver does not check the return value from a method or function. This can prevent it from detecting unexpected states and conditions. | -- | Apr 22, 2024 |
| CVE-2022-35503 | Improper verification of a user input in Open Source MANO v7-v12 allows an authenticated attacker to execute arbitrary code within the LCM module container via a Virtual Network Function (VNF) descriptor. An attacker may be able execute code to change the normal execution of the OSM components, retrieve confidential information, or gain access other parts of a Telco Operator infrastructure other than OSM itself. | -- | Apr 22, 2024 |
| CVE-2022-34562 | A cross-site scripting (XSS) vulnerability in PHPFox v4.8.9 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the status box. | -- | Apr 22, 2024 |
| CVE-2022-34561 | A cross-site scripting (XSS) vulnerability in PHPFox v4.8.9 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the video description parameter. | -- | Apr 22, 2024 |
| CVE-2022-34560 | A cross-site scripting (XSS) vulnerability in PHPFox v4.8.9 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the History parameter. | -- | Apr 22, 2024 |
| CVE-2018-25101 | A vulnerability, which was classified as problematic, has been found in l2c2technologies Koha up to 20180108. This issue affects some unknown processing of the file /cgi-bin/koha/opac-MARCdetail.pl. The manipulation of the argument biblionumber with the input 2><TEST> leads to cross site scripting. The attack may be initiated remotely. The identifier of the patch is 950fc8e101886821879066b33e389a47fb0a9782. It is recommended to upgrade the affected component. The identifier VDB-261677 was assigned to this vulnerability. | -- | Apr 22, 2024 |
| CVE-2015-10132 | A vulnerability classified as problematic was found in Thimo Grauerholz WP-Spreadplugin up to 3.8.6.1 on WordPress. This vulnerability affects unknown code of the file spreadplugin.php. The manipulation of the argument Spreadplugin leads to cross site scripting. The attack can be initiated remotely. Upgrading to version 3.8.6.6 is able to address this issue. The name of the patch is a9b9afc641854698e80aa5dd9ababfc8e0e57d69. It is recommended to upgrade the affected component. The identifier of this vulnerability is VDB-261676. | -- | Apr 22, 2024 |
| CVE-2024-32683 | Authorization Bypass Through User-Controlled Key vulnerability in Wpmet Wp Ultimate Review.This issue affects Wp Ultimate Review: from n/a through 2.2.5. | -- | Apr 19, 2024 |
| CVE-2024-32650 | Rustls is a modern TLS library written in Rust. `rustls::ConnectionCommon::complete_io` could fall into an infinite loop based on network input. When using a blocking rustls server, if a client send a `close_notify` message immediately after `client_hello`, the server\'s `complete_io` will get in an infinite loop. This vulnerability is fixed in 0.23.5, 0.22.4, and 0.21.11. | -- | Apr 19, 2024 |
| CVE-2024-32644 | Evmos is a scalable, high-throughput Proof-of-Stake EVM blockchain that is fully compatible and interoperable with Ethereum. Prior to 17.0.0, there is a way to mint arbitrary tokens due to the possibility to have two different states not in sync during the execution of a transaction. The exploit is based on the fact that to sync the Cosmos SDK state and the EVM one, we rely on the `stateDB.Commit()` method. When we call this method, we iterate though all the `dirtyStorage` and, **if and only if** it is different than the `originStorage`, we set the new state. Setting the new state means we update the Cosmos SDK KVStore. If a contract storage state that is the same before and after a transaction, but is changed during the transaction and can call an external contract after the change, it can be exploited to make the transaction similar to non-atomic. The vulnerability is **critical** since this could lead to drain of funds through creative SC interactions. The issue has been patched in versions >=V17.0.0. | -- | Apr 19, 2024 |
| CVE-2024-32478 | Git Credential Manager (GCM) is a secure Git credential helper. Prior to 2.5.0, the Debian package does not set root ownership on installed files. This allows user 1001 on a multi-user system can replace binary and gain other users\' privileges. This vulnerability is fixed in 2.5.0. | -- | Apr 19, 2024 |
| CVE-2024-32409 | An issue in SEMCMS v.4.8 allows a remote attacker to execute arbitrary code via a crafted script. | -- | Apr 19, 2024 |
| CVE-2024-32206 | A stored cross-site scripting (XSS) vulnerability in the component \\affiche\\admin\\index.php of WUZHICMS v4.1.0 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the $formdata parameter. | -- | Apr 19, 2024 |
| CVE-2024-32166 | Webid v1.2.1 suffers from an Insecure Direct Object Reference (IDOR) - Broken Access Control vulnerability, allowing attackers to buy now an auction that is suspended (horizontal privilege escalation). | -- | Apr 19, 2024 |
| CVE-2024-32038 | Wazuh is a free and open source platform used for threat prevention, detection, and response. There is a buffer overflow hazard in wazuh-analysisd when handling Unicode characters from Windows Eventchannel messages. It impacts Wazuh Manager 3.8.0 and above. This vulnerability is fixed in Wazuh Manager 4.7.2. | -- | Apr 19, 2024 |
| CVE-2024-31846 | An issue was discovered in Italtel Embrace 1.6.4. The web application does not restrict or incorrectly restricts access to a resource from an unauthorized actor. | -- | Apr 19, 2024 |
| CVE-2024-31841 | An issue was discovered in Italtel Embrace 1.6.4. The web server fails to sanitize input data, allowing remote unauthenticated attackers to read arbitrary files on the filesystem. | -- | Apr 19, 2024 |
| CVE-2024-31745 | Libdwarf v0.9.1 was discovered to contain a heap use-after-free via the dw_empty_errlist_item function at /libdwarf/dwarf_alloc.c. | -- | Apr 19, 2024 |
| CVE-2024-31587 | SecuSTATION Camera V2.5.5.3116-S50-SMA-B20160811A and lower allows an unauthenticated attacker to download device configuration files via a crafted request. | -- | Apr 19, 2024 |
| CVE-2024-31552 | CuteHttpFileServer v.3.1 version has an arbitrary file download vulnerability, which allows attackers to download arbitrary files on the server and obtain sensitive information. | -- | Apr 19, 2024 |
| CVE-2024-31547 | Computer Laboratory Management System v1.0 is vulnerable to SQL Injection via the id parameter of /admin/item/view_item.php. | -- | Apr 19, 2024 |
| CVE-2024-31546 | Computer Laboratory Management System v1.0 is vulnerable to SQL Injection via the id parameter of /admin/damage/view_damage.php. | -- | Apr 19, 2024 |
| CVE-2024-29991 | Microsoft Edge (Chromium-based) Security Feature Bypass Vulnerability | -- | Apr 19, 2024 |
| CVE-2024-29969 | When a Brocade SANnav installation is upgraded from Brocade SANnav v2.2.2 to Brocade SANnav 2.3.0, TLS/SSL weak message authentication code ciphers are added by default for port 18082. | -- | Apr 19, 2024 |
| CVE-2024-29968 | An information disclosure vulnerability exists in Brocade SANnav before v2.3.1 and v2.3.0a when Brocade SANnav instances are configured in disaster recovery mode. SQL Table names, column names, and SQL queries are collected in DR standby Supportsave. This could allow authenticated users to access the database structure and its contents. | -- | Apr 19, 2024 |
| CVE-2024-29967 | In Brocade SANnav before Brocade SANnav v2.31 and v2.3.0a, it was observed that Docker instances inside the appliance have insecure mount points, allowing reading and writing access to sensitive files. The vulnerability could allow a sudo privileged user on the host OS to read and write access to these files. | -- | Apr 19, 2024 |
| CVE-2024-29966 | Brocade SANnav OVA before v2.3.1 and v2.3.0a contain hard-coded credentials in the documentation that appear as the appliance\'s root password. The vulnerability could allow an unauthenticated attacker full access to the Brocade SANnav appliance. | -- | Apr 19, 2024 |
| CVE-2024-29965 | In Brocade SANnav before v2.3.1, and v2.3.0a, it is possible to back up the appliance from the web interface or the command line interface (SSH). The resulting backups are world-readable. A local attacker can recover backup files, restore them to a new malicious appliance, and retrieve the passwords of all the switches. | -- | Apr 19, 2024 |
| CVE-2024-29964 | Docker instances in Brocade SANnav before v2.3.1 and v2.3.0a have an insecure architecture and configuration that leads to multiple vulnerabilities. Docker daemons are exposed to the WAN interface, and other vulnerabilities allow total control over the Ova appliance. A Docker instance could access any other instances, and a few could access sensitive files. The vulnerability could allow a sudo privileged user on the underlying OS to access and modify these files. | -- | Apr 19, 2024 |
| CVE-2024-29963 | Brocade SANnav OVA before v2.3.1, and v2.3.0a, contain hardcoded keys used by Docker to reach remote registries over TLS. TLS connections with an exposed key allow an attacker to MITM the traffic. Note: Brocade SANnav doesn\'t have access to remote Docker registries. | -- | Apr 19, 2024 |
| CVE-2024-29962 | Brocade SANnav OVA before v2.3.1 and v2.3.0a have an insecure file permission setting that makes files world-readable. This could allow a local user without the required privileges to access sensitive information or a Java binary. | -- | Apr 19, 2024 |
| CVE-2024-29961 | A vulnerability affects Brocade SANnav before v2.3.1 and v2.3.0a. It allows a Brocade SANnav service to send ping commands in the background at regular intervals to gridgain.com to check if updates are available for the Component. This could make an unauthenticated, remote attacker aware of the behavior and launch a supply-chain attack against a Brocade SANnav appliance. | -- | Apr 19, 2024 |
| CVE-2024-29960 | In the Brocade SANnav server versions before v2.3.1 and v2.3.0a, the SSH keys inside the OVA image are hardcoded and identical in the VM every time SANnav is installed. Any Brocade SANnav VM based on the official OVA images is vulnerable to MITM over SSH. An attacker can decrypt and compromise the SSH traffic to the SANnav appliance. | -- | Apr 19, 2024 |
| CVE-2024-29959 | A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a prints Brocade Fabric OS switch encrypted passwords in the Brocade SANnav Standby node\'s support save. | -- | Apr 19, 2024 |
| CVE-2024-29958 | A vulnerability in Brocade SANnav before v2.3.1 and v2.3.0a prints the encryption key in the console when a privileged user executes the script to replace the Brocade SANnav Management Portal standby node. This could provide attackers an additional, less protected path to acquiring the encryption key. | -- | Apr 19, 2024 |
| CVE-2024-29957 | When Brocade SANnav before v2.3.1 and v2.3.0a servers are configured in Disaster Recovery mode, the encryption key is stored in the DR log files. This could provide attackers with an additional, less-protected path to acquiring the encryption key. | -- | Apr 19, 2024 |
